jablotron 100 Operation & User’s Manual

buttons in the “Section” tab. If a keypad with at least one controllable segment is used in the system, then it is possible to set/unset the system in J-Link using an on-screen virtual keypad (click on “Keypad“ in the main menu). Warning: When the system is controlled via PC, it won’t prevent setting with a triggered device. Be careful when you control the system this way! 2.9 PG OUTPUTS CONTROL VIA… Keypad segment A PG output switches on by pressing a button on the rig ...

Meaning: cccc cccc is a 4, 6 or 8-digit code. Allowed codes… from 0000 to 99999999 Default control panel code Administrator: 1234; 123456; 12345678; The security of access codes, contactless RFID devices and remote controls A control panel enables each user to be assigned with one 4, 6 or 8-digit code and up to two RFID tags for system authorization. User authorization is required during each manipulation via keypad, voice menu, a computer, web or mobile apps. Code length affects number of possible combinations and therefore code security. The number of code c ...

Authorization with a user code is done by typing a valid code into a keypad or with an RFID tag. It’s possible to use 4, 6 or 8-digit codes in the system. The system can be confi gured to be used with or without prefi x codes. Code with a prefi x: nnn*cccc Meaning: nnn is the prefi x, which is number of the user’s position (0 to 300) * is a separator (* key) cccc is a 4, 6, or 8-digit code. Allowed codes… from 0000 to 99999999 Default control panel code Administrator: 1*1234; 1*123456; 1*12345678; Warning: The main Administrator code must start with the pr ...

a The system doesn’t send event notifi cations (SMS, email, push messages) a Virtual system keypads are not available a A detector’s photo gallery and photos upon request are not available a Thermometers, electricity meters and other supported automation devices are not displayed A password will be sent to the user’s e-mail address, which also serves as a login name. The password can be changed at any time in the settings. Once logged into the account, the system shows all active devices that can be monitored or controlled, depending on the r ...

2. OPERATING THE JABLOTRON 100 SYSTEM Cancel warning indication Section Control Event memory Setting prevented Bypassed detectors Faults in system System status Settings Display setting Allows you to cancel alarm/unsuccessful setting indication in all sections to which the user has access rights Allows you to control the system‘s sections to which the user has access rights and are enabled in the internal settings. Displays a detailed list of the event memory. Shows a list of triggered detectors preventing setting the system, provid ...

buttons in the “Section” tab. If a keypad with at least one controllable segment is used in the system, then it is possible to set/unset the system in J-Link using an on-screen virtual keypad (click on “Keypad“ in the main menu). Warning: When the system is controlled via PC, it won’t prevent setting with a triggered device. Be careful when you control the system this way! 2.9 PG OUTPUTS CONTROL VIA… Keypad segment A PG output switches on by pressing a button on the rig ...

Provides unsetting of the system in a special mode. The system seemingly unsets, however it triggers a silent panic alarm, which is reported to selected users (including ARC). Unsetting under duress is executed by adding 1 to the last number in a valid code. Contact your service technician if you want to use this feature. Example for a code with the prefi x: Valid code: 2*9999 Code for unsetting under duress: 2*9990 Example for a code without the prefi x: Valid code: 9999 Code for unsetting under duress: 9990 2.1.3 PARTIAL ALARM SETTING The system can also be confi g ...

and their combinations: When unsetting the alarm using the segment buttons, user authorization is always required. When setting the alarm and controlling automated processes using the segment buttons, user authorization is optional for each segment. A user can be authorized by entering their assigned code or using their RFID card/tag. Each user can have one code and up to two RFID chips (cards or tags). We recommend using JABLOTRON 100 contactless RFID chips for higher security. Other RFID chips e.g. from system Oasis or third party chips (may not be compa ...