Meyer Sound LD-1A Operating Instructions Manual
Text of the manual
LD-1A Line Driver
Power
15V
+-
Mute
CH 1
Sub φ
DS-2
& Sub
Crossover
DS-2 φ
Mute
Mute
Mute
Array
EQ
Lo Cut
CH 2
DS-2
& Sub
Crossover
Mute
Mute
Mute
Mute
Signal Mute-Clip
CH 5
Mute
Mute
Mute
Signal Mute-Clip
CH 8
Mute
Signal Mute-Clip
CH 6
Signal Mute-Clip
CH 7
Signal Mute-Clip
CH 4
Signal Mute-Clip
CH 3
Out
In
Sub
DS-2 &
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, California 94702
Telephone: 510 - 486 - 1166
FAX:
510 - 486 - 8356
E-mail: [email protected]
www.meyersound.com
Meyer Sound Germany GmbH
Carl Zeiss Strasse 13
D-56751 Polch, Germany
Telephone: 49.2654.9600.58
FAX:
49.2654.9600.59
Email: [email protected]
Contact Information
!
Pour indiqu
LD-1A Signal Flow Diagram................................ 3
Introduction......................................................... 4
Audio Input ......................................................... 4
AC Power ............................................................. 4
Main Channels 1 and 2........................................ 5
Contents
Auxili
The Meyer LD-1A Line Driver combines functions
previously accessed on the control electronics units for
externally amplified Meyer loudspeakers with new
features, and locates them in a self-contained device
accessible to the sound engineer during setup and
performance. The LD-1A
•
integrates different types of Meyer self-powered
speakers int
AC Inlet and Voltage Select Switch
The LD-1A uses an international standard IEC 320
Mains AC inlet. This convenient rear panel receptacle
accepts many power cord types for mains outlets used
throughout the world. The LD-1A must have the correct
power cord for the AC power in the area in which it will
be used.
The LD-1A operates in two AC voltage r
