Mistral MTF-D5070 Instruction Manual

Model : MTF-D5070 Please read and save this instructions before use

1. Front guard 2. Spinner 3. Blades 4. Rear guard 5. Base 6. Power switch & wind speed 7. Control panel 8. Handle 9. Remote controller holder 10. Remote controller 11. AC Adapter 11

Oscillation Fan Power : 28W AC Adaptor Input Voltage : AC100-240V~50/60Hz Output Voltage : 24Vdc ≈ 1.25A AC Adaptor Cord Length: 1.6m Speed (RPM) : 300 – 1850 ** all specifications are subject to change without prior notice Safety Precaution IMPORTAN: PLEASE READ BEFORE INSTALLATION 1. Read this instruction manual carefully before using the appliance 2. Do not use force to tilt the fan casing up and down when not in operation. It will cause damage to the oscillation gear 3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard 4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance 5. Check if the power supply matches the specifications mentioned before use 6. Insert the plug to AC mains securely. Do not operate with wet hands or when the plug is wet 7. This appliance is intended for household use only. Not for commercial use. 8. Use it in a dry place. Avoid excessive heat, humidity and water 9. Handle fan blade with care during cleaning 10. Do not operate this appliance without a fan blade, broken or bend fan blade 11. Do not insert finger or other objects into the fan grill 12. Do not use outdoors or windows. Rain drops may cause electrical hazards 13. If any malfunction or abnormality, please stop using the appliance and immediately send it to a nearby Mistral Service Centre 14. Do not pull, lift or carry the appliance by its AC Adapter cord. In order to avoid damages to the AC adaptor cord, do not pull the cord around sharp corners and edges

1. Unplug the product before cleaning. After the motor is cooled down, use a cloth to clean the grille and product surface 2. Do not use wet cloth or pour water on the product when cleaning. Excess water may enter the motor and cause electric shock 3. Do not use any corrosive cleaning solution to clan the appliance 4. Do not use the appliance with metal scouring pads as it may scratch the surface 5. Do not immerse the appliance in water or other liquids Operating Instruction - You can either control the fan by using remote control or select your options from control panel Remote control - The remote control can be operated within 3.5 – 5 meter radius - Light Mode : by default the Light is ON, you may press at the button to OFF the light - You may refer to other functions of the Remote control as per below :- a) Power switch & wind speed a. At Control Panel, you may turn the rotary knob clockwise for the speed selection. It has 8 selection of speed control b) Lift / Right Swing a. Quiescent state during initial settling. b. Press the button for Lift and Right selection c) Up / Down Swing a. Quiescent state during initial settling. b. Press the button for Up and Down selection Note : do not adjust up and down swing angle with hands d) On / Off Timer Function a. At Standby Mode, you can preset the fan to be on at longest 4 hours b. You can set the OFF timer to longest 7 hours. c. LED light will display the selected timer e) Mode a. By default, it is normal mode which LED light is off b. You may press the Mode button for mode selection : Normal / Natural / Sleeping mote. LED Light will shows the mode selection

KHIND ALLIANCES SDN BHD ( 811092-W) No 2, Jalan Astaka U8/82, Seksyen U8 Bukit Jelutong, 40150 Shah Alam, Selangor D.E., Malaysia Tel : 603-7839 2000 Fax : 603-7845 0300 Careline : 1800 88 0032 Email : [email protected] Webside : www.mistral.com.my