EMX BG-VK1 Operating Instructions Manual

MODEL BG MODEL BG MODEL BG MODEL BG----VK1 VK1 VK1 VK1 Operating Instructions

2 Document no. 10100304 CAUTIONS AND WARNINGS CAUTIONS AND WARNINGS CAUTIONS AND WARNINGS CAUTIONS AND WARNINGS IMPORTANT: IMPORTANT: IMPORTANT: IMPORTANT: If the equipment is used in a manner not specified in this manual, the protection provided b If the equipment is used in a manner not specified in this manual, the protection provided b If the equipment is used in a manner not specified in this manual, the protection provided b If the equipment is used in a manner not specified in this manual, the protection provided by the y the y the y the equipment may be impaired. equipment may be impaired. equipment may be impaired. equipment may be impaired. This product is an accessory or part of a system. Always read and follow the manufacturer’s This product is an accessory or part of a system. Always read and follow the manufacturer’s This product is an accessory or part of a system. Always read and follow the manufacturer’s This product is an accessory or part of a system. Always read and follow the manufacturer’s instructions for the equipment before connecting this product. Comply with all applicable codes instructions for the equipment before connecting this product. Comply with all applicable codes instructions for the equipment before connecting this product. Comply with all applicable codes instructions for the equipment before connecting this product. Comply with all applicable codes and safety regulations. Failure and safety regulations. Failure and safety regulations. Failure and safety regulations. Failure to do so may result in damage, injury or death. to do so may result in damage, injury or death. to do so may result in damage, injury or death. to do so may result in damage, injury or death. Do not operate this product in flammable or explosive environments. Do not operate this product in flammable or explosive environments. Do not operate this product in flammable or explosive environments. Do not operate this product in flammable or explosive environments. Disconnect power before making any electrical connections. Disconnect power before making any electrical connections. Disconnect power before making any electrical connections. Disconnect power before making any electrical connections. The recommended power supply should be UL or VDE approved with overload prote The recommended power supply should be UL or VDE approved with overload prote The recommended power supply should be UL or VDE approved with overload prote The recommended power supply should be UL or VDE approved with overload protection. ction. ction. ction. BlueGuard is not designed for use with operators or residential garage door openers that utilize a BlueGuard is not designed for use with operators or residential garage door openers that utilize a BlueGuard is not designed for use with operators or residential garage door openers that utilize a BlueGuard is not designed for use with operators or residential garage door openers that utilize a single button control (push to open, push to stop and push to close). single button control (push to open, push to stop and push to close). single button control (push to open, push to stop and push to close). single button control (push to open, push to stop and push to close). Do not place the magnet near any sensitive object such as credit cards, access Do not place the magnet near any sensitive object such as credit cards, access Do not place the magnet near any sensitive object such as credit cards, access Do not place the magnet near any sensitive object such as credit cards, access cards or data cards or data cards or data cards or data storage devices. storage devices. storage devices. storage devices. Some cell phones do not allow simultaneous Bluetooth Some cell phones do not allow simultaneous Bluetooth Some cell phones do not allow simultaneous Bluetooth Some cell phones do not allow simultaneous Bluetooth connections, therefore, may not respond to connections, therefore, may not respond to connections, therefore, may not respond to connections, therefore, may not respond to BlueGuard when the phone is paired (connected) to a wireless headset or other Bluetooth BlueGuard when the phone is paired (connected) to a wireless headset or other Bluetooth BlueGuard when the phone is paired (connected) to a wireless headset or other Bluetooth BlueGuard when the phone is paired (connected) to a wireless headset or other Bluetooth®®®® device. device. device. device. Refer to your cell phone’s ow Refer to your cell phone’s ow Refer to your cell phone’s ow Refer to your cell phone’s owner’s manual for further information. ner’s manual for further information. ner’s manual for further information. ner’s manual for further information. PRODUCT OVERVIEW PRODUCT OVERVIEW PRODUCT OVERVIEW PRODUCT OVERVIEW BlueGuard is a Bluetooth enabled access control device providing an output in the form of relay contacts that activate when a Bluetooth enabled cell phone finds BlueGuard and the correct PIN is entered. Authorization is confirmed by verification of the cell phones unique Bluetooth ID. The BlueGuard contacts may be connected to a gate operator or other external device to allow activation. BlueGuard’s user interface features a secure, magnetically activated switch to place the unit in the set-up mode. During set-up BlueGuard reads Bluetooth devices that are within range and allows the user to select bonding using the cell phone’s keypad by entering a unique PIN. The PIN prevents unauthorized users from accessing the control functions or bonding with the unit. BlueGuard installation, set-up and operation are described in the following sections. QUICK START GUIDE QUICK START GUIDE QUICK START GUIDE QUICK START GUIDE 1. Connect a DVM or buzzer to the brown and green wires to check continuity, a DVM should measure “open”. 2. Connect the BlueGuard VK to power 12-30VDC or 24VAC (attach the red + and black - wires). 3. The Blue LED will be ON for about 10 seconds. 4. Take your Bluetooth enabled phone and search for discoverable devices until your phone discovers the BlueGuard. 5. Connect to BlueGuard and upon request enter the default PIN 123321. 6. The output Relay is actuated for about 5 seconds, the DVM will indicate contact closure “short” or the buzzer will buzz. 7. You are now ready to personalize the PIN code and connect the ARM input if necessary. Refer to the appropriate sections in the Operating Instructions. Bluetooth® is a registered trademark of Bluetooth SIG Inc. BlueGuard® is a trademark of EMX Industries, Inc.

3 Document no. 10100304 Specif Specif Specif Specifications ications ications ications RADIO BLUETOOTH, Class 2 (up to 10 meter, 33ft. range) INDICATORS Blue status LED CONTROLS Secure, magnetic switch requires magnet placement in correct location to activate programming mode for changing the PIN (user programmable 4-6 digit PIN) USER CAPACITY Unlimited users (requires correct PIN entry) INPUTS ARM input, allows activation only when activated (unconnected if not used) Connect ARM to ARM common to disarm BlueGuard output Disconnect ARM to ARM common to arm BlueGuard output OUTPUT 5 second pulse Form C relay contacts (normally open, common, normally closed) Contacts: 2A@ 30VDC, 0.5A @ 120VAC CONNECTIONS Power (2 wires) Relay normally closed contact Relay common Relay normally open contact ARM input ARM common POWER 12…30 VDC and 24 VAC @ 40mA (reverse polarity protected) OPERATING TEMPERATURE -40°C…82°C (-40°F…180°F) 0…95% relative humidity HOUSING Sealed, PVC DIMENSIONS (dia. x height) 1” x 7.5” (25mm x 190mm) WEIGHT 0.15lbs (68g) INSTALLATION INSTALLATION INSTALLATION INSTALLATION The BlueGuard housing is durable PVC, watertight and designed for outdoor or indoor use. Bluetooth devices have a specified range of 33ft. (10 meters) in open air. This range may be reduced by obstructions. It is recommended that BlueGuard be mounted in a secure location that is not easily accessed to prevent tampering or damage. Outdoor Location Outdoor Location Outdoor Location Outdoor Location The BlueGuard housing provides a ½” NPT fitting to allow mounting directly onto the top of a gate operator and a ½” elbow is supplied for side mounting. BlueGuard must be mounted in the vertical orientation for optimum range. 1. Chose a location for mounting and verify that there are no obstructions in the operator. 2. Make a clearance hole and mount the BlueGuard using the locknuts provided. 3. The joint must be sealed to prevent water from entering the operator. A good quality, outdoor silicone sealant may be used. Indoor Location Indoor Location Indoor Location Indoor Location Connections Connections Connections Connections The 4ft. cable provides connections to the operator for power, output and control signals. If additional length is needed, use the remote gang box accessory available separately from EMX. POWER Verify that the available power supply is within BlueGuard’s supply requirements. OUTPUT CONTACTS BlueGuard’s output consists of a set of form C contacts. The common contact is common to both the normally open (NO) and normally closed (NC) contacts. The NO contact will close when an authorized phone comes into range while the NC contact will open. ARM INPUT The ARM input may be used to disable BlueGuard operation during certain conditions by connecting the ARM input to a timer, occupancy sensor or any type of a switching device.

4 Document no. 10100304 In gate applications, the ARM input may be used to disable BlueGuard until a vehicle is detected. For example, BlueGuard can be used with an Outside Safety Loop to qualify BlueGuard’s output with the presence of a vehicle. When used, it is connected to a spare set of output contacts from a vehicle loop detector (Loop Detector Relay 2). Connect the ARM input to the vehicle detector relay 2 NC contact and the ARM common to the vehicle detector relay 2 COM contact. Use EMX DTEK or MVP DTEK in this application. When this feature is not used leave the ARM input unconnected. For a more detailed description of the ARM function, refer to the ARM input section of this manual. Refer to the wiring chart for color code information. USING BLUEGUARD VIRTUAL KEYPAD USING BLUEGUARD VIRTUAL KEYPAD USING BLUEGUARD VIRTUAL KEYPAD USING BLUEGUARD VIRTUAL KEYPAD Power up Power up Power up Power up Apply power to the BlueGuard. The blue LED will illuminate for 10 seconds on power up. Connecting your cell phone to activate BlueGuard Connecting your cell phone to activate BlueGuard Connecting your cell phone to activate BlueGuard Connecting your cell phone to activate BlueGuard BlueGuard is always in discovery, that is, it can be found by any Bluetooth enabled phone. The default PIN is 123321. To activate BlueGuard, select “find devices” “add a device” or similar function in your phone. Your phone will find BlueGuard and generally ask to connect, select yes, and when the PIN is requested enter the appropriate PIN. BlueGuard will activate its output for 5 seconds. Entering your unique PIN Entering your unique PIN Entering your unique PIN Entering your unique PIN The PIN is a 4-6 digit number. The PIN may be entered by editing the phone’s name in the Bluetooth menu (on the phone). For iPhone® users, the friendly name can be edited only by using the iTunes® program. Use the iTunes® to enter your custom 4-6 digit code into your iPhone® friendly name field. The PIN is the last 4-6 digits entered into the phone name. For example, if the name is shown “ Brand X” then edit the name to read “Brand X 134566” where 134566 is the desired PIN”. If your phone has a numeric model in its friendly name, for example “BrandX 9301” edit the name to “BrandX 9301A1234” where 1234 is the new PIN and “A” separates the new PIN from the model. IPhone® and iTunes® are registered trademarks of Apple Inc. Record your PIN Record your PIN Record your PIN Record your PIN 1. Place the magnet against the BlueGuard housing and continue to hold it there. The blue LED will turn on for 10 seconds followed by a medium flashing for an additional 20 seconds. Remove the magnet during the medium flashing and the LED will flash faster for 3 minutes. During this time BlueGuard is in the Discovery mode and will be found by your cell phone. 2. Select the Bluetooth menu in the cell phone and verify that the Bluetooth link is ON. 3. Select the Bluetooth menu in the cell phone and select the FIND DEVICES, LOOK FOR DEVICES or similar function. The phone will scan for Bluetooth devices and upon completion return a list of devices that have been found. 4. Select the “BlueGuard by EMX”, the phone may ask to bond with this device, select YES. 5. The phone will ask for the PIN. If this is the first phone to be bonded then enter the default PIN, 123321. All subsequent connections will require entry of the new PIN if one has been entered.

5 Document no. 10100304 Restoring the original PIN Restoring the original PIN Restoring the original PIN Restoring the original PIN To erase the unique PIN and restore the original PIN (123321): 1. Place the magnet against the BlueGuard housing and continue to hold it there. The blue LED will turn on for 10 seconds followed by a medium flashing for an additional 20 seconds. Continue to hold the magnet against the housing. 2. The blue LED will begin to flash fast, continue to hold the magnet against the housing for an additional 10 seconds and BlueGuard will restore the PIN to 123321. ARM input (optional) ARM input (optional) ARM input (optional) ARM input (optional) The ARM input provides a means to prevent the BlueGuard from activating its output. This feature may be useful when used with a vehicle loop detector, allowing the BlueGuard to activate its output only when a vehicle is present. Alternatively, a switch may be used to disable BlueGuard. When the ARM input is connected to the ARM common the BlueGuard is disabled (connect to the loop detector relay N.O and common contacts). Leave this connection disconnected if not used. Bluetooth Range Bluetooth Range Bluetooth Range Bluetooth Range The range of Bluetooth Class 2 devices is approximately 10 meters (33ft.). To establish a connection the phone must be within 10 meters, however, a connection may not be dropped (disconnected) until the radio signal is significantly weaker which may exceed 25 meters (82ft.). This is a characteristic of Bluetooth communications. CONTROLS and INDICATORS CONTROLS and INDICATORS CONTROLS and INDICATORS CONTROLS and INDICATORS BLUE LED INDICATOR MAGNETIC SWITCH LOCATION CONNECTIONS CONNECTIONS CONNECTIONS CONNECTIONS Wire color Wire color Wire color Wire color Description Description Description Description RED Power + (12VDC…24VDC, 24VAC) BLACK Power - (12VDC…24VDC, 24VAC) BROWN Pulse/Presence relay Normally Open (NO) GREEN Pulse/Presence relay Common (COM) WHITE Pulse/Presence relay Normally Closed (NC) ORANGE ARM input (optional, may be left unconnected) YELLOW ARM common BLUE Not used Note: Relay states (NO, NC) are shown in standby (i.e. not in detect)

6 Document no. 10100304 TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING BlueGuard does not recognize respond to phone • Verify that BlueGuard is operational by placing the magnet momentarily against the housing near the magnetic switch. Verify the blue LED turns on. • Verify that the cell phone has Bluetooth turned on. • Check another phone to see if it works Blue LED does not turn on (when magnet is in place) • Verify power connections and voltages are within specified values. See specification table. • Verify magnet is properly positioned (see Controls and Indicators section) BlueGuard does not respond when a headset is linked to the phone • Some cell phones do not allow simultaneous Bluetooth connections, therefore, may not respond to BlueGuard when the phone is paired (connected) to a wireless headset or other Bluetooth device. Refer to your cell phone’s owner’s manual for further information. ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION BG BG BG BG----VK1 VK1 VK1 VK1 BlueGu BlueGu BlueGu BlueGuard Virtual Keypad, includes elbow fitting, 2 locknuts and magnet ard Virtual Keypad, includes elbow fitting, 2 locknuts and magnet ard Virtual Keypad, includes elbow fitting, 2 locknuts and magnet ard Virtual Keypad, includes elbow fitting, 2 locknuts and magnet ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES UUUU----BOX BOX BOX BOX Remote gang box and cover Remote gang box and cover Remote gang box and cover Remote gang box and cover BG BG BG BG----AAAA----KIT KIT KIT KIT Accessory kit, includes elbow fitting and magnet Accessory kit, includes elbow fitting and magnet Accessory kit, includes elbow fitting and magnet Accessory kit, includes elbow fitting and magnet

7 Document no. 10100304 REGULATORY COMPLIANCE REGULATORY COMPLIANCE REGULATORY COMPLIANCE REGULATORY COMPLIANCE USA USA USA USA----Federal Communications Com Federal Communications Com Federal Communications Com Federal Communications Commission (FCC) mission (FCC) mission (FCC) mission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Caution: Exposure to Radio Frequency Radiation. Caution: Exposure to Radio Frequency Radiation. Caution: Exposure to Radio Frequency Radiation. Caution: Exposure to Radio Frequency Radiation. This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARRANTY WARRANTY WARRANTY WARRANTY Effective date: January 1, 2002 Effective date: January 1, 2002 Effective date: January 1, 2002 Effective date: January 1, 2002 EMX Industries, Inc. warrants all products to be free of defects in materials and workmanship for a period of 2 years under normal use and service from the date of sale to our customer. This warranty does not cover normal wear and tear, abuse, misuse, overloading, altered products, damage caused by incorrect connections, lightening damage or use other than the intended design. There is no warranty of merchantability. There are no warranties expressed or implied or any affirmation of fact or representation except as set forth herein. EMX Industries, Inc. sole responsibility and liability, and the purchaser’s exclusive remedy shall be limited to the repair or replacement at EMX Industries option of a part or parts found not conforming to the warranty. In no event shall EMX Industries, Inc. be liable for damages of any nature, including incidental or consequential damages, including but not limited to damages resulting from non-conformity, defect in material or workmanship.

8 Document no. 10100304 4564 Johnston Parkway Cleveland, Ohio 44128 United States of America WEB http://www.emxinc.com E-mail [email protected] Telephone (216) 518-9888 Fax (216) 518-9884 Revision 1.2 10.29.09