Caliber rmd 046 Manual
Text of the manual
RMD 046 installation
Page 1
INSTALLATION METHOD
OPERATING THE UIIT
METAL MOUNTING SLEEVE
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
METAL
SUPPORT STARP
DASHBOARD
For optimum anti-skip capability of the unit,
please ensure the metal support strap is
bolted firmly to the car chassis.
SOFT PLASTIC TRIM RING
To remove th
RMD 046 operating
Page 2
h
1.- RESET BUTTON
The unit must be reset under the following conditions:
A) Prior to using this unit for the first time after installation.
B) If the unit fails to operate properly, press the RESET with a pen tip or other pointed instrument.
2. - SEL & VOL CONTROL BUTTON
A) Press the SEL repeatedly to select VOLUME - BASS - TREBLE -
RMD 046 wire connections
Page 3
Specification
GENERAL
FM SECTION
AM SECTION
RCA LINE OUT
MMC/SD or USB PLAYBACK
Supply VoltageDC
12V Negative Ground
Current Consumption
Max. 7A
Power Output
7Watts x 4 (at DC 14.4V)
Number of Channels
2 STEREO channels
Unit Dimensions
178(W)x108(D)x50(H)mm
Frequency Range
87.5MHz 108MHz
Effective Sensitivity
3uV.
Signal to no
