Amptweaker tightboost Operation & User’s Manual

• Tight Attack control lets YOU dial in the chunk • Boost, High, Mid-boost blends in Parked-Wah • 2 position Wah Frequency switch • Pre/Post selectable Effects Loop-tracks Bypass Switch! • Battery On/Off switch with red ʻDonʼt Forgetʼ indicator • LED lit knobs when using a DC ad ...

Mid-Wah–boosts the mid, and after about halfway it begins blending in a Wah type of Mid boost with 2 switch choices for wah position. High–EQ, set lower to get a more typical wah boosted tone Boost–a Master Boost, set it either for clean boost or use to balance to bypassed levels Output Jack– connect to ...

closed by a magnet, and can be opened just by pulling sideways EFX Loop Switch–selects Pre(before) or Post(after) position for the Loop. Usually Compressors sound best on Pre, while Delays & Reverbs sound better on Post LEDs–light up the knobs if an adapter is used Battery Switch– This switch turns off the batte ...

Amptweaker, LLC, P.O. Box 387, Batavia, OH 45103 handmade in USA www.amptweaker.com ©2010 Amptweaker, LLC Other Tips & Tricks: • Effects like compressors, treble boosters, octavers, or distortion tend to work best with the Effects Loop set to Pre. • Effects like delay, reverb, EQ, chorus, vibe/tremolo, and most ...