Hirschmann RS20 Reference Manual
Text of the manual
Release 4.0 11/07
Reference Manual
Command Line Interface
Industrial ETHERNET Gigabit Switch
RS20
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2007 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyrig
Release 4.0 11/07
3
Content
Content
3
1
Command Structure
11
1.1
Format
12
1.1.1 Command
13
1.1.2 Parameters
13
1.1.3 Values
14
1.1.4 Conventions
15
1.1.5 Annotations
16
1.1.6 Special keys
17
1.1.7 Special characters in scripts
18
1.1.8 Secrets in scripts
20
2
Quick Start up
21
2.1
Quick Starting the Switch
22
2.2
System Info and System Setup
Release 4.0 11/07
4.1.7 show interface
40
4.1.8 show interface ethernet
42
4.1.9 show interface switchport
49
4.1.10 show logging
49
4.1.11 show mac-addr-table
50
4.1.12 show signal-contact
51
4.1.13 show running-config
52
4.1.14 show sysinfo
53
4.1.15 show temperature
55
4.1.16 snmp-server
55
4.2
Class of Service (CoS) Commands
56
4.2.1
Release 4.0 11/07
5
4.3.23 snmp-server contact
82
4.3.24 snmp-server location
83
4.3.25 snmp-server sysname
83
4.3.26 snmp-server enable traps
84
4.3.27 snmp-server enable traps chassis
85
4.3.28 snmp-server enable traps l2redundancy
86
4.3.29 snmp-server enable traps linkmode
87
4.3.30 snmp-server enable traps multiusers
88
4.3.31 snmp-serve
