Comelit 2708W Technical Manual
Read Online
Read the Comelit 2708W Technical Manual online using the built-in PDF viewer.
Text of the manual
Table of contents
Warning ............................................................................................ 2
Description ....................................................................................... 3
Technical characteristics ................................................................ 4
Installation ........................................................................................ 5
Connections ..................................................................................... 6
Connection to the door entry riser and the floor door call button ......6
Programming ................................................................................... 6
Dip switch programming table ....................................................... 7
EXAMPLE: dip switch setting for code 200 ...........................................7
Operating distances ........................................................................ 8
Maximum system expansion ...................................................................8
Wiring diagram ................................................................................ 9
Door-entry phone system for one entrance with audio external unit.
Switching on/voltage check with system in standby. ...........................9
Intended use
This Comelit product was designed for use in the creation of audio and video communication systems in residential,
commercial or industrial settings and in public buildings or buildings used by the public.
Installation
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with
careful observation of the indications provided in the Manuals / Instruction sheets supplied with those products.
Wires
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system
manual.
We advise against running the system wires through the same duct as the power cables (230V or higher).
Safe usage
To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets
• make sure the system created using Comelit products has not been tampered with / damaged.
Maintenance
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance
with the indications provided in the Manuals / Instruction sheets.
Any repair work must be carried out
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for systems, by qualified technical personnel.
Disclaimer
Comelit Group S.p.A. does not assume any responsibility for
• any usage other than the intended use
• non-observance of the indications and warnings contained in this Manual / Instruction sheet.
Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this Manual / Instruction
sheet at any time and without prior notice
Art. 2708W is a door-entry phone complete with 1 key button, 1 P1 button and a 3-position ringtone / Privacy service selector,
which can be used in SB1 systems.
Dimensions 105×190×28 mm.
1. Loudspeaker.
2 Audio hook.
Do not press and hold the audio hook
while the handset is lifted.
3. 3-position ringtone/Privacy service selector:
High position: Maximum ringtone volume.
Middle position: Medium ringtone volume.
Low position: Privacy function activation (privacy
service means exclusion of the call ringtone from the
external unit and switchboard).
4 Red indicator - Privacy enabled.
5. P1 button for switchboard call / generic actuator.
6. Key button.
7. Terminal block M1:
CFP CFP
floor door call input
LL
bus line connection
8. Dip switch for setting user code (See “Dip switch
programming table”).
9. 3-position selector for Call tone/Privacy service.
10. JP1 jumper for selecting the Generic actuator/
Switchboard call function of button P1.
A Generic Actuator
C Switchboard
11. Handset connector.
1.
5.
4.
6.
M1
S1
SW1
JP1
2.
CFP
CFP
L
L
3.
11.
7.
8.
9.
10.
SimplebusTop ( S1 )
Audio system
Yes
Audio/video system
No
Wall-mounted
Yes
Desk base-mounted
Yes
Hands-free function
-
Induction loop function
-
Product color
White
Total buttons
2
LED signaling
No
FUNCTIONS
Actuator control function
Yes
Switchboard call function
Yes
Panic call
-
General intercom call
-
Selective intercom call
-
Privacy function
Yes
Doctor
-
Floor door call function
Yes
Electronic bell
Yes
Customisable ringtone
-
SETTINGS
Loudspeaker volume control
Yes
Ringtone volume control
Yes
TECHNICAL SPECIFICATIONS
Supply voltage
20 ÷ 28 Vdc
Power consumption stand-by (mA)
0,710 ÷ 0, 715 mA
In called absorption (mA)
20 ÷ 23 mA
In communication absorption (mA)
20 ÷ 22 mA
Microphone
Ø 9,6 x 6,9 mm
Speaker
Ø 0,50 mm ; Max Imput Power 0,5W
IP Rating
30
Operating temperature (°C)
-5/40
Relative humidity for operation: between 25 % and 75 %
Dimensions (L x H x D) mm
105 x 190 x 28
Product weight (g)
0,257 Kg
Clamps
L,L,CFP,CFP
2
1
3
3
2
1
2
3
3
2
1
3D
3C
3B
S1
SW1
JP1
CFP
CFP
L
L
S1
SW1
JP1
CFP
CFP
L
L
max 7cm
1
1
CLACK!
2
CLACK!
1
1
1
1
2
6
5
4
2
2
1
cm 160
cm 130
1
2
2
3
3A
2
1
mm 190
mm 105
7
5
Installation
Connection to the door entry riser and the floor door call button
L
L
C
F
P
C
F
P
1622
2708W
Where multiple door-entry phones or monitor backplates have the same user code, connect the CFP button on one
only; all the devices will ring simultaneously.
20 m MAX - Use shielded cable for the connection and do not route the cables in the vicinity of heavy inductive loads
or power supply cables (230V/400V).
Programming
• Each door-entry phone in the system is identified by means of its own code. This code must be set using the Dip switch on
the phone card.
• The user code must be set according to the corresponding information provided in the programming table (see: “Dip
switch programming table”).
• Coding can take place at any time, even without a power supply.
Dip switch programming table
EXAMPLE: dip switch setting for code 200
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
Code
Dip switch
ON
1
1
31
1,2,3,4,5
61
1,3,4,5,6
91
1,2,4,5,7
121
1,4,5,6,7
151
1,2,3,5,8
181
1,3,5,6,8
211
1,2,5,7,8
2
2
32
6
62
2,3,4,5,6
92
3,4,5,7
122
2,4,5,6,7
152
4,5,8
182
2,3,5,6,8
212
3,5,7,8
3
1,2
33
1,6
63
1,2,3,4,5,6
93
1,3,4,5,7
123
1,2,4,5,6,7
153
1,4,5,8
183
1,2,3,5,6,8
213
1,3,5,7,8
4
3
34
2,6
64
7
94
2,3,4,5,7
124
3,4,5,6,7
154
2,4,5,8
184
4,5,6,8
214
2,3,5,7,8
5
1,3
35
1,2,6
65
1,7
95
1,2,3,4,5,7
125
1,3,4,5,6,7
155
1,2,4,5,8
185
1,4,5,6,8
215
1,2,3,5,7,8
6
2,3
36
3,6
66
2,7
96
6,7
126
2,3,4,5,6,7
156
3,4,5,8
186
2,4,5,6,8
216
4,5,7,8
7
1,2,3
37
1,3,6
67
1,2,7
97
1,6,7
127
1,2,3,4,5,6,7
157
1,3,4,5,8
187
1,2,4,5,6,8
217
1,4,5,7,8
8
4
38
2,3,6
68
3,7
98
2,6,7
128
8
158
2,3,4,5,8
188
3,4,5,6,8
218
2,4,5,7,8
9
1,4
39
1,2,3,6
69
1,3,7
99
1,2,6,7
129
1,8
159
1,2,3,4,5,8
189
1,3,4,5,6,8
219
1,2,4,5,7,8
10
2,4
40
4,6
70
2,3,7
100
3,6,7
130
2,8
160
6,8
190
2,3,4,5,6,8
220
3,4,5,7,8
11
1,2,4
41
1,4,6
71
1,2,3,7
101
1,3,6,7
131
1,2,8
161
1,6,8
191
1,2,3,4,5,6,8
221
1,3,4,5,7,8
12
3,4
42
2,4,6
72
4,7
102
2,3,6,7
132
3,8
162
2,6,8
192
7,8
222
2,3,4,5,7,8
13
1,3,4
43
1,2,4,6
73
1,4,7
103
1,2,3,6,7
133
1,3,8
163
1,2,6,8
193
1,7,8
223
1,2,3,4,5,7,8
14
2,3,4
44
3,4,6
74
2,4,7
104
4,6,7
134
2,3,8
164
3,6,8
194
2,7,8
224
6,7,8
15
1,2,3,4
45
1,3,4,6
75
1,2,4,7
105
1,4,6,7
135
1,2,3,8
165
1,3,6,8
195
1,2,7,8
225
1,6,7,8
16
5
46
2,3,4,6
76
3,4,7
106
2,4,6,7
136
4,8
166
2,3,6,8
196
3,7,8
226
2,6,7,8
17
1,5
47
1,2,3,4,6
77
1,3,4,7
107
1,2,4,6,7
137
1,4,8
167
1,2,3,6,8
197
1,3,7,8
227
1,2,6,7,8
18
2,5
48
5,6
78
2,3,4,7
108
3,4,6,7
138
2,4,8
168
4,6,8
198
2,3,7,8
228
3,6,7,8
19
1,2,5
49
1,5,6
79
1,2,3,4,7
109
1,3,4,6,7
139
1,2,4,8
169
1,4,6,8
199
1,2,3,7,8
229
1,3,6,7,8
20
3,5
50
2,5,6
80
5,7
110
2,3,4,6,7
140
3,4,8
170
2,4,6,8
200
4,7,8
230
2,3,6,7,8
21
1,3,5
51
1,2,5,6
81
1,5,7
111
1,2,3,4,6,7
141
1,3,4,8
171
1,2,4,6,8
201
1,4,7,8
231
1,2,3,6,7,8
22
2,3,5
52
3,5,6
82
2,5,7
112
5,67
142
2,3,4,8
172
3,4,6,8
202
2,4,7,8
232
4,6,7,8
23
1,2,3,5
53
1,3,5,6
83
1,2,5,7
113
1,5,6,7
143
1,2,3,4,8
173
1,3,4,6,8
203
1,2,4,7,8
233
1,4,6,7,8
24
4,5
54
2,3,5,6
84
3,5,7
114
2,5,6,7
144
5,8
174
2,3,4,6,8
204
3,4,7,8
234
2,4,6,7,8
25
1,4,5
55
1,2,3,5,6
85
1,3,5,7
115
1,2,5,6,7
145
1,5,8
175
1,2,3,4,6,8
205
1,3,4,7,8
235
1,2,4,6,7,8
26
2,4,5
56
4,5,6
86
2,3,5,7
116
3,5,6,7
146
2,5,8
176
5,6,8
206
2,3,4,7,8
236
3,4,6,7,8
27
1,2,4,5
57
1,4,5,6
87
1,2,3,5,7
117
1,3,5,6,7
147
1,2,5,8
177
1,5,6,8
207
1,2,3,4,7,8
237
1,3,4,6,7,8
28
3,4,5
58
2,4,5,6
88
4,5,7
118
2,3,5,6,7
148
3,5,8
178
2,5,6,8
208
5,7,8
238
2,3,4,6,7,8
29
1,3,4,5
59
1,2,4,5,6
89
1,4,5,7
119
1,2,3,5,6,7
149
1,3,5,8
179
1,2,5,6,8
209
1,5,7,8
239
1,2,3,4,6,7,8
30
2,3,4,5
60
3,4,5,6
90
2,4,5,7
120
4,5,6,7
150
2,3,5,8
180
3,5,6,8
210
2,5,7,8
240
5,6,7,8
1 mm² (Ø 1,2 mm AWG 17)
50 m
(165 feet)
500 m
(1625 feet)
0,28 mm² (Ø 0,6 mm AWG 23)
5 m
(15 feet)
300 m
(990 feet)
0,5 mm² (Ø 0,8 mm AWG 20)
25 m
(85 feet)
400 m
(1315 feet)
1,5 mm² (Ø 1,4 mm AWG 15)
75 m
(245 feet)
600 m
(1980 feet)
2,5 mm² (Ø 1,8 mm AWG 13)
100 m
(330 feet)
800 m
(2600 feet)
Maximum system expansion
*with 100 internal units the audio sound level is 74 dB(A), with 75 internal units the audio sound level is greater, at 77 dB(A).
• Maximum number of internal units that can be powered from art. 1595: 100*
• Max. number of internal units with the same user code: 4
Local lock-release button.
SBC/01M
Door-entry phone system for one entrance with audio external unit. Switching on/voltage
check with system in standby.
w w w . c o m e l i t g r o u p . c o m
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
C E R T I F I E D M A N A G E M E N T S Y S T E M S
1ª edizione 12/2016
cod. 2G40001515
