Honeywell CK75 Quick Start Manual

Quick Start Guide CK75-A6-EN-QS-01 Rev (a) 2/17 Preliminary Draft, Not for Release Please Review 2/1/17

Make sure that your shipping box contains these items: • CK75 mobile computer (Model CK75LAN) • Rechargeable 3.7 V, Lithium-ion battery • Product Documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ memory cards with the computer for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. Preliminary Draft, Not for Release Please Review 2/1/17

Speaker Touch Panel Preliminary Draft, Not for Release Please Review 2/1/17

Please Review 2/1/17

Detach the hand strap to access to the back of the computer. Preliminary Draft, Not for Release Please Review 2/1/17

Note: Format the microSD card before initial use. 1 2 3 4 5 Preliminary Draft, Not for Release Please Review 2/1/17

The CK75 mobile computer ships with a Lithium-ion 3.7 V, 5200 mAH (19.24 Wh) battery manufactured for Honeywell Interna- tional Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty. Preliminary Draft, Not for Release Please Review 2/1/17

The CK75 mobile computer ships with a partially charged battery. Charge the battery with a 70 Series charging device for a minimum of 6 hours. Using the computer while charging the battery increases the time required to reach a full charge. If the terminal is drawing more current than supplied by the charging source, charging will not take place. For additional information, see the user guide. CK75 mobile computers are designed for use with the following charging accessories: DX1 Desktop Dock, DX2 Dual Dock, and DX4 Quad Dock and a power supply. We recommend the use of Honeywell peripherals, power cables and power adapters. Use of any non- Honeywell accessories or power adapters may cause damage not covered by the warranty. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Preliminary Draft, Not for Release Please Review 2/1/17

The computer automatically turns on when you install the battery pack. Note: You should always power off the computer before removing the battery. To turn the computer off: 1. Press and hold the Power button until the options menu appears. 2. Touch Power Off. 3. When prompted to shut down the phone, touch OK. Note: To turn the computer back on, press and release the Power button. Sleep Mode (Suspend Mode) Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the lock toward the top of the display to unlock the computer. Note: To adjust the time out limit, touch All Apps > Settings > Display > Sleep. Preliminary Draft, Not for Release Please Review 2/1/17

To learn how to customize the Home screen, see the user guide. Search Bar Home Screen Panel Notification / Status Bar Touch to initiate a voice search or command. Touch the All Apps icon to access apps and settings. Favorites Tray Navigation Buttons Preliminary Draft, Not for Release Please Review 2/1/17

To learn more about how to use the keypad for your computer model, see the user guide. To change the default button function of the scan button, use the Key remap option under Settings. For additional information on how to remap a button function, see the user guide. Buttons Description Function Back Return to the previous screen. Recent Apps View and switch between recently used apps. Home Return to Home screen. Volume Raises or lowers the volume of the speaker. Scan Trigger the scanner. Preliminary Draft, Not for Release Please Review 2/1/17

Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. 1. Touch All Apps > Demos > Scan Demo. 2. Point the computer at the bar code. 3. Touch and hold Scan on the touch screen or press and hold the Scan button. Center the aiming beam over the bar code. The decode results appear on the screen. Preliminary Draft, Not for Release Please Review 2/1/17

1. Touch on the Home Screen. The camera application opens on the computer. 2. Swipe from the left side of the screen to select either single photo mode or video mode . 3. Point the camera lens at the object you want to capture. The camera lens is located on the back of the computer. 4. Touch to capture a single photo or touch to start recording video. Touch to stop recording video. Preliminary Draft, Not for Release Please Review 2/1/17

1. Connect the CK75 to your computer using a USB charge/ communication accessory. 2. By default, the CK75 is in USB charging only mode. To enable file transfers, swipe down from the top of the Home screen to access the Notifications panel. 3. Touch the USB notification, and then select either File transfers (MTP) or Photo transfer (PTP). 4. Depending on the Windows® operating system, either open File Explorer or Windows Explorer. 5. Under Computer, click on CX75 NCF. 6. You can now copy, delete and/or move files or folders between the computer and CK75 or a microSD card installed in the CK75 as you would with any other storage drive (e.g., cut and paste or drag and drop). Preliminary Draft, Not for Release Please Review 2/1/17

You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Reboot and then OK. To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: If you try to restart the computer and still experience issues, you may need to see the user guide for information on how to perform a Factory Reset (Clean Boot). Support To search our knowledge base for a solution or log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com. User Documentation For the user guide and other documentation, go to www.honeywellaidc.com. Preliminary Draft, Not for Release Please Review 2/1/17

click Get Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Trademarks Android and Google and other marks are trademarks of Google Inc. Windows, File Explorer, and Windows Explorer are either registered trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright © 2017 Honeywell International Inc. All rights reserved. Preliminary Draft, Not for Release Please Review 2/1/17