AZATOM Storm Operation & User’s Manual

(1) When you turn on the Storm it will alert you by speaking “Power ON”. It will also automatically go into Bluetooth Pairing Mode (indicated by the Blue light flashing rapidly). The Storm will auto-reconnect to the last paired device if in range. Otherwise, if it has not been connected to a Bluetooth device before, the Storm will make itself visible to any Bluetooth device which is actively searching. (2) Once in Bluetooth Pairing Mode, activate the Bluetooth function on the media de ...

• Check the Power button is switched on. • Check the battery is out of power / connect the Storm to the Mains. • Check the connection to the Mains. • Make sure you are using the original mains adapter • Battery may be in Protection mode, connect to mains outlet to restore the battery to Operational mode Connection Failure or No Sound: • Verify the Bluetooth function of smart phone or other devices are turned on. Try switching off the Bluetooth on your Phone, Tablet etc. and then switching it back on only when the Storm is i ...

1. Read these instructions. 2. Keep these instructions. Instructions are also available for download at www.azatom.com 3. Heed all Warnings. 4. Follow all instructions. 5. Do not clean the apparatus near or with water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on ...

(1) When you turn on the Storm it will alert you by speaking “Power ON”. It will also automatically go into Bluetooth Pairing Mode (indicated by the Blue light flashing rapidly). The Storm will auto-reconnect to the last paired device if in range. Otherwise, if it has not been connected to a Bluetooth device before, the Storm will make itself visible to any Bluetooth device which is actively searching. (2) Once in Bluetooth Pairing Mode, activate the Bluetooth function on the media de ...

Getting Started. There are 2 ways of powering your Storm speaker: 1. Connecting to a power source using the mains adapter (supplied). 2. Charging up the built-in battery. We recommend leaving your Storm plugged into the mains for at least 10 hours for the first charge. To power the Storm using the cable, simply attach the cable to the DC Input on the speaker and the other end to a power source. This will automatically charge up the battery as well as allowing you to use the speaker. 4. AUX Input Mode… The Aux Mode is selected automatically by connecting th ...

warranty & keep up to date with AZATOM® online at www.azatom.com Contents Controls & Interface.............................................................. 1 What’s In The Box?................................................................. 3 Using the Storm...................................................................... 4 Maintenance............................................................................ 7 Technical Specifications...................................................... 8 Troubleshooting Guide................................................ ...