Furrion FF40S15A-BL Operating And Installation Instructions

Thank you for purchasing a FF40S15A-BL 40” Built-in Electric Fireplace. SUITABLE FOR DOMESTIC HOUSEHOLD USE, RV’s & MODULAR HOMES Before installation and use, please read all instructions carefully. This will ensure safe use and reduce the risk of injury. ...

Function Icon Description Timer Pressing the button will cycle through the timer setting: 30 minutes to 5 hours. Temperature down Decrease the heat output (remote control only). Temperature up Increase the heat input (remote control only). Troubleshooting Problem Root cause Corrective action Display shows “ ” The thermostat sensor is broken or disconnected. Unplug the fireplace and remove the back panel. Check that the thermostat is plugged into the main circuit board. If this does not solve the problem, contact customer service for a replacement thermostat s ...

Note: The element retains heat after shut down. There is a built-in cool down period of 30 seconds before the blower shuts off completely. Note: To operate correctly, the remote control must be pointed toward the control panel. Function Icon Description POWER Turn on or turn off the fireplace. Flame Select one of four brightness levels. Fireplace 1. Press once to activate the low heat setting. 2. Press the but ...

in an RV, ensure to leave a minimum clearance of 6 inches from any object when the unit is turned off and 3 feet from the unit when in operation. CAUTION: Do not install the fire- place insert directly on carpet or similar surfac- es which may restrict air flow. CAUTION: If installing the fireplace in a carpeted area, place a one-piece solid, flat surface under the fireplace. 2. Secure the fireplace to the cabinet with the (4) supplied mounting screws. 3. Align the glass assemble into the grooves on the left and right sides of the unit and gen ...

Furrion reserve the right to alter the information in this document without prior notice. Furrion shall not be liable for technical or editorial errors or omissions contained herein. FURRION.COM ...

Note: The element retains heat after shut down. There is a built-in cool down period of 30 seconds before the blower shuts off completely. Note: To operate correctly, the remote control must be pointed toward the control panel. Function Icon Description POWER Turn on or turn off the fireplace. Flame Select one of four brightness levels. Fireplace 1. Press once to activate the low heat setting. 2. Press the but ...