Bernafon SoundGate 3 Manual For Wireless Connectivity

with the Phone Adapter 2 A secure connection between the SoundGate 3 and Phone Adapter 2 must be established. Follow the instructions below to prepare the devices for use. Setting Up the Phone Adapter 2 SN2_ILLU_PhoneAdapterToWallPower_CMYK_HI 42 SN2_ILLU_RemovePhoneCableFromPhone_BW_HI 38 SN2_ILLU_InsertPhoneCableToAdapterIn_BW_HI 1. Ensure the Phone Adapter 2 is connected to a power outlet using the micro USB charging unit included in the Phone Adapter 2 packag- ing. The status indicator will be illuminated green when the power source is connected. 2. Remove the telephon ...

Ensure the SoundGate Mic is fully charged, and the SoundGate 3 battery is charged and powered ON. The power indicator on the SoundGate Mic and the status indicator on the SoundGate 3 should be illuminated green. SN2_ILLU_TopLedFlashingBlue_HI 0 6 secs 1. Press and hold the SoundGate 3 Power key for 5 – 6 seconds until the status indicator starts flashing blue rapidly. 2. Press and hold the SoundGate Mic ON/OFF button for 5 – 6 seconds until the LED indicator starts flashing orange rapidly. The pairing is completed when the SoundGate Mic LED ind ...

A secure connection between the SoundGate 3 and SoundGate Mic must be established. Follow the instructions below to prepare the devices for use. Setting Up the SoundGate Mic Ensure the SoundGate Mic is fully charged. To charge the microphone, connect the power adapter to the mini USB connector at the bottom of the microphone. The power indicator will be illuminated green when SoundGate Mic is fully charged. Battery charge connector (mini USB) Constant green light Fully charged After approx. 1.5 hours of charging, device will operate for up to 5 hours Using Sou ...

Sweden ∙ Switzerland ∙ Turkey ∙ UK ∙ USA Manufacturer: Bernafon AG Morgenstrasse 131 3018 Bern Switzerland www.bernafon.com Local Manufacturer & Distributor: Bernafon Canada 500 Trillium Drive, Unit 15 Kitchener, ON, N2R 1A7 www.bernafon.ca Since 1946, we have been passionate about developing quality hearing systems that enable people with hearing diffi culties to enjoy a ...

Bluetooth® streaming (see page 6). If an iPhone (SoundGate App supports iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, and iPhone 4) is used, the hearing aid volume, program, and more can alternatively be controlled via the SoundGate App. The app can be downloaded for free from the App Store. Search for “Bernafon SoundGate”. A demo version is available with the SoundGate App. SoundGate 3 and the mobile telephone must not be paired in this demo mode. Apple, the Apple logo, and iPhone are trademarks ...

A secure connection between the SoundGate 3 and SoundGate Mic must be established. Follow the instructions below to prepare the devices for use. Setting Up the SoundGate Mic Ensure the SoundGate Mic is fully charged. To charge the microphone, connect the power adapter to the mini USB connector at the bottom of the microphone. The power indicator will be illuminated green when SoundGate Mic is fully charged. Battery charge connector (mini USB) Constant green light Fully charged After approx. 1.5 hours of charging, device will operate for up to 5 hours Using Sou ...

Ensure the hearing aids, SoundGate 3, and TV Adapter 2 are all powered ON. Your SoundGate 3 battery should be fully charged for demonstration. A steady green status indicator light will illuminate if you have sufficient battery power. SelectMe With SoundGate 3, you can use multiple TV Adapter 2 devices (e.g., one in the living room and one in the bedroom). 1. Turn on the TV or begin playing a DVD through the TV which has been paired with the TV Adapter 2 To Switch Between Multiple TV Adapter 2 Devices 1. Make sure you are not connected to any TV Ad ...