Motorola HPD 1000 Operation & User’s Manual

Quick Reference Card Product Safety and RF Exposure Compliance ATTENTION! This modem is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C99) to ensure compliance with RF energy exposure limits. BASIC OPERATION Reset Modem Change IP Address LED INDICATIONS Before using this product, read the operating instructions for safe usage contained ...

13 General Modem Features This section contains information associated with the basic features that is offered by your HPD 1000 modem. Location Services Offered The personnel location tracking service allows the radio user and location application servers to determine the current location of a mobile HPD radio. Location alone or combined with other information about the environment (e.g. a map) enables value-added applications such as tracking of resources. With the GPS feature, it is possible to enable or disable the location service of an Subscriber Unit using CPS. When com ...

Throughout the text in this publication, you will notice the use of WARNINGS, CAUTIONS, and Notes. These notations are used to emphasize that safety hazards exist, and care that must be taken or observed. WARNING: An operational procedure, practice, or other condition, which might result in injury or death if not carefully observed. CAUTION: An operational procedure, practice, or other condition, which might result in damage to the equipment if not carefully observed. Note: Note: An operational procedure, practice, or other condition, which is essential to emp ...

iv Contents Computer Software Copyrights ......................................................... ii Documentation Copyrights ................................................................ ii Disclaimer ......................................................................................... ii Notations Used in This Manual .........................................................iii Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Software Installation and Setup ........................................... ...

9 Status Applet and Features Out of range In out of range condition, both the Status Applet's transmit and receive indicators both will go red (non-flashing). ...