inDESIGN ID-CDFM Installation & Operation Manual

PAGE 2 CD Player/USB/SD Input/FM Tuner The iD-CDFM is a multi format audio player for any application requiring reliable audio playback. The inDESIGN iD-CDFM is a versatile audio player featuring CD player (CD-R/-RW and MP3), USB/SD input (MP3 and WMA) and FM tuner with infra-red remote control. It provides several operating modes (Random, Play All, Repeat, Program, Mute) and an intuitive search mode (using the front display). It is possible to connect external storage devices such as USB drives, SD cards or external hard drive. In addition the front panel provides headphone output with separate volume control and FM Radio presets. INTRODUCTION INTRODUCTION 2 IMPORTANT SAFETY INSTRUCTIONS 3 FRONT PANEL 4 REAR PANEL AND REMOTE 5 BLOCK DIAGRAM 6 SPECIFICATIONS 7 WARRANTY INFO 8 CONTENTS Electrical and Safety Warnings THESE SERVICE INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. CAUTION The lightening flash with arrowhead symbol, with an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

PAGE 3 IMPORTANT SAFETY INSTRUCTIONS WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. To prevent injury please refer to these instructions for electrical and safety information before installing or operating the apparatus. 6. No naked flame sources such as lighted candles should be placed on the apparatus. 7. Operation of this apparatus is recommended for moderate climates only. 8. This apparatus must not be exposed to dripping or splashing liquid. No object filled with liquid, such as a vase, should be placed on the apparatus. 9. Clean only with a dry cloth. 10. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 11. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatuses (including amplifiers) that produce heat. 12. Unplug this apparatus during lightening storms or when not in use for long periods of time. 13. Protective Earthing Terminal: The apparatus should be connected to a mains socket outlet with a protective earthing connection. 14. The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable. 15. When not in use and during transportation, please take care of the power cord set, for example, tie up the power cord set with a cable tie/something similar. It should be kept away from sharp edges and the like that can cause abrasion of the power cord set. When put into use again, check that the power cord set is not damaged. If any damage is found, have the unit checked by a qualified service person to replace the power cord set specified by the manufacturer. 16. The terminals marked with symbol of “ “ may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by a qualified service person or the use of ready-made leads or cords. 17. Only use attachments/accessories specified by the manufacturer. 18. Check speaker line load prior to connecting to amplifier using an impedance meter. 19. Refer all servicing to qualified service personnel. Servicing is required if the apparatus has been damaged in any way, such as power-supply cord or plug breakage, damage due to liquid or objects falling onto the apparatus, exposure to rain or moisture, or if the apparatus does not operate normally, or has been dropped. 20. Correct Disposal of this Product: This marking indicates that this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental-safe recycling.

PAGE 4 FRONT PANEL 1. Power Switch: Turns power On/Off. 2. Monitor: Headphone output. 3. Monitor Vol: Level control knob. 4. CD Player: Tray for loading CD. 5. SD Card Slot: For playback of MP3 audio files on suitable media. 6. USB Input: For playback of MP3 audio files (not suitable for charging devices). 7. Numeric Keypad: For memory select of FM channels and Source selection. 8. Backlit Screen: For display of track selection, time display, output select, etc. 9. Function Buttons: CD tray Open/Close, Track Next/Last, Track Scan Forward/Reverse. 10. Function Buttons: Time display select, Enter, Back (for Source mode), FM On/Off, Output Select. 11. (A) In CD Mode: Play/Pause, Return, Repeat, Pitch +/- (for all Source audio). (B) In FM Mode: Memory store, Frequency select Down/Up, Channel preset Down/Up. 7. 8. 9. 10. 1. 2. 3. 4. 5. 6. 11.A/B To store FM radio memories: A. Use Frequency select +/- in section 11 to locate desired FM station. B. Press Memory store (green) button in section 11. C. Select your choice of memory number (1-8) with numeric keypad in section 7. D. To store a second FM station, repeat steps A-C, while selecting a different memory number for storage. USB reader format data: 1. Maximum size of USB memory stick: 16 GB. 2. File Allocation Table format is FAT 32. 3. File types it will read/play: MP3. 4. No folders applicable. SD Card reader format data: 1. Maximum size of SD Card memory: 16 GB. 2. File Allocation Table format is FAT 32. 3. File types it will read/play: MP3. 4. No folders applicable.

PAGE 5 REAR PANEL 12. Mains Socket: The unit is connected to the mains circuit with a standard IEC type power head. 13. Audio Output: L/R RCA outputs. 14. Antenna Socket: For FM radio. 12. 14. 13. REMOTE Source Select Display Numeric Keypad for selecting FM memories Open/Close CD Tray Output Select Transport Cotrols Master Volume Pitch Control

PAGE 6 SPECIFICATIONS SPECIFICATION General Output Level @1kHz, 0dB 1.2V +/- 0.3V Frequency Response 20Hz-20kHz +/- 2dB Separation 1kHz, 0dB >60dB THD + Noise 1kHz, odB <0.05% S/N Ratio >80dB FM Tuner Tuning Range 87.5MHz - 108MHz IF Frequency & Rejection 10.7MHz >80dB Image Rejection >30dB S/N Ratio 1mV/M Input 46dB THD 1mV <1.0% Auto Tuning Sens. <50uV Physical Dimensions (H x W x D) 482 x 44 x 250 mm Weight 5 kg Shipping Dimensions (H x W x D) 530 x 37 x 120 mm * Disclaimer:� Instructions�and�specifications�are�correct�at�time�of�printing. � � Information�within�may�be�subject�to�change�without�notice.

PAGE 7 WARRANTY INFORMATION – Terms of Warranty – 5 Years Consumer Guarantees When you purchase a National Audio Systems distributed product, you have the peace of mind in knowing that your product is covered by the NAS warranty. The NAS warranty is provided by National Audio Systems Pty Ltd (ABN 50 085 679 894), 127 Merrindale Drive, Croydon, Victoria 3136. [‘NAS’] The Australian Consumer Law protects consumers by giving them certain guaranteed rights when they buy goods and services. Rights guaranteed under the Australian Consumer Law include; • The goods are of acceptable quality; • The goods match their description or any sample or demonstration model; • The goods are fit for any represented purpose or purpose which the consumer has made known; • Repairs and spare parts are reasonably available (unless notice has been provided that repairs or spare parts would not be available); and • The services are carried out with reasonable care and skill and are completed within a reasonable time These rights are called ‘Consumer Guarantees’ and apply automatically whenever goods or services are supplied to a consumer. These Consumer Guarantees cannot be refused, changed or limited. Consumer Guarantees have no set time limit and depending on the price and quality of goods a Consumer may be entitled to a remedy after any manufacturers’ or NAS’s extended warranty has expired. The Specific Warranty Table Information outlines the warranty period, warranty type and any specific exclusions for your NAS product. NAS considers the warranty period specified in the Specific Warranty Table to be a reasonable warranty period having regard to the price, design, manufacture and expected use of the product. General Warranty (‘Warranty’) NAS products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure or if the goods fail to be of acceptable quality. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law. Subject to the terms and conditions set out below, and unless otherwise specified in the Specific Warranty Information for your NAS product, NAS agrees to repair or replace, at NAS’s cost, the NAS product purchased by you in Australia or New Zealand from NAS or a NAS authorised reseller when the product does not perform substantially in accordance with the specifications during the warranty period specified in the Specific Warranty Table for your NAS product. NAS makes no other express warranties in respect of your NAS product. To make a claim under this Warranty, valid proof of purchase must be presented when the warranty claim is made, along with any other required information. The Warranty offered by NAS is not transferable. The Warranty will only apply if your NAS product has been installed and used in accordance with NAS’s recommendations as noted in the operating instructions. Warranty Exclusions The Warranty does not cover damage caused by; • Misuse or abuse of the product by You; • Incorrect operation or not following the operation instructions (as noted in the operating instructions); • Improper installation; • Incorrect or improper maintenance or failure to maintain the product; • Failure to clean or improper cleaning of the product; • Incorrect voltage or non-authorised electrical connections; • Adverse external conditions such as incorrect or fluctuations in electrical voltage, thunderstorm activity, acts of God, acts of terrorism, damage caused by vermin, or any other circumstance beyond NAS’s control; • Exposure to excessive heat, moisture or dampness; • Exposure to abnormally corrosive conditions; • Alterations or modifications to the product made by You or a third party; or • Damage as a result of accident, liquid, grit, impact or lack of proper care as indicated in the operating instructions; • Damage resulting from the use of cleaning solvents such as acetone The Warranty does not apply if any serial number or appliance plate on the product has been tampered with, removed or defaced. The Warranty does not apply if the product has been repossessed under any financial agreement. The Warranty excludes accessories and consumable goods which have ceased working through normal wear and tear such as, but not limited to, batteries, lamps and other parts classifiable as a consumable part. The Warranty does not cover the loss of any data howsoever caused. You shall be responsible for backing up and protecting data against loss, damage or destruction. Products presented for repair may be replaced by refurbished products of the same type rather than being repaired. Refurbished parts may be used to repair the products. Replacement of the product or a part does not extend or restart the Warranty Term. The product will be at the owner’s risk whilst in transit to and from all NAS authorised service centres, unless transported by NAS or its authorised representatives. NAS and its authorised service centres may seek reimbursement of any costs incurred by them when the product is found to be in good working order. The cost of claiming under this warranty, including return of any product to NAS is to be borne by the consumer. The Warranty excludes removal or reinstallation costs. * All inDESIGN products come with a 5 year warranty term. For further information and warranty claims, refer to our Support page at www.nationalaudio.com.au.