Dors 800 Operation & User’s Manual

Figure 35 1.2 Keys «I» or «II» are used for the start of count in the manual start mode. To start, press the button of the active user. 2 Key/indicator of the counting mode The sorter is counted banknotes in three modes: «COUNT», «MIX», «DEN». A mode is selected by a repetitive pressing of the mode key. At the same time this key is the indicator of the selected operation mode. 2.1 «COUNT» is a piece counting mode. The notes are counted without recognition of their denominations and counterfeit detection, the display is shown the number of the count ...

stacker is equal to the stacker capacity. Remove the banknotes from the stacker. The machine resumes counting automatically (in the automatic start mode) or after key I (II) is pressed (in the manual start mode). Messages Remove notes from reject pocket The number of notes in the reject pocket is equal to its capacity. Remove the banknotes from the reject pocket. Add banknotes The hopper is empty while the number of notes in the stacker is less than the required batch size (in the AUTOMATIC START mode). Add banknotes to the ...

3.1 By pressing the CURRENCY key, the CURRENCY submenu is appeared (see Fig. 41), and a user can choose the currency to be counted and denomination. (The set of supported currencies is depended on the software version.) Currency selection is available only for modes «MIX» and «DEN», denomination selection is available only for mode «DEN». By default, the automatic mode of currency recognition is activated; it DORS 800 BANKNOTE SORTER DORS 800 BANKNOTE SORTER 2.3 «DEN» is the counting mode for the certain denomination of banknotes with their ...

Figure 35 1.2 Keys «I» or «II» are used for the start of count in the manual start mode. To start, press the button of the active user. 2 Key/indicator of the counting mode The sorter is counted banknotes in three modes: «COUNT», «MIX», «DEN». A mode is selected by a repetitive pressing of the mode key. At the same time this key is the indicator of the selected operation mode. 2.1 «COUNT» is a piece counting mode. The notes are counted without recognition of their denominations and counterfeit detection, the display is shown the number of the count ...

8 UV reflection sensors 9 Magnetic sensors 7 8 5 9 Figure 7 10 Counting sensors 11 Diverter 10 11 Figure 6 Preparing for Operation 1 Make sure that the safety precautions mentioned in the relevant section of the manual are kept. 2 Install the banknote guide (Fig. 1, item 2) included in the delivery set: 2.1 Take one banknote guide (Fig. 1, item 2) and match the tabs of the guide (see Fig. 8) with the slots of the banknote guide holder (see Fig. 9). 2.2 Push the guide into the holder (see Fig. 10). 2.3 To fasten the guide on the holder, move it down up to the stop ...

USER SELECTION) 1.1 The sorter is able to save two various profiles with the unique settings. You can switch between them by pressing keys «I» and «II» (see Fig. 3). The profiles may be used by one user or by two users (it's the operation mode «Two tellers»). According to the tasks to be solved and personal preferences, each user has possibility to choose any setting and any counting/sorting mode. WIDE VISUAL MODE DORS 800 BANKNOTE SORTER DORS 800 BANKNOTE SORTER Green highlight Figure 33 In the Wide Visual Mode, the h ...

USER SELECTION) 1.1 The sorter is able to save two various profiles with the unique settings. You can switch between them by pressing keys «I» and «II» (see Fig. 3). The profiles may be used by one user or by two users (it's the operation mode «Two tellers»). According to the tasks to be solved and personal preferences, each user has possibility to choose any setting and any counting/sorting mode. WIDE VISUAL MODE DORS 800 BANKNOTE SORTER DORS 800 BANKNOTE SORTER Green highlight Figure 33 In the Wide Visual Mode, the h ...

updates outside your supplier's workshop. Figure 57 DORS 800 BANKNOTE SORTER DORS 800 BANKNOTE SORTER 5 Wait till the «Updates download successfully completed!» message appears in the program window, the sorter is started its self-testing (see article 2 of subsection «Operation»). Then the application requests the update server again and shows the message «not required» in the UPDATE column. (see Fig. 58). Figure 58 6 Close the application «BVS Update». 7 Wait till self-testing is over, and switch off the ...