Dish Network Hopper with Sling Setup
Text of the manual
STEP 1: Unpair Your Remote
If you are unable to turn on your original receiver, go to step 2.
A
Open the front panel on your
original receiver. Press the
SYSTEM INFO button.
B
Locate your remote from the list
on the right side of the screen.
Then, use your remote control to
highlight the “Unpair” option and
press the SELECT button.
QUICK TIP
You will n
STEP 2: Label and Disconnect Your Cables
A
Locate the power cable
for the Hopper that
you are replacing, and
unplug it from the wall.
B
Locate the cable
connected to the “Home
Video Network” port
and attach the blue label
to it. Then, unscrew this
cable from the receiver.
Do not unscrew it from
the wall.
C
Determine the cable
you are using to receive
aud
STEP 2: Label and Disconnect Your Cables (Cont.)
U.S. PATENTS 5602597,
5604544, 5606374, 6151479
MAY APPLY TO THIS PRODUCT.
US:5GXXXXXXXXXXX
DE50
FCC ID: DKNTK421
FCC ID: DKNTK422
C
Locate the cable
connected to the
“Ethernet” port and
attach the yellow label
to it. Then, unplug the
cable from the receiver.
Do not unplug it from
the wall. (You may not
STEP 3: Connect the Cables to Your Replacement Receiver
HOME
DISTRIBUTION
HOME
DISTRIBUTION
A
Connect the Home Video
Network cable to the “Home
Video Network” port on your
Hopper with Sling.
RCA
COMPOSITE
RCA
COMPOSITE
YPbPr
COMPONENT
YPbPr
COMPONENT
B
Connect either the RCA cables,
YPbPr cables, or HDMI cable
to the corresponding port(s) on
your Hopper
