Netis DL4305D Quick Installation Manual
Text of the manual
1. Hardware Installation
Step 1: Connect the ADSL Line.
Method one: Plug one end of the twisted‐pair ADSL cable into
the ADSL LINE port on the rear panel of the router, and insert
the other end into the wall socket. Method two: You can use a
separate splitter. The external splitter has three ports: •
Line: Connect to the wall jack • Phone: Connect to the
phone sets • Modem: Connect to the ADSL LINE port of
the router
Step 2: Connect the Ethernet cable. Attach one end of a network
cable to your computer's Ethernet port or a regular hub/switch port,
and the other end to the LAN port on the router.
Step 3: Power on the computers and LAN devices.
Step 4: Attach the power adapter. Connect the power adapter to the
power connector on the rear of the device and plug in the adapter to
There is no successful PPP connection or the
Router works on Bridge mode.
Flash
There is wireless data being transmitted.
On
The wireless function is enabled but no data is
being transmitted.
WLAN
Off
The wireless function is disabled.
Flash
Data is being transferred over the 1‐4 (LAN) port.
On
There is a successful connection on the
corresponding 1‐4 (LAN) port but no activity.
LAN(1‐4)
Off
There is no connection on the corresponding 1‐4
(LAN) port or the connection is abnormal.
2. Configure PC
ForWindows 7 or Windows Vista as below.
Step 1: Click
, then select the Open Network and Sharing
Center.
Figure 2
Step 2: Click the Change adapter settings.
Figure 3
Step 3: Click Local Area Connection with the right button of your
mouse. Then select Properties.
