Karcher K 1100 Operating Instructions Manual

read these operating instructions and act in accordance with them. 59651430 (10/13) K 1.100

these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking. In the event of missing accessories or any transport damage, please contact your dealer. This high-pressure cleaner is designed for domestic use only: – to clean machines, vehicles, buildings, tools, facades, terraces, garden equip- ment etc. using a high-pressure water jet (and detergents if required). – with accessories, replacement parts and detergents approved by KÄRCH- ER. Observe the instructions provided with these detergents. � Danger Immediate danger that can cause severe injury or even death. � Warning Possible hazardous situation that could lead to severe injury or even death. Caution Possible hazardous situation that could lead to mild injury to persons or damage to property. The high pressure jet may not be directed at persons, ani- mals, live electrical equipment or at the appliance itself. Pro- tect the appliance against frost. The packaging material can be recy- cled. Please do not place the packag- ing into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable ma- terials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appliances using appropriate collec- tion systems. The warranty terms published by the rele- vant sales company are applicable in each country. We will repair potential failures of your appliance within a one year warranty period free of charge, provided that such failure is caused by faulty material or de- fects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Ser- vice centre. Please submit the proof of pur- chase. (See address on the reverse) Contents General information . . . . . . . . . . . . . . 2 Safety instructions. . . . . . . . . . . . . . . . 3 Description of the Appliance . . . . . . . . 5 Operation . . . . . . . . . . . . . . . . . . . . . . 6 Transport. . . . . . . . . . . . . . . . . . . . . . . 7 Storage . . . . . . . . . . . . . . . . . . . . . . . . 8 Maintenance and care . . . . . . . . . . . . 8 Troubleshooting . . . . . . . . . . . . . . . . . 9 Technical specifications . . . . . . . . . . . 9 Spare parts . . . . . . . . . . . . . . . . . . . . . 11 General information Scope of delivery Proper Use Symbols in the operating instructions Symbols on the machine Environmental protection 1 Year Warranty

socket with wet hands.  The appliance must not be used if the power cord or important parts of the ap- pliance, e.g. high pressure hoses, trig- ger gun or safety devices are damaged.  Check the power cord and mains plug for damage before every use. If the power cord is damaged, please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician.  Check the high pressure hose for dam- age before every use. Please arrange for the immediate replacement of a damaged high pressure hose.  The appliance may not be used in areas where a risk of explosion is present.  If the appliance is used in hazardous ar- eas (e.g. filling stations) all of the safety provisions and operating instructions detailed in this manual must be ob- served.  High pressure jets can be dangerous if improperly used. The jet must not be di- rected at persons, animals, live electri- cal equipment or at the appliance itself.  The high pressure jet must not be di- rected at other persons or directed by the user at him/herself to clean clothing or footwear.  Never use the appliance to clean ob- jects containing hazardous substances (e.g. asbestos).  Vehicle tyres or tyre valves are suscep- tible to damage from the high pressure jet and may burst. The first indication of this is a discolouration of the tyre. Dam- aged vehicle tyres/tyre valves are high- ly dangerous. Ensure that a distance of at least 30 cm is observed when clean- ing with the jet!  Risk of explosion! Do not spray flammable liquids. Never draw in fluids containing solvents or undiluted acids! This includes petrol, paint thinner and heating oil. The spray mist thus generated is highly inflamma- ble, explosive and poisonous. Do not use acetone, undiluted acids or sol- vents as they are damaging to the ma- terials from which the appliance is made. � Warning  The mains plug and the coupling of an extension cable must be watertight and must never lie in water. Moreover, the coupling may never lie on the ground. The use of cable reels that ensure that the sockets are at least 60 mm above the ground is recommended.  Unsuitable electrical extension cables can be hazardous. Only use electrical extension cables outdoors which have been approved and labelled for this pur- pose and have an adequate cable cross-section: 1 - 10 m: 1.5 mm2; 10 - 30 m: 2.5 mm2  Always fully unroll electrical cables from the cable drum.  High pressure hoses, fixtures and cou- plings are important for the safety of the appliance. Only use high pressure hos- es, fixtures and couplings recommend- ed by the manufacturer.  The appliance must not be operated by children or persons who have not been instructed accordingly.  This appliance is not intended for use by persons with limited physical, senso- ry or mental capacities or lacking expe- rience and/or skills, unless such persons are accompanied and super- vised by a person in charge of their safety or they have received precise in- structions on the use of this appliance and have understood the resulting risks. Safety instructions

ance.  Supervise children to prevent them from playing with the appliance.  Keep packaging film away from children - risk of suffocation!  The operator must use the appliance correctly. When working with the appli- ance, he must consider the local condi- tions and pay due care and attention to other persons, in particular children, who are nearby.  Do not use the appliance when there are other persons around unless they are also wearing safety equipment.  Wear protective clothing and safety goggles to protect against splash back containing water or dirt.  This appliance was designed to be used with detergents which are sup- plied or recommended by the manufac- turer. The use of other detergents or chemicals may compromise the safety of the appliance. Caution  In case of extended downtimes, switch the appliance off at the main switch / ap- pliance switch or remove the mains plug.  Do not operate the appliance at temper- atures below 0 °C.  Observe a distance of at least 30 cm when using the jet to clean painted sur- faces to avoid damaging paintwork.  Never leave the appliance unattended when it is in operation.  Make sure that the power cable or ex- tension cables are not damaged by run- ning over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges.  All current-conducting parts in the work- ing area must be protected against jet water.  The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364.  The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance.  For safety reasons, we recommend that you operate the appliance only via an earth-leakage circuit breaker (max. 30 mA).  Cleaning operations which produce oily waste water, e.g. engine washes, un- derbody washes, may only be carried out using washing stations equipped with an oil separator. Caution Safety devices protect the user and must not be modified or bypassed. The appliance switch prevents unintention- al operation of the appliance. This lock locks the lever of the trigger gun and prevents the inadvertent start of the ap- pliance. The overflow valve prevents the permissi- ble working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high pressure jet is stopped. If the lever is pulled the pump is turned on again. Caution Create stability for the appliance prior to all work on or with the appliance to prevent ac- cidents or damage. – The stability of the appliance is warrant- ed when it is placed onto an even sur- face. Safety Devices Power switch Lock trigger gun Overflow valve with pressure switch Prerequisites for the appliance's stability

2 Appliance switch "0/OFF“/ „I/ON“ 3 Storage for mains connection cable 4 Carrying handle 5 Coupling element for water connection 6 Connection for water supply with filter 7 Detergent suction hose (with sieve) 8 Mains cable with mains plug 9 Trigger gun 10 Lock trigger gun 11 Clamp for high pressure hose 12 High pressure hose 13 Spray lance with high pressure nozzle Description of the Appliance

prior to start-up. Illustrations on Page 5 Illustration  Attach the carrying handle. Illustration  Pull out the clamp for the high-pressure hose from the trigger gun (e.g. with a small screwdriver). Illustration  Connect high pressure hose to trigger gun.  Push the clamp in until it locks. Check the secure connection by pulling on the high-pressure hose. According to the applicable regula- tions, the appliance must never be used on the drinking water supply without a system separator. Use a suitable system separator manufactured by KÄRCHER; or, as an alternative, a system separator as per EN 12729 Type BA. Water flowing through a system separator is con- sidered non-drinkable. Caution Always connect the system separator to the water supply, never directly to the appliance! Note: Impurities in the water can damage the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended. Observe regulations of water supplier. For connection values, see type plate/tech- nical data.  Use a fibre-reinforced water hose (not included) with a standard coupling. (Minimum diameter 1/2 inch (13 mm), minimum length 7.5 m).  Screw the coupling element to the wa- ter connection on the appliance.  Push the water supply hose onto the coupling unit, then connect it to the wa- ter supply. Caution Dry runs lasting longer than two minutes lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Troubleshooting".  Connect the high pressure hose to the high pressure connection of the appli- ance.  Push the spray lance into the trigger gun and fasten it by turning it through 90°.  Completely open the water tap.  Insert the mains plug into the socket.  Turn on the appliance “I/ON”. � Danger The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly.  Unlock the lever on the trigger gun.  Pull on the lever of the trigger gun; the device will switch on. Note: Release the lever of the trigger gun; the device will switch off again. High pres- sure remains in the system. For normal cleaning tasks. Not suitable for use with detergents. Operation Before Startup Water supply Water supply from mains Start up Operation Spray lance with high pressure nozzle

gents and care products to carry out the re- spective cleaning task, as these were specifically developed for your appliance. The use of other detergents and care prod- ucts may lead to premature wear and can invalidate your warranty claims. Please ob- tain information at your local dealer or re- quest information directly from KÄRCHER.  Pull detergent suction hose as far as is required out of the housing.  Suspend end of detergent suction hose in a container filled with detergent.  Detach spray lance from the trigger gun. Work only with the trigger gun. Note: This will mix the detergent with the water stream.  Spray the detergent sparingly on the dry surface and allow it to react, but not to dry.  Spray off loosened dirt with the high pressure jet.  Release the lever on the trigger gun.  Lock the lever on the trigger gun.  During longer breaks (more than 5 min- utes), also turn the appliance off using the "0/OFF" switch. Caution Only separate the high-pressure hose from the trigger gun or the appliance while there is no pressure in the system.  After working with detergent, suspend detergent suction hose in a container filled with clear water, switch the appli- ance on for around 1 minute once the spray lance has been removed and rinse until water runs clear.  Release the lever on the trigger gun.  Turn off the appliance "0/OFF".  Turn off tap.  Press the lever on the trigger gun to re- lease any remaining pressure in the system.  Lock the lever on the trigger gun.  Detach the appliance from the water supply.  Pull out the mains plug.  Stow away the mains cable, the high- pressure hose and accessory on the appliance. Caution In order to prevent accidents or injuries, keep in mind the weight of the appliance during transport (see Specifications).  Lift appliance by the carrying handle and carry it.  Secure the appliance against shifting and tipping over. Working with detergent Recommended cleaning method Interrupting operation Finish operation Transport When transporting by hand When transporting in vehicles

keep in mind the weight of the appliance when selecting a storage location for it (see Specifications). Prior to extended storage periods, as dur- ing the winter, also observe the instructions in the Care section.  Park the machine on an even surface.  Stow away the mains cable, the high- pressure hose and accessory on the appliance. Caution Protect the appliance and its accessories against frost. The appliance and its accessories can get destroyed through frost if there is any water residues in them. To avoid damage to them:  Completely drain all water from the ap- pliance: Switch the appliance on with detached high pressure hose and de- tached water supply (max. 1 minute) and wait, until no more water exits at the high pressure connection. Turn off the appliance.  Store the appliance and the entire ac- cessories in a frost free room. � Danger Turn off the appliance and remove the mains plug prior to any care and mainte- nance work. Prior to longer periods of storage, e.g. in the winter:  Remove filter from suction hose for de- tergent and clean under running water.  Pull out the sieve in the water connec- tion using flat-nose pliers and clean un- der running water. The appliance is maintenance free. Use only original KÄRCHER spare parts. You will find a list of spare parts at the end of these operating instructions. Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion. Storage Storing the Appliance Frost protection Maintenance and care Care Maintenance Spare parts Special accessories

the help of the following overview. If in doubt, please consult the authorized customer service. � Danger Turn off the appliance and remove the mains plug prior to any care and mainte- nance work. Repair works may only be performed by the authorised customer service.  Pull on the lever of the trigger gun; the device will switch on.  Check whether the voltage indicated on the type plate corresponds to the volt- age of the mains supply.  Check the mains connection cable for damages.  Appliance ventilation: Switch the appli- ance on with the high-pressure hose detached and operate (max. 2 minutes) until the water exits the high-pressure connection without bubbles. Switch off appliance and reconnect high-pressure hose.  Check the water supply.  Pull out the sieve in the water connec- tion using flat-nose pliers and clean un- der running water.  Clean high-pressure nozzle: Remove dirt and debris from the nozzle bore, us- ing a needle and rinse through with wa- ter from the front.  Check water flow quantity.  Slight leakage from the appliance pump is normal. If the leakage increases con- tact the authorized customer service.  Detach spray lance from the trigger gun. Work only with the trigger gun.  Clean the detergent suction hose filter.  Check the detergent suction hose for kinks. Subject to technical modifications! Troubleshooting Appliance is not running Pressure does not build up in the appliance Strong pressure fluctuations Appliance is leaking No detergent infeed Technical specifications Electrical connection Voltage 220-240 1~50/60 V Hz Connected load 1,2 kW Mains fuse (slow-blow) 10 A Protective class II Protection class IP X5 Water connection Feed pressure 0,2-1,2 MPa Max. feed temperature 40 °C Min. feed volume 6 I/min Performance data Working pressure 6,7 MPa Max. permissible pressure 10 MPa Water flow rate 4,5 I/min Detergent flow rate 0,3 I/min Recoil force of trigger gun 10 N Hand-arm vibration value Uncertainty K <2,5 0,3 m/s2 m/s2 Sound pressure level LpA Uncertainty KpA 76 2 dB(A) dB(A) Dimensions and weights Length 165 mm Width 236 mm Height 427 mm Weight, ready to operate with accessories 4,5 kg