Furuno FEA-2107-BB Installation Manual

File Specifications

Brand: Furuno
Category: Monitor
Model: FEA-2107-BB (Installation Manual), prPsammew/S5o
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 168 pages

Download PDF

Download Furuno FEA-2107-BB Manual (168 pages)

Read Online:

Read the Furuno FEA-2107-BB Installation Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

Important things to do after reinstall

After you have reinstall ECDIS program, you will need to initialize ECDIS to restore previous state. Automatic erase of the old situation memory and internal files has removed the following setups and files from the hard disk. • Chart details has been set as initial default values. For information about how to set desired values, see "Control of visible chart features" in the Operator’s Manual. • Select Navigation sensors from the Sensor page. • SENC format of S57 charts has been removed. • Manual Reinstall has been removed. ...

(Serial channel for gyro)

• PminRadius xx (Minimum available radius. Must be equal to ECDIS parameter.) For proper track control, software of AEU511 must be "SEM200 Version Aeu2_3 Compiled 6-5-2003 15:37" and MPI31 must be "MIP2 Version Mip2 Compiled 7-5-2003 14:55". Notes (Emergency instructions for cases when software of AEU511 or MIP31 is older version.) • Parameter "ctsdef" requires careful special attention. • When software of AEU511 is older than "SEM200 Version Aeu2_3 Compiled 13-2-2002" • ctsdef 0 cts=hsc when leaving remote (continue turn) ...

3.3 Adjustments for the LAN Adapter EC-1010

3.3.1 Setup for the LAN adapter EC-1010 program The following tools are needed for programming LAN adapter: • Ordinary serial RS-232C line cable to make connection from COM1 port to Connector J13 of LAN Adapter. You need to set the jumpers of the LAN adapter to enable connector J13 and programming mode. To change J1 (CH 1) connector to J13 Connector for programming, set as below. J17 CTS1-GND J14 TXP J15 RXP To enable manual startup and programming, set as below. J16 INIT-GND 3.3.2 IP address agreement for LAN Adapter EC-1010 Th ...

8. Select desired Setup Type.

Note: This example is full ECDIS installation without Conning Display. 9. Enter password “ecdis” for ecdis user and press the Next button. 10. Select destination location for ECDIS and press the Next button. ...

Furuno FEA-2107-BB user guide recommended for: FBA3, 1941, FMV-603, DRS6A, FR/FAR-2835SW/2865SW.

⚠️ Download Safety

The Monitor Installation manual (168 pages) is completely safe to download (last scan date: 25/03/2026).

Related PDF Instructions for Furuno FEA-2107-BB:

Monitor Equipment: Frequently Requested

Have some Questions about Furuno FEA-2107-BB Device?

Get valuable and actionable advices from other Furuno FEA-2107-BB device users. Describe your problem or question, regarding the using of FEA-2107-BB, in as much detail as possible, and other users will be able to answer you.