Acura RDX Navigation Manual

however, to discontinue or change specifications or design at any time without notice and without incurring any obligation. Accessories Precautions The GPS antenna is located in the roof. Trees, tall buildings, freeway/highway overpasses, tunnels, or overhead electrical power wires can easily interrupt or interfere with GPS reception. Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna. Important Safety Information Avoid focusing on the screen or manually operating the system controls while driving. Enter information before you begin driving or when stopped. As you drive, listen to the audible instructions and use voice commands when possible. Pull to the side of the road if you need more time to look at the screen or operate the controls. Route guidance may conflict with street closures, road construction, detours, and out-of-date map data. The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws. 2 System Limitations P. 334 NOTICE This vehicle’s navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste. Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens. 3 WARNING Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed. Only operate system controls when the conditions permit you to safely do so. 00X31-TX4-8500 2018 RDX Navigation Manual BNM-05468

Start-up 20 Voice Control System 22 Interface Settings 26 Personal Information 38 Routing 53 Guidance 62 Map 69 On Demand Multi-Use DisplayTM 87 Customized Features 88 Data Reset 113 2 Navigation P. 115 Entering a Destination 116 Calculating the Route 141 Driving to Your Destination 144 Map Menu 151 Changing Your Route 159 Changing Your Destination 168 Resuming Your Trip 171 2 Audio P. 173 Audio System 174 Audio Remote Controls 179 Audio Settings 181 Playing FM/AM Radio 184 Playing SiriusXM® Radio 190 Playing a Disc 205 Playing Hard Disc Drive (HDD) Audio 212 Playing an iPod 224 Playing Internet Radio 236 Playing a USB Flash Drive 241 Playing Bluetooth® Audio 247 2 Bluetooth® HandsFreeLink® P. 251 Bluetooth® HandsFreeLink® 252 Text/E-mail Message 285 Roadside Assistance 292 HFL Menus 293 2 AcuraLink® Messages P. 297 AcuraLink® 298 2 Other Features P. 309 Trip Computer 310 Calendar 311 Information Functions 312 Multi-View Rear Camera 314 2 Troubleshooting P. 315 Troubleshooting 316 Error Messages 323 2 Reference Information P. 331 System Initialization 332 System Limitations 334 Client Assistance 336 Legal Information 339 2 Voice Commands P. 345 Voice Commands 346 Quick Reference Guide P. 2 System Setup P. 19 Navigation P. 115 Audio P. 173 Bluetooth® HandsFreeLink® P. 251 AcuraLink® Messages P. 297 Other Features P. 309 Troubleshooting P. 315 Reference Information P. 331 Voice Commands P. 345 Index P. 351

Quick Reference Guide Overview—Functions at a Glance Navigation You can select any place/landmark as a destination by using voice control or the Interface Dial. The navigation system gives you turn-by-turn driving directions to your destination. Store home address (P46) Register 1 home address. Track route (P144) Follow your route in real-time with voice guidance. AcuraLink Real-Time TrafficTM (P156) Bypass congestion and traffic incidents. Subscription service Store contacts (P39) Store up to 200 contacts in 2 address books. Enter destination (P116) Select your destination using 13 methods. Select route (P143) Set route preferences and select one of 3 routes. Avoid certain areas (P60) Set streets and areas to detour around. Add waypoints (P161) Add up to 4 “pit stops” along your route.

Helps you check for obstacles around the rear of your vehicle on the audio/information screen when reversing. Audio The advanced audio system provides clear, well-defined sound and makes the most of your music. Enjoy listening to a variety of audio sources, such as: Other Features Multi-View Rear Camera (P314) FM/AM Radio (P184) SiriusXM® Radio (P190) Compact Disc (P205) Hard Disc Drive (HDD) (P212) iPod (P224) Internet Radio (P236) Bluetooth® Audio (P247) USB Flash Drive (P241) AcuraLink® (P298) AcuraLink® provides you with important information and messages between your vehicle and Acura. Voice Control (P22) Use voice commands for safer system control while driving. You can operate all key functions of the navigation, audio, Bluetooth® HandsFreeLink®, and climate control systems. Bluetooth® HandsFreeLink® (P252) Pair a compatible mobile phone to receive incoming and make outgoing calls. You can operate the phone features without ever taking your hands off the wheel.

System Controls On Demand Multi-Use DisplayTM Navigation Screen Audio Navigation Voice Control Bluetooth® HandsFreeLink® li AUDIO Button (P174) lb Microphone (P252) ld MODE Button (P179) 6 Interface Dial/ENTER Button (P7) 4 BACK Button 7 INFO Button lf (Pick-Up) Button (P252) 8 MENU Button 9 SETTINGS Button 3 NAV Button 1 PHONE Button (P252) lg (Hang-Up/Back) Button (P252) lh (Talk) Button (P6) 5 (Display Mode) Button (P74) le CH Button (P180) 2 (Power) Button/ Volume Knob la (Eject) Button lc VOL Button (P179)

On Demand Multi-Use DisplayTM Basic Operation Shortcuts Audio Source More Places (P44) Phone (P265) Audio (P177) Select to change an audio source. You can change the position of icons. Select to display the menu items. FM/AM/SiriusXM®/Pandora®*/AhaTM : : Select the preset station (FM/AM/Pandora*/Aha). Select to search that category/channel on the tune screen (SiriusXM). Select and hold to search that station/channel on the preset screen (AM/FM/SiriusXM). Select and hold to search up or down 10 channels on the tune screen (SiriusXM). Select to search the selected band for a station with a strong signal. (AM/FM) Select the channel. In channel mode, select and hold to change the channel rapidly. (SiriusXM) Select to skip to the next/previous channel on the tune screen. Select and hold to fast-forward/fast-rewind the current selection on tune screen (SiriusXM). Select a song (Pandora*) or contents (Aha). Select and hold a desired number where you want to store the station/channel. Select to listen to a preset station/channel. Select Tune. Select Presets. Pandora® is available on U.S. models only. *: Select to display the shortcut menu. CD/HDD/USB flash drive/Bluetooth® Audio : : Select to skip to the next folder, and to skip to the beginning of the previous folder. Select to change tracks. Select and hold to move rapidly within a track. iPod Album bar: : Select an album. Select to change tracks. Select and hold to move rapidly within a track.

Voice Control Operation Voice Portal Screen a Press and release the (Talk) button on the top screen of any mode. The system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt.  The system beeps when ready for a command. Press the (Hang-Up/ Back) button to cancel.  Available voice commands are highlighted on the screen. b Say a voice command. After that, follow the voice prompt and say a voice command.  The audio system is muted during voice control mode.  You can use other voice commands on the Voice Portal screen. The system recognizes only certain commands. Available navigation voice commands (P346)  Say “Voice Help” to enter supported commands for the current screen. A voice help tutorial is also available. Voice Help (P15)  During the voice control mode, press and hold the (Hang-Up/Back) button to return to the Voice Portal screen.  Set Voice Prompt to Off to bypass the voice prompt. Voice Recognition Settings (P24)  Carefully read the usage note for the voice control. Voice Control System (P22)

Interface Dial/ENTER Button Operation Rotate dial Changes scale Map screens Press ENTER Selects function Selects map icon Map screens Move up down left right Highlights menu options Menu screens Selects highlighted option Menu screens Selecting Icon You will see these icons in each chapter. They represent how you can operate the Interface Dial. Move up Move left Move right Scrolls map (8 directions) Map screens Selects labeled function Menu screens Rotate dial Press ENTER Move down

How to Enter Information You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screen. Using the Interface Dial Rotate to highlight a character.  Select to display upper/lower case characters.  Select to display symbols and accented characters.  Select (or move ) to edit the entered characters. Press to enter the highlighted character.  Move to select Space to enter a space character.  Move to select Delete to remove the last entered character.  You can also use the touchscreen to enter information. Scrolling through lists or tabs is limited while the vehicle is moving. Certain screen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed. Number of Hits On input search screens, the number of hits in the map database is displayed. Move to select OK to display a list of possible entries.

Map Screen Legend GPS signal strength Best reception Feature areas Park Streets Map scale (P81) No icon: Poor/No reception Good reception Hospital Shopping Mall Golf Course Airport/Business Water Area Cemetery University Current street name Current vehicle position (P79) Freeways/highways State routes Verified streets Unverified streets One-way streets Acura dealer AcuraLink® Message icon (P14) AcuraLink® signal indicator (P307) Landmark icons (P71) Honda dealer (U.S.) Honda dealer (Canada) School Parking lot Gas station Hospital Post office Restaurant Freeway exit information (U.S.) / Highway exit information (Canada) Parking garage Grocery store Hotel/Lodging ATM Map orientation (P76) North up Current map scale Heading up 3D map

During Route Guidance During route guidance, route information is displayed on the map screen and guidance screen. Press the NAV button to toggle between the map and guidance screen. Map Screen Guidance Screen Guide to destination or waypoint Estimated time to destination (waypoint) Distance to destination (waypoint) Distance of the actual route. Waypoint (P161) Tracking dots (P148) Next guidance indicator Distance to the next guidance point. Calculated route (unverified roads) (P146) Destination icon Calculated route (P144) Guide to destination or waypoint Estimated time to destination (waypoint) Distance to destination (waypoint) Distance of the actual route. Guidance point Guidance point No entry icon Guidance indicator Street name of guidance point and distance to the guidance point. Lane guidance Day or Night Mode Press the (Display Mode) button to manually switch between day and night mode. Turn-by-Turn Directions The next guidance point appears on the multi-information display. Day mode Night mode Multi-information Display Remaining distance Street name of next guidance point Next driving maneuver is approaching

Navigation—Home Addresses and Going Home The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home. Storing Your Home Address a Press the SETTINGS button. b Rotate to select Navi Settings. Press . c Rotate to select Edit Go Home. Press . d Rotate to select Name. Press . e Enter a name. f Rotate to select Address. Press . g Enter an address. h Rotate to select Phone No. Press . i Enter a phone number. j Move and rotate to select OK. Press . Going Home a From the map screen, press the MENU button. b Rotate to select Go Home. Press . c Rotate to select Set as Destination. Press .

Navigation—Entering a Destination Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination. a From the map screen, press the MENU button. b Rotate to select Address. Press . c Rotate to select Street. Press . d Enter the name of your destination street. e Rotate to select your destination street from the list. Press . f Enter the street number. Move to select OK when finished. g If there is more than one city with the specified street, a list of cities is displayed. Rotate to select the desired city from the list. Press . h Rotate to select Set as Destination. Press . Route guidance to the destination begins.  View Routes: Choose one of three routes.  Route Preference: Choose Max or Min for the five settings.

Navigation—Changing Route or Destination You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance. Adding a Waypoint (“Pit Stop”) You can add up to four waypoints along your route. (P161) a From the map screen, press the MENU button. b Rotate to select Destination List. Press . c Rotate to select Add New Destination. Press . d Rotate to select Find Along Route. Press . e Rotate to select location and search method. Press .  Search Around: Search around a location.  Search Along: Search between two locations. Changing Your Destination There are several methods you can use to specify a new destination during route guidance.  Selecting an icon on the map (P169) Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Press twice.  Entering a new destination (P170) Press the MENU button. Move to select Destination and enter a new destination. f Select the icon category and location to add to the Destination List when prompted. Edit the order of destinations if necessary. g Move and rotate to select Start Route. Press . Canceling Your Route a Press the MENU button. b Rotate to select Cancel Route. Press .

AcuraLink® AcuraLink® Messages AcuraLink® provides a direct communication link between you and Acura. It sends and receives several kinds of messages through the Acura server. AcuraLink Real-Time TrafficTM Displays continuously updated traffic information and recalculates your route in response to traffic flow, incidents, or road closures. (P156) The following features are available:  Vehicle feature guide  Operating quick tips  Safety and maintenance information  Diagnostic information  Dealer appointment and maintenance reminders Traffic information available Traffic information off or map scale too large No icon: Out of coverage area Traffic incident icons Traffic status indicator (P156) Traffic flow indicator Congestion Incident Weather Heavy Moderate Free-flow Construction Road Closed NOTE: AcuraLink Real-Time TrafficTM is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/acuralink (Canada).

Voice Help This navigation system comes with voice help, which shows you what command to say when using the voice command functions. Command Help a Press and release the (Talk) button. b Say “Voice Help.” The voice help screen is displayed. The “Voice Help” command is available on most screens. c Say one of the options for a list of available commands by category (e.g., “Navigation Commands”). d Say one of the options for a list of available commands by category (e.g., “Find Place Commands”). e The system displays a list of all available commands for the category. Press to hear the list read aloud. Getting Started Tutorial a Move and rotate to select Getting Started on the voice help screen. Press . For “Voice Settings” and “All Commands.” (P24, 346) b The system reads the tips for the voice control.  Rotate to read the tips.  Move or to display the previous/next page.

Troubleshooting For more Information (P315) Why does the vehicle position icon on the map “lag” a short distance behind my actual position, especially at intersections? This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal. Why does the “time to destination” display sometimes increase even though I am getting closer to my destination? The “time to destination” is based on your actual road speed and traffic conditions to give you a better estimate of arrival time. How do I specify a destination when an entered city or street could not be found? Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered. How do I turn on the navigation system voice guidance? On the map screen, press to display the Map Menu. Rotate to select Guidance Volume. Adjust the preferred volume level. My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it? In most cases, you do not need to enter a code. Simply press and hold the (Power) button for two seconds; the system should reactivate. 2 System Initialization P. 332

This section explains different methods on how you can easily find information in this manual. Searching the Table of Contents (P1) First, find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book). Then, go to that chapter to view a more specific table of contents. Searching the Index (P351) This more detailed table of contents shows you exactly what information is listed by section and title. The Index consists of main terms and sub-entries. The sub-entries help you get to the desired page depending on what you are looking for. Table of Contents Chapter Contents Navigation Screen Index Two types of Tables of Contents help you find your desired information. Menu items displayed on the navigation screen (e.g., Address Book) can be found individually in the Index. More Detailed Contents Go to the Next page

system control panel. Menu Tree The menu tree helps guide you through the system's menu options. To get to your desired function, follow the menu tree in order of the steps shown. All menu options can also be activated with voice commands. Press the MENU button. Select the menu option with the Interface Dial. After following the menu tree, step-by-step instructions explain how to achieve the desired result. Sample pages and images in this section may differ from the actual ones. Rotate to select Address Book. Press . MENU button Address Book

Start-up ................................................... 20 Voice Control System ............................. 22 Command Input .................................... 22 Voice Recognition .................................. 23 Voice Recognition Settings..................... 24 Siri Eyes Free .......................................... 25 Interface Settings ................................... 26 Personal Information.............................. 38 Address Book......................................... 39 Home Address ....................................... 46 PIN Numbers.......................................... 47 Previous Destination............................... 48 Category History .................................... 49 Download POI........................................ 50 Routing.....................................................53 Route Preference ....................................54 Unverified Routing ..................................56 Traffic Rerouting .....................................58 Edit POI Search Radius Along Route ........59 Avoided Area..........................................60 Guidance ..................................................62 Guidance Mode ......................................63 Street Name Guidance ............................65 Non-map Screens....................................66 Guidance Point .......................................67 Estimated Time .......................................68 Map...........................................................69 Showing Icons on Map ...........................71 Color ..................................................... 73 View (Map Orientation).......................... 76 3D Angle Adjustment............................. 77 Straight Line Guide ................................ 78 Current Location .................................... 79 Map Legend........................................... 80 Display Tracking ..................................... 84 Correct Vehicle Position ......................... 86 On Demand Multi-Use DisplayTM ........... 87 Changing the Screen Settings ................ 87 Customized Features .............................. 88 Data Reset ............................................. 113 Defaulting All the Settings.................... 113

ACCESSORY or ON. At start-up, the following Confirmation screen is displayed. 1. Press to select OK. u If you do not select OK, the map screen is displayed after a certain period of time. u Your current position is displayed on the map screen. 2. Press the NAV button if a different mode is selected. u Your current position is displayed on the map screen. 1 Start-up If the navigation system loses power at any time, you may need to press and hold the (Power) button for more than two seconds, or you may be prompted for the five-digit security code. 2 System Initialization P. 332 At start-up, the driver’s keyless access remote is automatically detected and the address book settings, setup preferences, wallpapers, and audio settings for that driver (e.g., Driver 1) are loaded. “OK” on the Confirmation screen cannot be selected by using a voice command. The first time the NAV or any other mode button is pressed after you set the power mode to ACCESSORY or ON, a message guiding you to its menu screen is displayed.

disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option using the Interface Dial until the vehicle is stopped. Voice commands are still operable while the vehicle is in motion. ■Limitations for Manual Operation Disabled option

Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. The voice control system uses the (Talk) and (Hang-Up/Back) buttons on the steering wheel and a microphone near the map lights on the ceiling. A “Getting Started” feature provides a tutorial that explains how to use the voice control system. 2 Getting Started Tutorial P. 15 Command Input If the system does not understand a command or you wait too long to give a command, the system asks you to repeat the command. When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased. If the system cannot perform a command or the command is not appropriate for the screen you are on, the system beeps. On character input screens, a list of possible characters is displayed if the system does not recognize your command. You can find out which voice commands are available for a particular screen using the “Voice Help” command. The system will display and read the list of available commands to you. 2 Voice Help P. 15 1 Voice Control System When you press the (Talk) button, the system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt and give a command. 1 Command Input The audio system is muted while using the voice control system.

System Setup Voice Recognition To achieve optimum voice recognition when using the navigation voice control system: • Make sure the correct screen is displayed for the voice command that you are using. The system recognizes only certain commands. Available navigation voice command. 2 Voice Commands P. 346 • Close the windows and moonroof. • Adjust the dashboard and side vents so air does not blow onto the microphone on the ceiling. • Speak clearly in a clear, natural speaking voice without pausing between words. • Reduce any background noise and the climate controls fan speed if possible. The system may misinterpret your command if more than one person is speaking at the same time. • Refer to the Voice Help feature. 2 Voice Help P. 15 1 Voice Recognition The voice control system can only be used from the driver’s seat because the microphone unit removes noises from the front passenger’s side.

System Setup Voice Recognition Settings H SETTINGS button u System Settings u Voice Reco Rotate to select an item. Press . The following items are available: • Voice Prompt: Turns the voice prompt on or off. On (factory default): Provides the voice prompts. Off: Disable the feature. • Song By Voice: Turns the Song By VoiceTM on or off. 2 Settings Song By VoiceTM (SBV) P. 231 • Song By Voice Phonetic Modification: Modifies a voice command of music stored in the HDD or an iPod. 2 Phonetic Modification P. 233 • Phonebook Phonetic Modification: Modifies a voice command for the phonebook. 2 Phonebook Phonetic Modification P. 268 • Guidance Volume: Adjusts the voice prompt volume level. 2 Sound and Beep Settings P. 27

System Setup Siri Eyes Free When your compatible iPhone is paired and linked to the system via Bluetooth®, you can say Siri-related commands. Make sure Siri on your iPhone is turned on. 2 Pairing a Phone P. 255 1. Press and hold the (Talk) button for more than two seconds until you hear the Siri tone. 2. Talk to Siri. u When you hear the Siri tone, you can continue to respond without pressing any button. If the Siri tone times out, you have to press and hold the (Talk) button again to reactivate Siri Eyes Free. u Press the (Hang-Up/ Back) button to cancel Siri Eyes Free. 1 Siri Eyes Free iPhone and Siri are trademarks of Apple, Inc. Siri Eyes Free is available only on iPhone with iOS 6.0 and above. Some commands work only on specific phone features or apps. Some features may not be available for all countries or all areas. For details about Siri, refer to http:// www.apple.com. We recommend against using Siri other than in Eyes Free mode while operating a vehicle. On Siri Eyes Free, the display remains the same and no feedback or commands appear. While using Siri, you cannot operate the system with the built-in voice recognition.

Adjusts the screen’s preferences. 1. Rotate to select an item. Press . 2. Rotate to make the adjustment. Press . The following items are available: • Sync Display Brightness: Selects whether the display brightness synchronizes with the instrument panel brightness. • Brightness: Adjusts the screen’s brightness. • Contrast: Adjusts the screen’s contrast. • Black Level: Adjusts the screen’s black level. 1 Display Settings You can set separate daytime and nighttime settings for Brightness, Contrast, and Black Level. Adjust each setting when the display is in either daytime or nighttime mode.

System Setup Sound and Beep Settings H SETTINGS button u System Settings u Sound/Beep Changes the system sound and beep settings. Rotate to select an item. Press . The following items are available: • Guidance Volume: Adjusts the navigation system volume level. • Verbal Reminder: Turns the verbal reminders on and off. On: Sets the verbal reminders. Off: Disables the feature. 1 Sound and Beep Settings Guidance Volume If you set Guidance Volume to 0, you will not hear route guidance or voice command confirmations. You can also adjust Guidance Volume by rotating the volume knob while the route guidance or voice command confirmations is announced. If you then select Voice in the Map Menu, you will hear route guidance at the default volume.

System Setup Clock Adjustment H SETTINGS button u System Settings u Clock Set the automatic adjustment of the system clock for daylight saving and international time zones. Rotate to select an item. Press . The following items are available: • Clock/Wallpaper Type: Changes the clock display type and the wallpaper type. 2 Setting the Clock Type P. 29 • Clock Adjustment: Adjust the current time manually. 2 Setting the Clock P. 29 • Clock Format: Sets the time notation to either 12-hour clock (12H, factory default) or 24-hour clock (24H). • Auto Time Zone: The navigation system automatically adjusts the clock when driving through different time zones. On (factory default): Adjusts the clock automatically. Off: Disables the feature. • Auto Daylight: The navigation system automatically adjusts the clock (“spring ahead” or “fall back” by one hour) when a daylight saving time change occurs. On (factory default): Adjusts the clock automatically. Off: Disables the feature. • Clock Reset: Resets the settings of all items in the Clock group. 1 Clock Adjustment Auto Time Zone If you live and work in two different time zones, you may want to turn Auto Time Zone to OFF. When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times. Auto Daylight This function is not activated in areas that have not adopted daylight saving time, even if you have set Auto Daylight to ON. You can turn the clock display in the navigation screen on and off. 2 Header Clock Display P. 37

System Setup H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Clock 1. Rotate to select an option to change the design. Press . 2. Move to select OK. Press . H SETTINGS button u System Settings u Clock u Clock Adjustment 1. Rotate to select an item. Press . 2. Rotate to select a minute. Press . ■Setting the Clock Type ■Setting the Clock

System Setup Wallpaper Settings Select, delete, and import wallpaper pictures for display on the screen. H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type 1. Connect the USB flash drive to the USB port. 2. Move to select Wallpaper. u The screen will change to the wallpaper list. 3. Move and rotate to select Add New Wallpaper. Press . 4. Rotate to select a desired picture. Press . u The preview is displayed on the left side on the screen. 5. Move and rotate to select Start Import. Press . u The confirmation message will appear. Then the display will return to the wallpaper list. ■Import Wallpaper 1 Wallpaper Settings • When importing wallpaper files, the image must be in the USB flash drive’s root directory. Images in a folder cannot be imported. • The file name must be fewer than 255 characters. • The file format of the image that can be imported is BMP (bmp) or JPEG (jpg). • The individual file size limit is 10 MB. • The maximum image size is 5,800 × 5,800 pixels. • Up to 10 files can be saved for each driver (Driver 1 and Driver 2). • If the USB flash drive does not have any pictures, the No files detected message appears.

System Setup H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Wallpaper 1. Rotate to select a desired wallpaper. Press . u The preview is displayed on the left side on the screen. u The pop-up menu appears on the screen. 2. Rotate to select Set. Press . u The display will return to the wallpaper list. ■Select Wallpaper 1 Select Wallpaper From the pop-up menu, rotate to select Preview and press to see a preview at full-size screen. To go back to the previous screen, press to select OK, or press the BACK button. When the file size is large, it takes a while to be previewed.

System Setup H SETTINGS button u System Settings u Clock u Clock/Wallpaper Type u Wallpaper 1. Rotate to select a wallpaper that you want to delete. Press . u The preview is displayed on the left side on the screen. u The pop-up menu appears on the screen. 2. Rotate to select Delete. Press . u The confirmation message will appear. 3. Rotate to select Yes. Press . u The display will return to the wallpaper list. ■Delete Wallpaper

System Setup Unit Settings H SETTINGS button u System Settings u Others u Units Sets the map units to either mile or km. Rotate to select the map unit. Press .

System Setup Language Settings H SETTINGS button u System Settings u Others u Language Set the system language used on all screens. You can choose from three languages: English, Français (French), Español (Spanish). Rotate to select the system language. Press . 1 Language Settings Voice confirmation of cities and streets only occurs when English is the system language. When Français or Español is selected, some messages continue to be displayed in English.

System Setup Voice Command Tips H SETTINGS button u System Settings u Others u Voice Command Tips Alerts you when manual control of the system is disabled to prevent distraction while driving. Only voice commands are available. Rotate to select the map unit. Press . The following items are available: • On (factory default): Displays a message. • Off: Disables the message.

System Setup Background Color H SETTINGS button u System Settings u Others u Background Color Changes the background color of the navigation screen and the On Demand Multi- Use DisplayTM. Rotate to select a desired color. Press .

System Setup Header Clock Display H SETTINGS button u System Settings u Others u Header Clock Display Selects whether the clock display comes on. Rotate to select an option. Press . The following options are available: • On (factory default): The system displays the clock in the navigation screen. • Off: Disables the feature.

Use the personal information menu to select and set your address books, home address, and PINs. You can also delete unwanted destinations from the list of previously routed destinations. Rotate to select an item. Press . The following items are available: • Address Book: Stores new addresses or edits your address book. 2 Address Book P. 39 • Edit Go Home: Sets or edits your home address. 2 Home Address P. 46 • PIN Number: Sets or changes your PIN. 2 PIN Numbers P. 47 • Previous Destination: Deletes the destination history. 2 Previous Destination P. 48 • Category History: Deletes the place categories you recently used. 2 Category History P. 49 • Download POI: Edits and deletes the Imported POI categories. 2 Download POI P. 50 1 Personal Information Personal information cannot be backed up or moved to another navigation system.

Continued System Setup Address Book H SETTINGS button u Navi Settings u Personal Info u Address Book Store up to 200 address entries in two address books (Driver 1 and Driver 2). You can add, edit, and delete information in the address books. Move or to display only the addresses in the selected category. Move to change the user address book (Driver 1 or Driver 2). 1 Address Book Up to 200 addresses can be stored to each address book of Driver 1 and Driver 2 separately. If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional. 2 PIN Numbers P. 47 Any address book categories you create are also displayed. 2 Selecting an Address Book Category P. 42

40 System Setup H SETTINGS button u Navi Settings u Personal Info u Address Book This section explains how to enter the name and address. 1. Move and rotate to select Add New Address. Press . 2. Rotate to select an item. Press . The following items are available: • Name: Edits the name of the entry. • Address: Edits the address of the entry. • Phone No.: Edits the phone number of the entry. • Category: Specifies the category of the entry. ■Adding an Address Book Entry 1 Adding an Address Book Entry If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry. “Address” is the only required field.

System Setup • Alert: Alerts you when you approach the address entry. On: Beeps and displays a message when your vehicle gets near the entry. Off (factory default): Disables the feature. 3. Rotate to select Name. Press . 4. Enter a name or title. Move to select OK. 5. Rotate to select Address. Press . 6. Rotate to select an item for specifying the address. Press . The following items are available: • Address: Enter an address on the character input screen when prompted. 2 Address P. 118 • Previous Destinations: Select a previous destination. 2 Previous Destination P. 126 • Current Position: Select your current location. • Place Category: Select a category to search for a place/landmark (e.g., Banking, Lodging). 2 Place Category P. 127 • Local Search: Sets a destination by using Local Search. 2 Local Search P. 129 • Place Name: Enter the name of a place/landmark. 2 Place Name P. 131 • More Search Methods: Displays additional search method entries. 2 Entering a Destination P. 116 1 Adding an Address Book Entry When you use Place Name or Place Category, the phone number is automatically entered. You can also add a phone number and category.

42 System Setup H SETTINGS button u Navi Settings u Personal Info u Address Book 1. Rotate to select the address to edit. Press . 2. Enter the name, address, phone number, and category fields. 2 Adding an Address Book Entry P. 40 3. Move and rotate to select OK. Press . H SETTINGS button u Navi Settings u Personal Info u Address Book 1. Rotate to select an address. Press . 2. Rotate to select Category. Press . 3. Rotate to select a category. Press . u Create a category in advance. 2 Creating a new category P. 43 ■Editing an Address Book Entry 1 Editing an Address Book Entry The entered contents are displayed on the Edit address screen. ■Selecting an Address Book Category 1 Selecting an Address Book Category Up to 100 categories (including “Unfiled”) can be stored to each address book of Driver 1 and Driver 2 separately. If you delete a category that is used by other addresses, the category type for those addresses changes to “Unfiled.”

System Setup ■ Creating a new category 1. Move and rotate to select New Category. Press . 2. Enter a name and select an icon when prompted. u The created category is displayed in the list of categories. ■ Deleting or Editing a category 1. Move and rotate to select Delete or Edit. Press . 2. Delete an existing category, or change the name and icon. u The selected category to delete is indicated with a trash icon. Move and rotate to select OK. H SETTINGS button u Navi Settings u Personal Info u Address Book 1. Rotate to select the address to delete. Press . 2. Move and rotate to select Delete. Press . 3. Rotate to select Yes. Press to delete the address. ■Deleting an Address Book Entry 1 Deleting an Address Book Entry When you transfer the vehicle to a third party, delete all address book entries.

System Setup You can store up to six addresses previously stored in your Address Book, and a home address for your preset destinations. ■ Storing an address on the shortcut 1. Select Shortcuts. 2. Select Places. 3. Select Edit or No Entry. u If you select No Entry, go to step 6. 4. Select Add. u All six preset icons appear. 5. Select the preset number to which you want to store an address. u The screen changes to a list of addresses stored in your address book. ■Setting Place Shortcuts

System Setup 6. Select an address you want to store as a preset. ■ Deleting a preset address 1. Select Shortcuts. 2. Select Places. 3. Select Edit. 4. Select Delete. 5. Select the preset number with the destination you want to delete.

System Setup Home Address H SETTINGS button u Navi Settings u Personal Info u Edit Go Home Set a home address that you frequently use. 1. Edit the name, address, and phone number the same way as an address in the address book. 2 Adding an Address Book Entry P. 40 2. Move and rotate to select OK. Press . 1 Home Address If you have PIN-protected your home addresses, enter your PIN when prompted. Press to select OK. PINs are optional. 2 PIN Numbers P. 47 If your home street is not in the system database, park on the nearest verified street to your home. When entering the “Address” field, rotate to select Current Position to use your current location as the home address and press . You can delete a home address if necessary. Move and rotate to select Clear Home Entry. Press . Rotate to select Yes. Press . When you transfer the vehicle to a third party, delete all home addresses. The home icon is shown on the map screen on the 1/20 and 1/8 mile (80 and 200 m) scales.

System Setup PIN Numbers H SETTINGS button u Navi Settings u Personal Info u PIN Number Set a four-digit PIN for protecting personal addresses and your home address. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address. 1. Rotate to select the PIN to create. Press . 2. Rotate to select a digit to enter. Press to select OK. Repeat to enter a new four-digit PIN. 3. Re-enter the new PIN, when prompted, to confirm the number you just entered. Press to select OK. u If you have not entered the same number both times, an “INCORRECT PIN” message is displayed. Enter your PIN again. 1 PIN Numbers PIN Personal Identification Number (PIN) is a password used to access personal data. PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, a dealer will have to reset the navigation system and all of your stored information will be erased. The factory default is no PIN. If you want to stop using a PIN, move to select Turn Off PIN Entry. Press .

System Setup Previous Destination H SETTINGS button u Navi Settings u Personal Info u Previous Destination The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list. 1. Rotate to select the destination to delete. Press . u Repeat the procedure as necessary. u Items to be deleted are indicated with a trash icon. 2. Move and rotate to select OK to delete the selected destinations. 1 Previous Destination Up to 50 destinations can be stored. To cancel the selection of a previous destination, rotate to highlight the destination again. Press to de-select it. Trash icon

System Setup Category History H SETTINGS button u Navi Settings u Personal Info u Category History The navigation system maintains a list of your recently used place categories as a shortcut for selecting the same categories in the future. You can delete some or all of your recently used categories from the list. 1. Rotate to select the category to delete. Press . u Repeat the procedure as necessary. u Items to be deleted are indicated with a trash icon. 2. Move and rotate to select OK to delete the selected categories. 1 Category History Up to 50 categories can be stored. To cancel the selection of a category, rotate to highlight the category again. Press to de-select it. Trash icon

System Setup Download POI Import custom Points of Interest (POI) into the navigation system and set the POI as a destination. You can also add, edit, and delete POIs. H MENU button (on map) u More Search Methods u Download POI 1. Connect a USB flash drive with stored POI data to the USB connector. 2. Move and rotate to select Import from USB. Press . ■Importing POI Categories 1 Importing POI Categories For more information about connecting a USB flash drive. 2 Connecting a USB Flash Drive P. 241 POI data in csv and kml formats can be imported. You can download POI data from various POI websites. If you select From AcuraLink, you can download POI data from the AcuraLink® server. 2 AcuraLink® P. 298

System Setup 3. Rotate to select a category to import. Press . H SETTINGS button u Navi Settings u Personal Info u Download POI 1. Rotate to select the downloaded POI category to edit. Press . ■Editing POI Categories 1 Editing POI Categories If you select From AcuraLink, you can edit Alert only.

System Setup 2. Rotate to select an item. Press . The following items are available: • Alert Setting: Alerts you when you approach the places/landmarks in the category. On: Beeps and displays a message when your vehicle gets near the places/ landmarks in the category. Off (factory default): Disables the feature. • Delete Category: Deletes all places/landmarks and icon in the selected category. • Edit Icon: Changes the category icon.

Choose various settings that determine the navigation system functionality during route calculation. Rotate to select an item. Press . The following items are available: • Route Preference: Changes the route preferences (calculating method). 2 Route Preference P. 54 • Unverified Routing: Sets whether you use the route guidance in unverified areas. 2 Unverified Routing P. 56 • Traffic Rerouting: Sets whether you use automatic recalculation based on traffic information. 2 Traffic Rerouting P. 58 • Edit POI Search Radius Along Route: Sets the distance from the route to find waypoints. 2 Edit POI Search Radius Along Route P. 59 • Avoided Area: Specifies areas to avoid when calculating a route. 2 Avoided Area P. 60

Change the route preference by selecting minimum or maximum driving methods. 1. Rotate to select an item. Press . 2. Rotate to select Min or Max. Press . u Repeat step 1 and 2 as necessary. 3. Move to select OK. Press . 1 Route Preference The calculated route may be the shortest route or the route you would choose. For safety reasons, the system generally applies the following rules to your route: • Shortcuts through residential areas are avoided. • Right turns are favored over left turns or U-turns. • Time-restricted turns (turns prohibited at certain times of the day) are not used. Check the ferry schedule when the calculated route includes ferry route. ETC is short for the Electronic Toll Collection system. Server Route • You can view three routes distributed from AcuraLink®. 2 Viewing the Routes P. 143 • Set to On and select Optimal route to select your desired route. 2 Optimal Routes P. 55

You can select desired routes by sorting the route list. The three top routes can be displayed on the Select a route screen. 2 Viewing the Routes P. 143 1. Move and rotate to select Optimal Routes. Press . 2. Rotate to select a route type. Press . 3. Move and rotate to select OK. Press . ■Optimal Routes 1 Optimal Routes Optimal Routes is a subscription service. For more information, contact an Acura dealer or visit owners.acura.com (U.S.) or www.acura.ca/owners/ acuralink (Canada).

Receive turn-by-turn map and voice guidance in unverified areas. Rotate to select On or Off. Press . 1 Unverified Routing Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate, and can contain errors in location, naming, and address range. Unverified roads are shown only when viewing the map in the 1/20, 1/8, 1/4, 1/2, 1 and 2 (mile) / 80, 200, 400, 800 (m), 1.6 and 3.2 (km) map scales. Straight line guide Blue-pink route line Differences Off On (factory default) On or Off? The driver wishes to manually navigate using the navigation map and choose the streets that lead to the destination. The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate. Route calculation Route is usually longer, using verified roads whenever possible. Route is shorter, but uses unverified (purple) streets that may not be accurate.

streets only (when possible). If Straight Line Guide is set to On, a pink vector line is displayed on the map that continually points to your destination. 2 Straight Line Guide P. 78 A blue-pink route line highlights suggested unverified streets on the map while traveling to your destination. Cautionary messages Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when starting route guidance, approaching an unverified area, and entering an unverified street. Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when entering an unverified street. Guidance (map/voice) There is no turn-by-turn map or voice guidance. Voice guidance commands end with the phrase “if possible” to remind you to verify all traffic restrictions. Directions list A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road. A direction list is provided showing street names and turn symbols in pink. Differences Off On (factory default)

A faster route can be calculated based on continuously updated traffic information. 2 Traffic ReroutingTM P. 156 Rotate to select an option. Press . The following options are available: • On: The system reroutes automatically based on traffic information. • Off (factory default): Disables the feature. 1 Traffic Rerouting Traffic Rerouting requires an AcuraLink Real-Time TrafficTM subscription. 2 AcuraLink® P. 298 Automatic traffic rerouting may not provide a detour route depending on circumstances.

System Setup Edit POI Search Radius Along Route H SETTINGS button u Navi Settings u Routing u Edit POI Search Radius Along Route Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint. 2 Adding Waypoints P. 161 You can specify a different search distance for freeways/highways and surface streets. 1. Rotate to select an item. Press . 2. Rotate to select a search distance. Press . The following items are available: • On Freeways (U.S.)/On highways (Canada): 1, 2, 5, or 10 miles (1.6, 3, 8, or 16 km) can be set. Factory default is 2 miles (3 km). • On Surface Streets: 1/2, 1, 2, or 5 miles (0.8, 1.6, 3, or 8 km) can be set. Factory default is 1/2 mile (0.8 km).

Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination. 1. Move and rotate to select New Area, or rotate to select an existing area to edit. 2. Rotate to select Name to label the area to avoid. Press . 3. Enter a name or title. Move to select OK. 4. Rotate to select Area to define the area to avoid. Press . The following options are available (after an area is set): • View Area: Displays the selected avoid area on the map. • Delete: Deletes the selected avoid area. 1 Avoided Area The maximum size of one side of an “avoid area” is approximately 1/2 mile (800 m). If your selected area contains a freeway/highway, you are asked “Do you want to avoid freeways (highways)?” Answering “No” allows you to use a route through an avoid area on a freeway/highway without any pop-up messages. You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing. You can enter up to 25 characters for the name.

specifying the area. Press . The following options are available: • Address: Specify the general area by entering an address. 2 Address P. 118 • Map Input: Specify the general area by map input. 2 Map Input P. 138 6. If you select Map Input, scroll the map to position the cursor over your desired start point, adjusting the map scale as necessary. Press to mark the start point. u To redo the area selection, press the BACK button. 7. Scroll the map to “draw” the area. Press to mark the end point. 8. Press to select OK. u The area you specify is displayed in the list of areas to avoid. 1 Avoided Area Avoid area can be set in the 1/20, 1/8, or 1/4 mile (80, 200, or 400 m) map scales. Cursor Avoid area

Choose various settings that determine the navigation system functionality during route guidance. Rotate to select an item. Press . The following items are available: • Guidance Mode: Sets whether to display only the map screen or a split map- guidance screen. 2 Guidance Mode P. 63 • Street Name Guidance (U.S. models): Sets whether to read out the street names during voice guidance. 2 Street Name Guidance P. 65 • Non-map Screens: Sets whether the guidance screen interrupts the screen display. 2 Non-map Screens P. 66 • Guidance Point: Sets whether to display the guidance information to the destination or the next waypoint. 2 Guidance Point P. 67 • Estimated Time: Sets whether to display the remaining time or arrival time to the guidance point. 2 Estimated Time P. 68

Select the display mode for the map and guidance screens. Rotate to select an option. Press . The following options are available: • Map (factory default): Displays only the map screen. When you approach a guidance point, the next guidance point appears. 1 Guidance Mode The guidance mode can also be selected from the map menu. 2 Map Menu P. 151 Press the NAV button to switch between the map, next guidance direction, and a list of guidance directions. Turn-by-Turn Directions The next guidance point appears on the multi- information display. 2 Turn-by-Turn Directions P. 10 You can turn this feature on or off using the multi- information display. See the Owner’s Manual for instructions. Map screen Near the next guidance point Next Maneuver screen Next guidance point

screen. When you approach a guidance point, the next guidance point appears. • Next Maneuver: Displays the map and next guidance point simultaneously on the map screen. Direction List screen Guidance direction list Near the next guidance point Next Maneuver screen Next guidance point Next Maneuver screen Next guidance point Near the next guidance point Next Maneuver screen

System Setup Street Name Guidance H SETTINGS button u Navi Settings u Guidance u Street Name Guidance The navigation system includes the street names during voice guidance (e.g., “Turn right on Main Street”). Rotate to select an option. Press . The following options are available: • On (factory default): Voice guidance includes the street names. • Off: Disables the feature. 1 Street Name Guidance This feature is only available when the system language is set to English. This feature may not be available in non-English speaking areas. This function is available on U.S. models only.

The navigation system temporarily interrupts the screen display to view the guidance screen as you approach a guidance point. Rotate to select an option. Press . The following options are available: • On: The guidance screen interrupts other mode screens (e.g., audio, phone, etc, except the rear view camera mode). • Off (factory default): Disables the feature.

Set the guidance point to display on the map screen. Rotate to select an option. Press . The following options are available: • Destination (factory default): Displays the remaining/arrival time and distance to the destination. • Next Point: Displays the remaining/arrival time and distance to the next waypoint.

Select the estimated time to display on the screen. Rotate to select an option. Press . The following options are available: • Arrival: Displays the arrival time to the destination or the next waypoint. • Remaining (factory default): Displays the remaining time to the destination or the next waypoint.

Select the landmark icons to display on the map, change the orientation of the map, display your current location, and learn the meaning of the icons, colors, and symbols displayed on the map. Rotate to select an item. Press . The following items are available: • Show Icon on Map: Selects the icons to display on the map. 2 Showing Icons on Map P. 71 • Color (Day): Selects the color of the map for the Day mode. 2 Color P. 73 • Color (Night): Selects the color of the map for the Night mode. 2 Color P. 73 • View: Selects the map orientation (North-up, Heading-up, or 3D map). 2 View (Map Orientation) P. 76 • 3D Angle Adjustment: Adjusts the viewing angle for the 3D map. 2 3D Angle Adjustment P. 77 • Straight Line Guide: Sets whether to display a straight guideline to the destination or waypoint. 2 Straight Line Guide P. 78

2 Current Location P. 79 • Map Legend: Displays an overview of the map features. 2 Map Legend P. 80 • Display Tracking: Sets whether to display the tracking dots on the map. 2 Display Tracking P. 84 • Delete Tracking: Deletes the tracking dots on the map. 2 Deleting Tracking Dots P. 85 • Correct Vehicle Position: Adjusts the position of the vehicle on the map. 2 Correct Vehicle Position P. 86 • System Device Information: Views database, software, device, and vehicle identification information. 2 System Device Information P. 312 • Map Data Update: Checks the map data update status when updating the map database. 2 Map Data Update P. 312

Continued System Setup Showing Icons on Map H SETTINGS button u Navi Settings u Map u Show Icon on Map Select the icons that are displayed on the map. 1. Rotate to select an item. Press . 2. Rotate to select an option. Press . u Repeat step 1 and 2 as necessary. 3. Move to select OK. Press . The following options are available: • All On: Displays the landmark icons. 2 Map Screen Legend P. 9 • Customize: Fine-tunes the icon display. 2 Fine-tuning the Icons P. 72 • Off: Hides the landmark icons. 1 Showing Icons on Map If you have PIN-protected your address book, enter your PIN when prompted. Move to select OK. PINs are optional. 2 PIN Numbers P. 47

System Setup Icons in some categories can be fine-tuned to display or hide. 1. Rotate to select the icons to display on the map. Press . u Pressing toggles the icon display on or off. u Repeat the procedure as necessary. 2. Move and rotate to select OK. Press . ■Fine-tuning the Icons

H SETTINGS button u Navi Settings u Map u Color (Day) Rotate to select a color for the Day mode. Press . H SETTINGS button u Navi Settings u Map u Color (Night) Rotate to select a color for the Night mode. Press . ■Color (Day) 1 Color (Day) The factory default is set to Beige. ■Color (Night) 1 Color (Night) The factory default is set to Blue.

(Display Mode) button to cycle through the display modes (Day to Night to Off). 1. Press the (Display Mode) button. u The Brightness bar is displayed for a few seconds. u Rotate to adjust the brightness. Press . 2. Press the (Display Mode) button again. u Repeat the procedure to switch the display modes. ■Switching Display Mode Manually 1 Switching Display Mode Manually A visual guide helps you see the difference between Day and Night modes. 2 Day or Night Mode P. 10 Illumination Priority Operation button 1 Selects Day, Night, or Off display mode. This button has the highest priority and overrides all other display control adjustments listed below. Remember: Once you press this button, you assume full manual control of the display mode until the power mode is set to VEHICLE OFF (LOCK). Sunlight sensor (see your Owner’s Manual for location) 2 If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode. Remember: If desired, use the (Display Mode) button to override this automatic choice.

Manual for location) 3 When headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness setting (beeps). Remember: Adjust the dash brightness back to mid-range to allow auto switching by sensing the headlights are on or off. Headlights (Auto/ On/Off) 4 When turned on, the display changes to Night display mode. The previous three controls listed above can “cancel” this function. Remember: Use the (Display Mode) button, or adjust the dash illumination to full brightness, to set the display to your desired choice. Screen color choice N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above. Illumination Priority Operation

System Setup View (Map Orientation) H SETTINGS button u Navi Settings u Map u View Select the map orientation. Rotate to select an option. Press . The following options are available: • North-up: Displays the map with North always pointing up. • Heading-up: Displays the map so that the direction you are traveling is always pointing up. • 3D Map: Displays the bird’s eye view map. 1 View (Map Orientation) The red arrow in the symbol always points North. Heading-up and 3D map view switch to the North-up view on 2 miles (3.2 km) or wider map scale. The bird’s eye view map switches to the Heading-up map while scrolling the map. The viewing angle for the bird’s eye view can be adjusted. 2 3D Angle Adjustment P. 77

System Setup 3D Angle Adjustment H SETTINGS button u Navi Settings u Map u 3D Angle Adjustment Adjust the viewing angle. Rotate to adjust the angle. Press .

System Setup Straight Line Guide H SETTINGS button u Navi Settings u Map u Straight Line Guide Set whether to display a straight guideline to the destination or waypoint. Rotate to select an option. Press . The following options are available: • On (factory default): Displays the straight guideline on the map. • Off: Disables the feature.

Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed. ■ To save your current location in the address book: 1. Press to select Address Book. u Move to scroll the map as necessary. 2. Edit the name, phone number, and category. 2 Address Book P. 39 3. Move and rotate to select OK. Press . 1 Current Location If you have PIN-protected your address book, enter your PIN when prompted. Press to select OK. PINs are optional. 2 PIN Numbers P. 47 The elevation is not displayed if the system is receiving insufficient GPS information. When elevation is displayed, it may differ with roadside elevation signs by ±100 ft (±30 m) or more. Saving your current location does not change or cancel your current route.

See an overview of the map lines, areas, routes, traffic information, and navigation icons. Move or to select an item. u The system displays the map legend. 1 Map Legend A visual guide helps you see the map legend. 2 Map Screen Legend P. 9 2 AcuraLink Real-Time TrafficTM P. 14

■Map Scale and Functions Function page Map Scale (top: mile, bottom: metric) 1/20 1/8 1/4 1/2 1 2 5 15 50 150 350 1000 80 200 400 800 1.6 3.2 8 24 80 240 560 1600 Icon display Landmark icon 9   Exit info. 9    One-way traffic 9  Waypoint “flag” 10             Traffic incident 14        Map orientation Heading-up 76      North-up 76             3D map 76      Others Tracking dots 148     Unverified road 9       Map features 9            Avoid areas 60    Traffic speed 14        1 Map Scale and Functions You can change between mile or km. 2 Unit Settings P. 33

Dealer icons which are always shown. ■ Landmark icon ■Map Icons and Functions Type Icon display control Icon selectable Icon searchable Honda/Acura dealer Always on Yes Yes Hospital Yes Yes Yes School Yes Yes Yes ATM Yes Yes Yes Gas station Yes Yes Yes Restaurants Yes Yes Yes Post office Yes Yes Yes Grocery store Yes Yes Yes Hotel/Lodging Yes Yes Yes Police station No icon No Yes Shopping, Tourist attraction, Bank No icon No Yes Parking garage Yes Yes Yes Parking lot Yes Yes Yes Freeway/Highway exit info. Yes Yes N/A 1 Map Icons and Functions Icon display control Icons that can be displayed or hidden using the Interface Dial or voice command. Icon selectable Icons that can be selected as a destination using the Interface Dial. Icon searchable Icons that can be searched using the Find Nearest voice command.

Type Icon display control Icon selectable Icon searchable Traffic incident Yes No N/A 1 Traffic icon When you use the Interface Dial to position the cursor (round red circle) over the traffic incident icon, you can view the summary of the incident. Press on the traffic incident icon to view a pop-up message describing the incident in detail.

The navigation system can be set to display white tracking dots (“breadcrumbs”) on the map screen. Rotate to select an option. Press . The following options are available: • On: The system displays the white tracking dots. 2 Tracking Dots P. 148 • Off (factory default): Disables the feature.

Rotate to select Yes. Press . ■Deleting Tracking Dots 1 Deleting Tracking Dots When you transfer the vehicle to a third party, delete the tracking dots.

System Setup Correct Vehicle Position H SETTINGS button u Navi Settings u Map u Correct Vehicle Position Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect. 1. Put the vehicle in Park. 2. Rotate to select Correct Vehicle Position. Press . 3. Scroll the map to position the cursor over at your correct position. Press . 4. Rotate to position the arrowhead in the correct direction the vehicle is facing. 5. Press to select OK. 1 Correct Vehicle Position An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use “dead reckoning” to determine your location and direction. Using this function to adjust vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location. If you continually have to adjust the vehicle position, you may have problems with the GPS reception or there may be database errors. 2 System Limitations P. 334

Changing the Screen Settings Adjusts the screen settings of the On Demand Multi-Use DisplayTM. 1. Select More. 2. Select Screen Settings. 3. Use , or other icons to adjust the setting. u Use the / icons to turn the page. u Select to go back to the previous screen. The followings are adjustable screen settings: • Sync Display Brightness: Selects whether the screen brightness synchronizes with the instrument panel brightness. • Brightness: Adjusts the screen's brightness. • Contrast: Adjusts the screen's contrast. • Black Level: Adjusts the screen's black level. • Display: Changes between the daytime or nighttime modes. • Beep: Turns on or off the beep that sounds every time you touch the screen. • Keyboard: Changes the on-screen keyboard from the alphabetical order to the qwerty type. • Fade Timer: Sets the screen black out timing.

■ How to customize Select your desired setting item by pressing the SETTINGS button, then rotating while the power mode is ON and the vehicle is at a complete stop. Press . 1 Customized Features When you customize settings, make sure that the vehicle is at a complete stop and shift to . To customize other features, rotate , move , , or , and press . 2 List of customizable options P. 95 SETTINGS Button Audio/Information Screen

Press the SETTINGS button. Guidance Volume Brightness Contrast Black Level Bluetooth Status Bluetooth Device List Edit pairing code Default Display System Settings Bluetooth Voice Reco Sync Display Brightness Clock Clock Adjustment Clock Format Clock Wallpaper Clock/Wallpaper Type Guidance Volume Sound/ Beep Verbal Reminder Song By Voice Song By Voice Phonetic Modification Phonebook Phonetic Modification Auto Time Zone Auto Daylight Clock Reset Voice Prompt

“Trip B” Reset Timing Language Selection Adjust Outside Temp. Display Forward Collision Warning Distance* ACC Forward Vehicle Detect Beep* Turn by Turn Display* Default Door Unlock Mode Keyless Access Light Flash Vehicle Settings Driver Assist System Setup Keyless Access Setup Keyless Access Beep Blind Spot Info* Driving Position Setup Lane Keeping Assist Suspend Beep* ACC Display Speed Unit* Remote Start System On/Off* Memory Position Link Meter Setup Keyless Access Beep Volume Factory Data Reset Background Color Header Clock Display Units Voice Command Tips* Others Language System Device Information * Not available on all models

Keyless Lock Answer Back Security Relock Timer Auto Door Lock Auto Door Unlock Door Setup Power Tailgate Setup Keyless Open Mode Power Open by Outer Handle Address Book Edit Go Home PIN Number Personal Information Previous Destination Download POI Category History Interior Light Dimming Time Headlight Auto Off Timer Auto Light Sensitivity Lighting Setup Navi Settings Default

Color (Day) Color (Night) Map View 3D Angle Adjustment Straight Line Guide Current Location This function is available on U.S. models only. *: Map Legend Display Tracking Delete Tracking Correct Vehicle Position System Device Information Map Data Update Unverified Routing Traffic Rerouting Edit POI Search Radius Along Route Routing Avoided Area Freeways Toll Road ETC Roads Route Preference Ferries U-turn Server Route Guidance Mode Street Name Guidance* Non-map Screens Guidance Guidance Point Estimated Time

HD Radio Mode*1 Audio Settings Cover Art*1 Bluetooth Device List*1 Recording from CD SportsFlashTM*1 Notification Beep Favorite Teams Play Song Top Recording Quality HDD Info Connect Bluetooth Audio Device Update Gracenote Album Info Delete All HDD Data Fixed Guideline Dynamic Guideline Cross Traffic Monitor Rear Camera Default Camera Settings May change depending on your currently selected source. *1:

Clock/Wallpaper Type Clock Adjustment Clock Default Other Info Settings Clock Format New AcuraLink Message AcuraLink Auto Time Zone Auto Daylight Default Enable Text/Email Select Account Text/Email New Text/Email Alert Add Bluetooth Device Disconnect Default Phone Connect Phone Edit Speed Dial Auto Transfer Auto Answer Ring Tone Use Contact Photo Default Phone Settings Automatic Phone Sync Bluetooth Device List Delete AcuraLink Message AcuraLink Subscription Status Clock Reset

*1: Default Setting Setup Group Customizable Features Description Selectable Settings System Settings Display Sync Display Brightness Selects whether the display brightness synchronizes with the instrument panel brightness. On*1/Off Brightness Changes the brightness of the audio/information screen. — Contrast Changes the contrast of the audio/information screen. — Black Level Changes the black level of the audio/information screen. — Sound/ Beep Guidance Volume Changes the volume of the audio speakers. — Verbal Reminder Turns the verbal reminders on and off. On*1/Off Bluetooth Bluetooth Status Turns the Bluetooth® on and off. On*1/Off Bluetooth Device List Pairs a new phone to HFL, edits and deletes a paired phone, and creates a security PIN. 2 Pairing a Phone P. 255 — Edit pairing code Changes a pairing code. 2 Changing the Pairing Code P. 258 Random/Fixed*1

Setup Group Customizable Features Description Selectable Settings System Settings Voice Reco Voice Prompt Turns the voice prompt on and off. On*1/Off Song By Voice Turns the Song By VoiceTM on and off. 2 Song By VoiceTM (SBV) P. 231 On*1/Off Song By Voice Phonetic Modification Modifies a voice command for music stored in the HDD or an iPod. 2 Phonetic Modification P. 233 — Phonebook Phonetic Modification Modifies a voice command for the phonebook. 2 Phonebook Phonetic Modification P. 268 — Guidance Volume Changes the volume of the voice prompt. —

Setup Group Customizable Features Description Selectable Settings System Settings Clock Clock/ Wallpaper Type Clock Changes the clock display type. Analog/Digital*1/Small Digital/Off Wallpaper ● Changes the wallpaper type. ● Imports an image file for a new wallpaper. ● Deletes an image file for a wallpaper. 2 Wallpaper Settings P. 30 Blank/Galaxy*1/ Metallic/Add New Clock Adjustment Adjusts Clock. 2 Clock Adjustment P. 28 — Clock Format Selects the digital clock display from 12H to 24H. 12H*1/24H Auto Time Zone Sets the navigation system to automatically adjust the clock when driving through different time zones. On*1/Off Auto Daylight Sets the navigation system to automatically adjust the clock (“spring ahead” or “fall back” by one hour) when a daylight saving time change occurs. On*1/Off Clock Reset Resets the settings of all items in the Clock group. —

Setup Group Customizable Features Description Selectable Settings System Settings Others Units Changes the distance unit on the navigation map screen. mile*1/km (U.S.) mile/km*1 (Canada) Language Changes the display language. English*1/Français/ Español Voice Command Tips* Alerts you when manual control of the system is disabled to prevent distraction while driving. Only voice commands are available. On*1/Off Background Color Changes the background color of the audio/ information screen and the On Demand Multi-Use DisplayTM. Blue*1/Amber/Red/ Green Header Clock Display Selects whether the clock display comes on. On*1/Off System Device Information Displays the system/device information. — Factory Data Reset Resets all the settings to their factory default. 2 Defaulting All the Settings P. 113 — Default Cancels/Resets all customized items in the System Settings group as default. Default/OK * Not available on all models