Arris C4 Operation & User’s Manual

File Specifications

Brand: Arris
Category: Control Unit
Model: C4 (Operation & User’s Manual), prtnEmJzvhwGc
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 3180 pages

Download PDF

Download Arris C4 Manual (3180 pages)

Read Online:

Read the Arris C4 Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 2646 show cable dsg tunnel * classifier Purpose This command displays the tunnel classifier information. Default Access Level 1 Command Syntax show cable dsg tunnel classifier [] Supplemental Information If the optional classifier is used, this command will display the tunnel classifier information Note: If the tunnel that a classifier is associated with does not contain provisioning, then the tunnel will be preceded by an asterisk ...

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 1659 configure interface cable-mac * ipv6 nd ra interval Purpose Sets the interval for the router advertisement beacon on the specified interface. Default Access Level 15 Command Syntax configure interface cable-mac ipv6 nd ra interval [] configure interface cable-mac ipv6 nd ra interval [] [] no Supplemental Information To return to the default interval, use the no option. Parameters The MAC identifi ...

Chapter 16: Dynamic Routing Protocols

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 507 State Sequence For a better understanding of this section, see RFC 2178 (http://www.rfc-base.org/txt/rfc-2178.txt), Section 10.1, Neighbor States, and Section 10.3, the Neighbor state machine, in order to understand state changes. When the first Hello packet is received from a new neighbor: 1. The neighbor is entered into the neighbor table in the init state. 2. When bidirectional communication is established, the neighbor state becomes two-way as ...

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 2211 configure packetcable dqos timer Purpose Sets the Packetcable DQoS (Dynamic Quality of Service) timer. Default Access Level 15 Command Syntax configure packetcable dqos timer [time] configure packetcable dqos timer [time] no Supplemental Information N/A Parameters Where timer name is "t0" or "t1" without the quotes. t0 - limits the amount of time between the reception of a Gate-Alloc message and a Gate-Set message for ...

Chapter 37: Service Class Names

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 998 Service Class Name Direction Scheduling Type Traffic Priority Maximum Traffic Rate in Mbps BronzeDown downstrea m 2 This table compares typical throughputs of sample service classes. Each advertised subscriber service should have a corresponding SCN. These SCNs are called on by the configuration files used to register CMs and by the C4/c CMTS to build SFs for subscribers. Additional Service Flows Additional service flows could be added using the followi ...

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 2577 delete Purpose Removes an existing file. Default Access Level 15 Command Syntax delete Supplemental Information N/A Parameters Path to the file you want deleted ...

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 2165 configure l2vpn cm capability Purpose Permits the legacy CMs to register with L2VPN TLV encodings. Default Access Level 15 Command Syntax configure l2vpn cm capability {esafe-ident|dut-filter} {required|optional} configure l2vpn cm capability {esafe-ident|dut-filter} {required|optional} no Supplemental Information Note: If neither capability is identified, then both esafe-ident and dut-filter will be set. The default for each capability is requir ...

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide © 2016 ARRIS Enterprises LLC. All Rights Reserved. 2961 show lacp * summary Purpose Displays a summary of the Link Aggregation Control Protocol interface. Default Access Level 1 Command Syntax show lacp summary Supplemental Information N/A Parameters LACP ID ...

Arris C4 user guide recommended for: AS24, A5100-A, 319 Series, AHBP06M1-5A, E2MV107A6.

⚠️ Download Safety

The Control Unit Operation & user’s manual (3180 pages) is completely safe to download (last scan date: 07/02/2026).

Related PDF Instructions for Arris C4:

Control Unit Equipment: Frequently Requested

Have some Questions about Arris C4 Device?

Get valuable and actionable advices from other Arris C4 device users. Describe your problem or question, regarding the using of C4, in as much detail as possible, and other users will be able to answer you.