Aastra OpenPhone 61 Operation & User’s Manual

party, you will bear the costs for the call between these two external callers. You have no way of influencing how long the transferred call will last. The connection is estab- lished via the OpenCom 100 / Aastra 800 and occupies two call channels (ISDN user channels). MenuCard “Subscr (Subscriber) on hold” You are making an internal or external enquiry call … Press (but do not hold down) the MenuCard key , then select the following from the Subscr on hold MenuCard: Transfer: You conne ...

speed-dialling numbers once they have been configured. The two-digit speed- dialling numbers are in the range 00…99, the three-digit are in the range 000…999. Ask your system administrator how many digits are valid. Selecting a Speed-Dialling Destination H Z (SD no.) alternatively: H Z (SD no.) Note If you have the telephone book open, instead of keying in the name, you can also press the key and enter the speed-dialling destination to find the name entry. Alternatively: Ent ...

Further, the system administrator can programme call forwarding where the call number of the caller is analysed (“SCF: Selective Call Forwarding”). Potentially this could be the reason why specific calls do not reach you. If you have any questions concerning this functionality, please consult your system administrator. Least Cost Routing Least Cost Routing (LCR) can be evaluated with call forwarding to external numbers, provided your system administrator has configured LCR and its application in the OpenCom 100 / Aastra 800 correspondingly. Ask you ...

mable call forwarding. These features are set up by the administrator when config- uring the system. To carry out these features the system PIN is required. The system PIN is issued by the system administrator, and it must be changed from the factory setting (“0000”) to another value in order for the features described below to function. In addition, all the owners of voiceboxes can, with the corresponding authorisation, call their voiceboxes from exte ...

91 starting on page 100 also). When programming, enter the device ID of the other terminal but not the destination call number. You can now initiate a respective dial-out for this terminal by first se- lecting a call number from one of the lists or from the phone book and then press the function key. You can, of course, enter other destination call numbers. To do so, first press the function key and then enter the desired call number under Dest.:. Select 3 Not available followed by … • 1 Callback: This leaves a request with another subscriber whose line is busy to ca ...

100 Programming Functions (Features) You can store main menu functions on programmable keys. Press and hold down the key to see the name of the function (in the first line, e.g. Call forwarding). If required, you can change the function (e.g. the destination for call forwarding). Switching Functions On/Off Programmed functions are activated by pressing (without holding down) the key or switched on or off by pressing and holding down the key (e.g. call forwarding). If the key’s LED lights up, the function programmed on it is active (on). If the programmed function confl ...