LG GR-B214EPQC Owner's Manual

where it is easy to use. 2. Avoid placing the unit near heat sources, direct sunlight or moisture. 3. To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws counterclockwise ( ) to raise the unit, clockwise ( ) to lower it. 4. Clean your freezer thoroughly and wipe off all d ...

for Freezer Compartment 12 Operation Temperature Control Your freezer has controls that let you regulate the temperature in the freezer compartments. Display Panel For Temperature Control Adjusting the temperatures and functions ...

• The defrosting water flows down to the evaporating tray and is evaporated automatically. Ice Making • Fill water in ice making tray. Only fill with enough water to maintain individual blocks, if over filled blocks will not separate properly and water may spill into ice bin clumping ice together. • Ice will be dropped into the ice storage bin by rotating ice separation handle of ice making compartment. Note • Rotating the ice separation handle before ice is fully frozen may cause the remaining water to drop into the ice ...

w CAUTION • Do not store food which goes bad easily at low temperature, such as banana, and melon. • Allow hot food to cool prior to storing. Placing hot food in the freezer could spoil other food, and lead to higher electric bills. • When storing the food, use a container with a lid. This prevents moisture from evaporating, and helps food to keep its taste and nutrients. • Do not block air vents with food. Smooth circulation of cold air keeps freezer temperature even. • Do not open the door frequently. Opening the door lets warm air enter the freezer, ...

enclosure or in the built-in structure, clear of obstruction. w Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. w Do not damage the refrigerant circuit. w Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. w The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. When disposal, please consult with a ...

where it is easy to use. 2. Avoid placing the unit near heat sources, direct sunlight or moisture. 3. To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws counterclockwise ( ) to raise the unit, clockwise ( ) to lower it. 4. Clean your freezer thoroughly and wipe off all d ...