InFocus INL14*UST Operation & User’s Manual

Usage Notice ...................................3 Safety Information ...............................3 Precautions .........................................4 Introduction ......................................6 Package Overview ..............................6 Product Overview ...............................7 Main Unit ..............................................7 Control Panel .......................................8 Input/Output Connections ....................9 Remote Control ..................................10 Installation .....................................11 Connecting the Projector ..................11 Connect to Computer/Notebook ........ 11 Connect to Video Sources .................12 Powering the Projector On / Off ........13 Powering On the Projector .................13 Powering Off the Projector .................14 Warning Indicator ...............................14 LED Lighting Message .......................15 Adjusting the Projected Image ..........16 Adjusting the Projector�s Height ........16 Adjusting the Projector�s Focus .........17 Adjusting Projection Image Size (Diagonal) ..........................................18 User Controls ................................24 Control Panel & Remote Control ......24 Control Panel .....................................24 Remote Control ..................................25 On-screen Display Menus ................27 How to operate .................................27 Image .................................................28 Configuration .....................................30 Settings ..............................................33 Audio ..................................................35 Options ..............................................36 Options | Laser Settings ....................38 3D ......................................................39 Blending mode ...................................40 LAN ....................................................41 EZ View.............................................49 Crestron ............................................54 Multimedia .....................................57 Accessing Multimedia Files ..............57 How to access Multimedia mode .......57 Appendices ....................................61 Compatibility Modes .........................61 VGA Analog .......................................61 HDMI Digital .......................................63 RS232 Commands and Protocol Function List .....................................65 RS232 Port Settings ..........................65 RS232 Signals Connection ................65 Set Commands ..................................66 Ceiling Mount Installation ..................69 Regulation & Safety Notices .............70 Table of Contents

to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Class B emissions limits This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Important Safety Instruction 1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow. 2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture. 3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat. 4. Clean only with dry cloth. 5. Only use attachments/accessories specified by the manufacturer. 6. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):  Unit has been dropped.  Power supply cord or plug has been damaged.  Liquid has been spilled on to the projector.  Projector has been exposed to rain or moisture.  Something has fallen in the projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. 7. Do not let objects or liquids enter the projector. They may touch danger- ous voltage points and short out parts that could result in fire or electric shock. 8. See projector enclosure for safety related markings. 9. The unit should only be repaired by appropriate service personnel.

tenance as recommended in this user�s guide. ▀■ Warning- Do not look into the projector’s lens when the laser is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. ▀■ Warning- Please do not open or disassemble the projector as this may cause electric shock.

cleaning the product. � �Use a soft dry cloth with mild detergent to clean the display housing. � �Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: � �Block the slots and openings on the unit provided for ventilation. ��Use abrasive cleaners, waxes or solvents to clean the unit. ��Do not operate the projector under the following conditions: - In extremely hot, cold or humid environments.  Sea level to 6000 feet Extremely hot: > 35°C Extremely cool: < 5°C  6000 feet above Extremely hot: > 30°C Extremely cool: < 5°C  Extremely humid: > 70% R.H. (Relative Humidity) - In areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic field. - In direct sunlight.

applications in each country, some regions may have different accessories. Power Cord (US/EU) Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Projector HDMI Cable IR Remote Control CD-ROM (User’s Manual & Software)

2. Focus Slide 3. Ventilation (inlet) 4. IR Receiver 5. Ventilation (outlet) 6. Speaker 7. Power Socket 8. Input / Output Connections 9. Lens �The interface is subject to model’s specifications. 6 7 8 4 2 5 3 1 9

7. Power/Standby Key 8. IR Receiver 9. 3 6 9 8 7 2 1 4 5

HDMI2 Connector 2. HDMI1 Connector 3. USB Connector (Service only) 4. Network Connector 5. USB Type A Connector 6. Power Socket 7. VGA-Out/VGA2-In Connector 8. RS-232 Connector (9-pin DIN Type) 9. Composite Video Connector 10. Composite Audio Right 11. Composite Audio Left 12. Audio Output Connector 13. Audio Connector (3.5mm mini jack) 14. Microphone Connector 15. 16. Kensington TM Lock Port �The interface is subject to model’s specifications. 7 1 2 4 9 13 5 3 10 11 15 6 8 12 14 16

5. Menu 6. Exit 7. Zoom In 8. Reset 9. Auto 10. Source 11. Zoom Out 12. Volume +/- 13. Keystone +/- 14. Image 15. Blank Screen 16. Aspect Ratio 17. VGA1 18. HDMI1 19. VGA2 20. HDMI2 21. Video 22. Freeze 23. Number Pad 24. 1 17 22 23 20 18 16 9 15 13 21 24 2 11 14 10 7 12 6 5 3 4 8 19

�Due to the difference in applications for each country, some regions may have different accessories. �(*) Optional accessory Connect to Computer/Notebook E62405SP R 4 8 9 1 5 6 7 Audio Output Microphone External Display Router / Network Switch 1................................................................................................*RS232 Cable 2.....................................................................................................VGA Cable 3..................................................................................................*HDMI Cable 4......................................................................................*Audio Cable/3.5mm 5.................................................................................................. *RJ45 Cable 6....................................................................................................Power Cord 7........................................................................................*VGA Output Cable 8......................................................................................*Audio Output Cable 9.........................................................................................*Audio Input Cable

1................................................*15-Pin to 3 RCA Component/HDTV Adaptor 2..................................................................................................*HDMI Cable 3......................................................................................... *Audio Cable/RCA 4....................................................................................................Power Cord 5................................................................................*Composite Video Cable 6......................................................................................*Audio Output Cable 7..................................................................................................*Audio Cable �Due to the difference in applications for each country, some regions may have different accessories. �(*) Optional accessory Composite Video Output DVD Player, Set-top Box, HDTV receiver Microphone Audio Output

�Turn on the projector first and then select the signal sources. Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Red. 2. Turn on the lamp by pressing “ ” button either on the pro- jector or on the remote. The POWER/STANDBY LED will turn Blue. The startup screen will display in approximately 10 sec- onds. The first time you use the projector, you will be asked to select the preferred language and power saving mode. 3. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push the menu button and go to “Options”. Make sure that the “Source Lock” has been set to “Off”. �If you connect multiple sources at the same time, press the “INPUT” button on the control panel or direct source keys on the remote control to switch between inputs. �When the power mode is in standby mode (power con- sumption < 0.5W), the VGA output/ input and audio will be deactivated when the projector is in standby. POWER/STANDBY 1

projector displays these symptoms. Powering Off the Projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector. The following message will be displayed on the screen. Press the “ ” button again to confirm otherwise the message will disappear after 10 seconds. When you press the “ ” button for the second time the system will shut down and begin cooling. 2. The cooling cycle lasts 5 seconds, the POWER/STANDBY LED will flash red. When the LED lights solid red the pro- jector is in standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has en- tered standby mode. Once in standby mode, simply press “ ” button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP” LED indicator is lit red and if “POWER/STANDBY” indicator flashes red.  The cooling cycle lasts 5 seconds, the POWER/STANDBY LED will flash red. When the LED lights solid red the pro- jector is in standby mode. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator lights up again, please contact your nearest service center for assistance.

Message Power LED Temp_LED Lamp_LED Red Blue Red Red Standby State (Input Power cord) ＊ -- -- -- Power on -- ＊ -- -- Warming Flashing -- -- -- Cooling Down Flashing Flashing -- -- Burn-in ON Flashing Flashing -- -- Burn-in OFF -- -- -- -- Power NG -- -- ＊ ＊ Fan Lock Flashing slow:3s -- CW breakdown Flashing fast:500ms Overheat -- -- ＊ -- LD Overheat -- -- ＊ -- LD Voltage Error -- -- -- ＊ No Light: “--”, ＊Steady light

Adjusting the Projector’s Height The projector is equipped with adjustable feet for adjust- ing the image height position. 1. Locate the foot you want to adjust on the underside of the projector. 2. Turn the adjustable foot counter-clockwise to move it outwards or clockwise to move it inwards. Repeat with the remaining feet as needed. Adjustable Feet Adjustable Ring

To focus the image, slide the focus slide until the image is clear.  XGA series: The projector will focus at distances (lens to wall) from 0.53~0.68 meters  WXGA series: The projector will focus at distances (lens to wall) from 0.49~0.68 meters  1080p series: The projector will focus at distances (lens to wall) from 0.49~0.57 meters Focus Slide

 XGA series: Projection Image Size from 72.1” to 92.5”.  WXGA series: Projection Image Size from 85” to 115”.  1080p series: Projection Image Size from 86.8” to 102.1”. Image center S 96.7 mm H T 1 O 1 W T O 2

XGA (4:3) Wall mount installation measurement chart Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from surface of whiteboard to center of projector mount (T) in mm Distance from top of image to top of interface boss (O1) in mm Distance from top of image to top of projector (O2) in mm 72 1829 1463 1097 371 486.7 257 237 73 1854 1483 1113 377 492.7 260 240 74 1880 1504 1128 384 499.7 263 243 75 1905 1524 1143 391 506.7 265 245 76 1930 1544 1158 398 513.7 268 248 77 1956 1565 1173 404 519.7 271 251 78 1981 1585 1189 411 526.7 273 253 79 2007 1605 1204 418 533.7 276 256 80 2032 1626 1219 425 540.7 279 259 81 2057 1646 1234 431 546.7 281 261 82 2083 1666 1250 438 553.7 284 264 83 2108 1687 1265 445 560.7 287 267 84 2134 1707 1280 452 567.7 290 270 85 2159 1727 1295 458 573.7 292 272 86 2184 1748 1311 465 580.7 295 275 87 2210 1768 1326 472 587.7 298 278 88 2235 1788 1341 479 594.7 300 280 89 2261 1808 1356 485 600.7 303 283 90 2286 1829 1372 492 607.7 306 286 91 2311 1849 1387 499 614.7 308 288 92 2337 1869 1402 506 621.7 311 291 93 2362 1890 1417 512 627.7 314 294 94 2388 1910 1433 519 634.7 317 297 95 2413 1930 1448 526 641.7 319 299 96 2438 1951 1463 533 648.7 322 302 97 2464 1971 1478 539 654.7 325 305

Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from surface of whiteboard to center of projector mount (T) in mm Distance from top of image to top of interface boss (O1) in mm Distance from top of image to top of projector (O2) in mm 85 2159 1831 1144 370 485.7 266 246 86 2184 1852 1158 376 491.7 268 248 87 2210 1874 1171 382 497.7 270 250 88 2235 1895 1185 387 502.7 273 253 89 2261 1917 1198 393 508.7 275 255 90 2286 1939 1212 399 514.7 277 257 91 2311 1960 1225 404 519.7 280 260 92 2337 1982 1239 410 525.7 282 262 93 2362 2003 1252 416 531.7 285 265 94 2388 2025 1265 422 537.7 287 267 95 2413 2046 1279 427 542.7 289 269 96 2438 2068 1292 433 548.7 292 272 97 2464 2089 1306 439 554.7 294 274 98 2489 2111 1319 444 559.7 297 277 99 2515 2132 1333 450 565.7 299 279 100 2540 2154 1346 456 571.7 301 281 101 2565 2175 1360 461 576.7 304 284 102 2591 2197 1373 467 582.7 306 286 103 2616 2219 1387 473 588.7 308 288 104 2642 2240 1400 479 594.7 311 291 105 2667 2262 1414 484 599.7 313 293 106 2692 2283 1427 490 605.7 316 296 107 2718 2305 1440 496 611.7 318 298 108 2743 2326 1454 501 616.7 320 300 109 2769 2348 1467 507 622.7 323 303 110 2794 2369 1481 513 628.7 325 305 111 2819 2391 1494 519 634.7 327 307 112 2845 2412 1508 524 639.7 330 310 113 2870 2434 1521 530 645.7 332 312 114 2896 2455 1535 536 651.7 335 315 115 2921 2477 1548 541 656.7 337 317

Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from surface of whiteboard to center of projector mount (T) in mm Distance from top of image to top of interface boss (O1) in mm Distance from top of image to top of projector (O2) in mm 87 2210 1926 1083 370 485.7 288 268 88 2235 1948 1096 376 491.7 291 271 89 2261 1970 1108 382 497.7 294 274 90 2286 1992 1121 387 502.7 296 276 91 2311 2015 1133 393 508.7 299 279 92 2337 2037 1146 398 513.7 301 281 93 2362 2059 1158 404 519.7 304 284 94 2388 2081 1171 409 524.7 307 287 95 2413 2103 1183 415 530.7 309 289 96 2438 2125 1196 421 536.7 312 292 97 2464 2147 1208 426 541.7 314 294 98 2489 2170 1220 432 547.7 317 297 99 2515 2192 1233 437 552.7 320 300 100 2540 2214 1245 443 558.7 322 302 101 2565 2236 1258 448 563.7 325 305 102 2591 2258 1270 454 569.7 327 307

XGA (4:3) Table top installation measurement chart Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from bottom of image to top of table (O3) in mm 72 1829 1463 1097 234 260 73 1854 1483 1113 240 263 74 1880 1504 1128 247 266 75 1905 1524 1143 254 268 76 1930 1544 1158 261 271 77 1956 1565 1173 267 274 78 1981 1585 1189 274 276 79 2007 1605 1204 281 279 80 2032 1626 1219 288 282 81 2057 1646 1234 294 284 82 2083 1666 1250 301 287 83 2108 1687 1265 308 290 84 2134 1707 1280 315 293 85 2159 1727 1295 321 295 86 2184 1748 1311 328 298 87 2210 1768 1326 335 301 88 2235 1788 1341 342 303 89 2261 1808 1356 348 306 90 2286 1829 1372 355 309 91 2311 1849 1387 362 311 92 2337 1869 1402 369 314 93 2362 1890 1417 375 317 94 2388 1910 1433 382 320 95 2413 1930 1448 389 322 96 2438 1951 1463 396 325 97 2464 1971 1478 402 328 Projector installation measurement chart Table top 97 mm O3 H T1 O3 W 23mm Screen Table Image center

Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from bottom of image to top of table (O3) in mm 85 2159 1831 1144 233 269 86 2184 1852 1158 239 271 87 2210 1874 1171 245 273 88 2235 1895 1185 250 276 89 2261 1917 1198 256 278 90 2286 1939 1212 262 280 91 2311 1960 1225 267 283 92 2337 1982 1239 273 285 93 2362 2003 1252 279 288 94 2388 2025 1265 285 290 95 2413 2046 1279 290 292 96 2438 2068 1292 296 295 97 2464 2089 1306 302 297 98 2489 2111 1319 307 300 99 2515 2132 1333 313 302 100 2540 2154 1346 319 304 101 2565 2175 1360 324 307 102 2591 2197 1373 330 309 103 2616 2219 1387 336 311 104 2642 2240 1400 342 314 105 2667 2262 1414 347 316 106 2692 2283 1427 353 319 107 2718 2305 1440 359 321 108 2743 2326 1454 364 323 109 2769 2348 1467 370 326 110 2794 2369 1481 376 328 111 2819 2391 1494 382 330 112 2845 2412 1508 387 333 113 2870 2434 1521 393 335 114 2896 2455 1535 399 338 115 2921 2477 1548 404 340 1080P (16:9) Table top installation measurement chart Diagonal image size (S) in inch Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm Distance from bottom of image to top of table (O3) in mm 87 2210 1926 1083 233 291 88 2235 1948 1096 239 294 89 2261 1970 1108 245 297 90 2286 1992 1121 250 299 91 2311 2015 1133 256 302 92 2337 2037 1146 261 304 93 2362 2059 1158 267 307 94 2388 2081 1171 272 310 95 2413 2103 1183 278 312 96 2438 2125 1196 284 315 97 2464 2147 1208 289 317 98 2489 2170 1220 295 320 99 2515 2192 1233 300 323 100 2540 2214 1245 306 325 101 2565 2236 1258 311 328 102 2591 2258 1270 317 330

Control Panel Using the Control Panel POWER Refer to the “Power On/Off the Projector” section. Enter Press “Enter” to confirm your item selection. INPUT Press “INPUT” to select an input signal. MENU Press “MENU” to launch the on-screen display (OSD) menu. To exit OSD, press “MENU” again. Four Directional Keys Use ▲▼◄► to select items or make adjustments to your selection. LAMP LED Indicates lamp status. TEMP LED Indicates temperature status. ON/STANDBY LED Indicates power status.

Infrared Transmitter Sends signals to the projector. LED LED Indicator. Power Refer to the “Power On/Off the Projector” section. Exit Press “Exit” to close the OSD menu. Zoom in Zoom in the projector display. Reset Return the adjustments and settings to the factory default values. Zoom out Zoom out the projector display. Enter Confirm your item selection. Source Press “Source” to select an input signal. Auto Automatically synchronizes the projector to the input source. Four Directional Select Keys Use ▲▼◄► to select items or make adjustments to your selection. Keystone +/- Adjust image distortion caused by tilting the projector. Volume +/- Adjust to increase / decrease the volume. Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, press “Menu” again. Blank Turns off video and audio. Press again to turn on video and audio.

Image Select the display mode from Bright, PC, Movie, Game, and User. Aspect Select aspect ratio. VGA1 Select VGA1 video input. Freeze Pause the screen image. Press again to resume the screen image. HDMI1 Select HDMI1 video input. VGA2 Select the VGA2 video input. Video Select the Composite video input. HDMI2 Select HDMI2 video input.

The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When the OSD menu is displayed, use the ▲▼ keys to select any item in the main menu. While making a selection on a particular page, press the ► or “Enter” key to enter sub menu. 3. Use the ▲▼ keys to select the desired item and adjust the settings using the ◄► keys. 4. Select the next item to be adjusted in the sub menu and adjust as described above. 5. Press “Enter” to confirm, and the screen will return to the main menu. 6. To exit, press “Menu” again. The OSD menu will close and the projector will automatically save the new settings. Main Menu Settings Sub Menu

ages. Use the ◄ or ► button to select the item. Bright: For brightness optimization.  PC: For meeting presentation.  Movie: For playing video content.  Game: For game content.  User: Stored user settings.  Wall Color Use this function to obtain an optimized screen image according to the wall color. You can select from “White”, “Light Yellow”, “Light Blue”, “Pink”, and “Dark Green”. Brightness Adjust the brightness of the image. Press the ◄ button to darken image.  Press the ► button to brighten image.  Contrast The Contrast controls the difference between the lightest and dark- est parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the ◄ button to decrease the contrast.  Press the ► button to increase the contrast. 

Press the ◄ button to decrease the sharpness.  Press the ► button to increase the sharpness.  Saturation Adjust a Composite video image from black and white to full color saturation. Press the ◄ button to decrease the amount of saturation in the  image. Press the ► button to increase the amount of saturation in the  image. Hue Adjust the color balance of red and green. Press the ◄ button to increase the amount of green in the im-  age. Press the ► button to increase the amount of red in the image.  Gamma Adjusts the gamma value to get better contrast. Color Temp Adjusts color temperature. At higher temperature the screen looks more blue, at lower temperature the screen looks more red. Color Settings Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Yellow colors. �“Sharpness”, “Sat- uration” and “Hue” functions are only supported under video mode.

 screen coverage. 4:3: The image will be scaled to fit the screen using a 4:3 aspect  ratio. 16:9: The image will be scaled to fit the screen using a 16:9  aspect ratio. 16:10: The image will be scaled to fit the screen using a 16:10  aspect ratio. Phase Synchronize the signal timing with an analog graphics card. If the image appears to be unstable or flickers, use this function to cor- rect it. Clock Adjust to achieve an optimal image when there is vertical flicker from an analog graphics card. H. Position Press the ◄ button to move the image left.  Press the ► button to move the image right.  �“H. Position” and “V. Position” rang- es will depend on input source.

H. Keystone are not adjustable under 4 corners adjustment mode is on. V. Position Press the ◄ button to move the image down.  Press the ► button to move the image up.  Digital Zoom Press the ◄ button to reduce the size of an image.  Press the ► button to magnify an image on the projection  screen. Geometric Correction V Keystone: Press the ◄ or ► button to adjust image distortion  vertically. If the image looks trapezoidal, this option can help make the image rectangular. H Keystone: Press the ◄ or ► button to adjust image distortion  horizontally. If the image looks trapezoidal, this option can help make the image rectangular. Grid Color: Use this function to change the color of 4 corners  background grid. You can select from “White”, “Green”, “Red”, and “Purple”. Adjust the display area using the 4 Corners adjustment. Step 1: Select "4 Corners On/Off" and turn it On. Step 2: Select “4 Corners Adjust” and a grid will be displayed. Step 3: Press ▲▼ and ◄► to select a corner. Step 4: Press “Enter” and the color of the selected corner will change from blue to red.

Step 6: Press "Menu" and select another corner to adjust. Step 7: Press "Menu" and select another corner to adjust. Step 8: Select "4 Corners Reset" to restore the original settings. Orientation Front: The image is projected straight on the screen.  Front Ceiling: This is the default selection. When selected, the  image will turn upside down. Rear: When selected, the image will appear reversed.  Rear Ceiling: When selected, the image will appear reversed in  upside down position.

keys to select the preferred language then press Enter to finalize the selection. OSD Position Select location of the Menu on the display. Closed Caption Use this function to open the Closed Caption menu. Select be- tween Off, CC1, CC2, CC3, and CC4. VGA Out (Standby) Select “On” to make VGA OUT available during standby. Select “Off” to make VGA OUT unavailable during standby.

by. Select “On” to make the connection available during standby. When in standby the Web Management is not available. The pro- jector must be turned on with a magic packet. VGA-2 (Function) Input: Select “Input” to configure VGA2 as a VGA video input.  Output: Select “Output” to configure VGA2 as a VGA output.  Test Pattern Display a test pattern. Factory Reset Select “Yes” to return all parameters to factory default.

 Select “Off” to disable the speaker.  Line Out Select “On” to enable the line out function.  Select “Off” to disable the line out function.  Microphone Select “On” to enable the microphone.  Select “Off” to disable the microphone.  Mute Select “On” to turn mute on.  Select “Off” to turn mute off.  Volume Press the ◄ button to decrease the volume.  Press the ► button to increase the volume.  Microphone Volume Press the ◄ button to decrease the microphone volume.  Press the ► button to increase the microphone volume. 

 signal is lost. Off: The projector will only search the current input connection.  Input Press ► button to enable/disable input sources. The projector will not search for inputs that are not selected. Auto Power Off (Min) Sets the countdown timer interval. The countdown timer will start when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Laser Settings Refer to the “Options/Laser Settings” section on page 38.

 using the projector at altitudes above 2500 feet/762 meters or higher. Off: The built-in fans automatically run at a variable speed ac-  cording to the internal temperature. Filter Alarm (Hours) Filters Remind (Hour): Set the filter reminder time.  Filter Reminder Reset: Select “Yes” to reset the dust filter hour  counter after replacing or cleaning the dust filter. Information Display the projector information for model name, SNID, source, resolution, software version, and aspect ratio on the screen.

Displays the hours that the laser has been on in Normal Mode. Hours Used (ECO) Displays the hours that the laser has been on in ECO Mode. Laser Power Mode Normal: Normal mode.  ECO: Select to lower laser power. This dims the projected dis-  play and extends laser life.

 detected the 3D setting is set automatically. Select “On” to enable the 3D function.  Select “Off” to disable the 3D function.  3D Invert If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute “Invert” to get best match of left/ right image sequence. 3D Format Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side”, “Top and Bottom”, “Frame Sequential”, and “Field Sequential”. 1080p@24 Select 96 or 144Hz refresh rate to match the DLPLink 3D glasses being used. �“Frame Sequen- tial” is supported on input signals from the VGA, HDMI, and Composite video connectors. �“Frame Pack- ing” / “Side-by- Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input signals.

Color Temp Use to manually adjust the color temperature of blended projec- tors. Blending application Example of system architecture Laptop, Switch and Camera is for image calibration only  Laptop Source: Image source  Blending Box  Multiple projectors (two in this example)  For more details, please check the Blending Box HW/SW speci-  fications Meeting Room PC PC Network Switch Blending Box Calibration Camera

DHCP Use to configure the DHCP setting. On: Select “On” to obtain an IP address automatically from the  network. Off: Select “Off” to manually assign a fixed IP, Subnet Mask,  Gateway, and DNS. IP Address Displays the projector IP address. Subnet Mask Displays the projector Subnet Mask number. Gateway Displays the network Gateway address. DNS Displays the DNS address. MAC Address Displays the projector MAC address.

Projector Name Displays the projector name. Location Displays the projector location. Contact Displays the contact information.

You can control the projector remotely via a web browser on your controlling device. You can connect directly or via a network. 1. When making a LAN connection from your network to the projector: Step 1: Please select DHCP On. Step 2: Find the “IP Address” of the projector in the LAN menu. Connect to LAN with DHCP server Connect to PC directly Step 3: Open your web browser and type in the IP address in the URL and press “Enter”. Then you can Control the projector over a network.

projector Step 1: Setup the WiFi connection Insert a WiFi dongle (optional SP-WIFIUSB-2) in the USB-A socket in the projector.  Go to Input → Multimedia → Settings → WiFi.  Define SSID/AP name and password in the AP settings menu. Note! The password  must be minimum 8 characters. Press exit on the remote control to exit the virtual keyboard to be able to save the settings. You are now ready to connect your wireless device directly to the projector (AP  mode). If you want to connect via a WiFi network (client mode) you must connect the projec-  tor and the wireless device to a common WiFi network and ensure that the network allows connected units to see each other. Turn ON the AP list to see available wireless networks (Client mode only).  Connect the projector to the desired wireless network (Client mode only).  Exit Settings  Step 2: Connect to the projector (AP Mode only) Go to Input → Multimedia → Mobile/Tablet or Laptop (depending on device)  On your mobile/tablet or laptop: Open the list of available wireless networks and con-  nect to the listed AP using the displayed password AP Mode Device: Tablet Smart Phone Laptop PC Device: Tablet/Smart Phone/Laptop/PC Client Mode

Open your web browser and type in the IP address 192.168.111.1 in the URL then press “Enter”. Projector Information Use to get Projector Information and select different languages for Web Management.

Wi-Fi Use to download and install EZ View for different platforms and operating systems.

Use to control the projector and get status information. When the projector is in standby Web Management is not available due to regulations on power usage. To turn the projector back on over the Ethernet connection you must use a magic packet.

Password Setting Use to set the password for access to web management. Crestron control: See “Crestron“ section on how to control the projector via Crestron flash UI.

tablet, laptop, desktop, etc. and have it displayed on a projector. There is a limitation to what you can do via the app whilst using the software has no other limitation than a maximum resolution of XGA (1024x768). EZ View APP features: Supports viewing local photos and documents (PDF and Office files).  Supports viewing local videos.  Displays Web pages.  View image data from a camera.  Supports Web Video like Youtube  Supports Dropbox  Annotate over photos, documents and Web pages  Screen Display via EZ View APP or software Step 1: Install the EZ View tool on your device according to the device operating system. AP Mode Device: Tablet Smart Phone Laptop PC Device: Tablet/Smart Phone/Laptop/PC Client Mode

on PC or Laptop, on tablet or smart phone. EZ View on PC or Laptop Step 1: Connect your PC/Laptop to the projector (AP mode) or connect both the PC/Laptop and the projector to a common WiFi or LAN network (Client mode) Step 2: Select the Multimedia video source on the projector and select Laptop (AP mode) or Desktop (Client mode) then start EZ View on your PC or laptop by clicking on the icon below. Step 3: Click Auto Search or enter the IP address then click Start

1. Mirror Mode Display 2. Extension Mode Display 3. Link to Web management page (AP mode and client mode via LAN network 4. only) Exit 5. Display Mode : Video or Graphic 6. Compatible Mode 7. Audio On/Off 8. Media Streaming mode for playing video application 9. Start playing video 10. Stop playing video 11. Select video streaming file 12. EZ View on Tablet or Smart phone Step 1: Connect your mobile/tablet to the projector (AP mode) or connect both the mobile/ tablet and the projector to a common WiFi or LAN network (Client mode). Step 2: Select the Multimedia video source on the projector and select Mobile/Tablet then start EZ View on your phone or tablet by clicking on the icon below. Step 3: Select the projector from the list by name.

Step 5: Select the function to stream to the projector via the EZ View APP.

Character length limitations for entering Projector Information. Category Item Input-Length (characters) Crestron Control IP Address 15 IP ID 2 Port 5 Projector Projector Name 10 Location 9 Assigned To 9 Network Configuration DHCP (Enabled) (N/A) IP Address 15 Subnet Mask 15 Default Gateway 15 DNS Server 15 User Password Enabled (N/A) New Password 15 Confirm 15 Admin Password Enabled (N/A) New Password 15 Confirm 15

Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including the projector’s online status, system power, lamp life, network settings and hardware faults, plus any custom attribute as defined by the Administrator. The Administrator can add, delete, or edit room information, contact information and events, which are logged automatically by the software for all users. (Example of user interface below) 1. Main Screen 2. Edit Room �Crestron Room- View’s function is set according to the products’ models and specifications.

4. Edit Event For further information, please visit: http://www.crestron.com & www.crestron.com/getroomview.

This projector supports two methods to project media files (photos, videos, music, documents) stored on following devices: a. via Wireless dongle (see above) - wirelessly access the media files stored on your mobile phone, tablet PC, notebook, or desktop. b. via USB flash drive - directly access the media files stored on the device. How to access Multimedia mode 1. Plug a USB flash drive into the projector’s USB-A connector. 2. Turn on the projector. E62405SP R 3. Press “INPUT” on the remote control or on the control panel and press the ▲▼ keys to select “Multimedia” and the “Enter” key to confirm.

To access the media files stored on your USB flash drive, do the following: Supported File Formats Multimedia Category File Formats Photo BMP, JPG Music MP3, WMA Video AVI, MOV, MP4, RM, RMVB, DAT, MPG, ISO, TS, MKV, VOB, and WMV Document WORD, EXCEL, PPT, PDF 1. In the Multimedia menu, select USB Disk. 2. Use the ▲▼ keys to select the file category and press the “Enter” key.

“Enter” key to confirm. Configuring Multimedia Settings To change the settings, do the following: 1. In the Multimedia menu, select Settings. 2. Use the ▲▼ keys to select the desired menu option and press the “Enter” key to enter the submenu.

 update firmware. Video: Select this option to change the display ratio and set  the repeat mode. Photo: Select this option to change the display ratio, slide-  show pattern, and slideshow duration. Music: Select this option to set the repeat mode .  WiFi: Select this option to configure the Wi-Fi connection.  3. Use the ▲▼ keys to select the adjust/select the setting and press the “Enter” key to confirm.

Modes Resolution V. Frequency [Hz] H. Frequency [KHz] VGA 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 IBM 720x400 70 31.5 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 Apple, MAC II 832x624 75 49.1 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 Apple, MAC II 1152x870 75 68.7 SXGA 1280x1024 60 64.0 1280x1024 72 77.0 1280x1024 75 80.0 QuadVGA 1280x960 60 60.0 1280x960 75 75.2 SXGA+ 1400x1050 60 65.3 UXGA 1600x1200 60 75.0 

Modes Resolution V. Frequency [Hz] H. Frequency [KHz] WXGA 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 UWHD 1920x720 60 44.4 Full HD 1920x1080 60 67.5 WUXGA with reduced blanking 1920x1200 60(RB) 74 c. Component signal Modes Resolution V. Frequency [Hz] H. Frequency [KHz] 480i 720x480 (1440x480) 59.94(29.97) 15.7 576i 720x576 (1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 1280x720 50 37.5 1080i 1920x1080 60(30) 33.8 1920x1080 50(25) 28.1 1080p 1920x1080 23.98/24 27.0 1920x1080 60 67.5 1920x1080 50 56.3

Modes Resolution V. Frequency [Hz] H. Frequency [KHz] VGA 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 IBM 720x400 70 31.5 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 Apple, MAC II 832x624 75 49.1 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 Apple, MAC II 1152x870 75 68.7 SXGA 1280x1024 60 64.0 1280x1024 72 77.0 1280x1024 75 80.0 QuadVGA 1280x960 60 60.0 1280x960 75 75.2 SXGA+ 1400x1050 60 65.3 UXGA 1600x1200 60 75.0 Full HD 1920x1080 60 67.5 WUXGA with reduced blanking 1920x1200 60 (RB) 74 

Modes Resolution V. Frequency [Hz] H. Frequency [KHz] WXGA 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 UWHD 1920x720 60 44.4 c. Video signal Modes Resolution V. Frequency [Hz] H. Frequency [KHz] 480p 640x480 59.94/60 31.5 480i 720x480 (1440x480) 59.94(29.97) 15.7 576i 720x576 (1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 1280x720 50 37.5 1080i 1920x1080 60(30) 33.8 1920x1080 50(25) 28.1 1080p 1920x1080 23.98/24 27.0 1920x1080 60 67.5 1920x1080 50 56.3 d. HDMI 1.4a mandatory 3D timing- Video Signal Modes Resolution V. Frequency [Hz] H. Frequency [KHz] Frame Packing 720p 50 31.5 720p 59.94/60 15.7 1080p 23.98/24 15.6 Side-by- Side(Half) 1080i 50 31.5 1080i 59.94/60 31.3 Top and Bottom 720p 50 45.0 720p 59.94/60 37.5 1080p 23.98/24 33.8

Items Method Communication Method Asynchronous Communication Bits per seconds 19200 Data bits 8 bits Parity None Stop bits 1 Flow control None RS232 Signals Connection RS232 Commands and Protocol Function List �RS232 shell is grounded. Computer COM Port (D-Sub 9pin connector) Projector COM Port (D-Sub 9pin connector)   SGND SGND

Emulate Remote #0001 n 1 : Up 2 : Left 3 : Right 4 : Down 5 : Menu 6 : Source 7 : Keystone+ 8 : Keystone- 9 : Volume+ 10 : Volume- Resync #0002 1 VGA only AV Mute (Blank) #0003 n 0 : Off 1 : On Freeze #0004 n 0 : Unfreeze 1 : Freeze Input Source #0005 n 1 : VGA 1 2 : VGA 2 3 : HDMI 1 4 : HDMI 2 5 : Video 6 : Multimedia Color Mode #0010 n 1 : Bright 2 : PC 3 : Movie 4 : Game 5 : User Brightness #0011 n 0~100 Contrast #0012 n 0~100 Sharpness #0013 n 0~31 Video only 

2 : 4:3 3 : 16:9 4 : 16:10 / Ultra Wide Zoom #0021 n 0 : Zoom- 1 : Zoom+ Keystone #0022 n -40~40 Orientation #0023 n 1 : Front 2 : Rear 3 : Front Ceiling 4 : Rear Ceiling Language #0030 n 1 : English 2 : German 3 : Swedish 4 : French 5 : Arabic 6 : Dutch 7 : Norwegian 8 : Danish 9 : Simplified Chinese 10 : Polish 11 : Korean 12 : Russian 13 : Spanish 14 : Traditional Chinese 15 : Italian 16 : Portuguese 17 : Turkish 18 : Japanese Menu Location #0031 n 1 : Top Left 2 : Top Right 3 : Center 4 : Bottom Left 5 : Bottom Right Reset #0032 1 Mute #0040 n 0 : Off 1 : On Volume #0041 n 0~30

(min) #0050 n 0~120 Step = 5 High Altitude #0051 n 0 : Off 1 : On Read Commands Color Mode Read #00110 1 Okn n : 1/2/3/4/5 = Bright / PC / Movie / Game / User Aspect Ratio Read #00120 1 Okn n : 1/2/3/4 = Auto / 4:3 / 16:9 / 16:10 (Ultra Wide) Input Source (curr. src) #00160 1 Okn n : 0/1/2/3/4/5/6 = None / VGA1 / VGA2 / HDMI1 / HDMI2 / Video / Multimedia Sofware Version #00161 1 Okddd ddd : FW version Information #00162 1 Okabbbbccdddee a : Power Status / b : LD Hour / c : Input Source / d : Firmware Version / e : Color mode

damage resulting from incorrect installation will void the warranty. Ceiling Mount Installation 1. To prevent damage to your projector, please use the InFocus ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications:  Screw type: M4*4  Minimum screw length: 10mm Warning: 1. If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate. 2. Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector. 3. Avoid installing the projector near a heat source. 96.72 382.44 130.00 24.50 15.00 111.26 123.26 310.17 88.00 105.71 96.72

This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector.

the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operating Conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 2014/30/EU • Low Voltage Directive 2014/35/ EU • (RED) 2014/53/EU (if product has RF function)

and CFR 1040.10 and 1040.11. - Class 2 laser product, Do Not Stare Into Beam. - IEC 60825-1:2014 Class 1 laser product/risk group 0 IEC 62471-5:2015. - This projector has a built-in Class 4 laser module. Disassembly or modification is very dangerous and should never be attempted. - Any operation or adjustment not specifically instructed by the user’s guide cre- ates the risk of hazardous laser radiation exposure. - Do not open or disassemble the projector as this may cause damage from exposure to laser radiation. - Do not stare into the beam when the projector is on. The bright light may result in permanent eye damage. - Failure to follow the control adjustment or operation procedures may cause damage from exposure to laser radiation. - Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning precautions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits in Class 2. WARNING Safety notice