Melitta Caffeo Bistro Operating Instructions Manual

D-32372 Minden NEDERLANDS FRANÇAIS ENGLISH DEUTSCH ESPAÑOL SLOVENSKY ČESKY Bedienungsanleitung Operating Instructions Guide d’utilisation Gebruiksaanwijzing Manual de Instrucciones Návod k obsluze Návod na použitie

We would like to welcome you as a coffee lover and enthusiast of Melitta® CAFFEO®. With this Melitta® CAFFEO® quality product you will experience many special coffee moments. Enjoy your favourite coffee specialities with all your senses and indulge yourself. With the Perfect Cappuccino milk frother, you can prepare fantastic milk froth for various coffee specialities, and with the two- chamber bean container Bean Select, you can select from two different bean types, ensuring unique coffee enjoyment. Please read these operating instructions carefully and thoroughly and keep them in a safe place so that you and your guests can enjoy the Melitta® CAFFEO® for a long time to come. Should you require more information or if you have any questions on this product, please contact us directly or visit us on the Internet at www.melitta.de. We hope you enjoy your new fully automatic coffee maker. Your Melitta® CAFFEO® team ® Registered trademark of a company of the Melitta Group

1 Information about these operating instructions .....................................42 1.1 Symbols in the text of these operating instructions .................................. 42 1.2 Intended use.............................................................................................43 1.3 Non-intended use .....................................................................................43 2 General safety instructions ...................................................................44 3 Appliance description ............................................................................45 3.1 Legend for Figure A ..................................................................................45 3.2 Legend for Figure B..................................................................................45 3.3 Display ......................................................................................................46 4 Starting up.............................................................................................47 4.1 Placement ................................................................................................47 4.2 Connection ...............................................................................................48 4.3 Filling the bean container .........................................................................48 4.4 Filling the water tank ................................................................................49 4.5 Switching on for the first time ................................................................... 49 4.6 Adjusting the coffee strength .................................................................... 50 4.7 Adjusting the dispensed quantity.............................................................. 50 5 Switching on and off ..............................................................................51 5.1 Switching on the appliance....................................................................... 51 5.2 Switching off the appliance ....................................................................... 51 6 Inserting the Melitta® Claris® water filter ................................................52 7 Preparing espresso or café crème ........................................................53 7.1 Preparing one cup of espresso or café crème ......................................... 53 7.2 Preparing two cups of espresso or café crème ........................................ 53 7.3 Preparing espresso or café crème with ground coffee ............................. 54 8 Preparing milk froth ...............................................................................55 9 Preparing hot water...............................................................................56

10.1 Adjusting the water hardness ................................................................... 57 10.2 Setting the energy-saving mode............................................................... 58 10.3 Setting the stand-by mode .......................................................................59 10.4 Adjusting the brewing temperature........................................................... 60 10.5 Resetting the appliance to the default settings......................................... 61 10.6 Adjusting grinding fineness ...................................................................... 62 11 Care and maintenance..........................................................................63 11.1 General cleaning ......................................................................................63 11.2 Cleaning the Perfect Cappuccino ............................................................. 63 11.3 Cleaning the brewing unit .........................................................................64 11.4 Integrated cleaning programme ............................................................... 65 11.5 Integrated descaling programme.............................................................. 68 11.6 Descaling the water tank ..........................................................................71 12 Transport and disposal .........................................................................72 12.1 Preparation for transport, protection against freezing and measures for longer periods of non-use ................................................................... 72 13 Troubleshooting ....................................................................................74

For a clearer overview, unfold the fold-out pages on the front and back of these operating instructions. 1.1 Symbols in the text of these operating instructions The symbols in these operating instructions indicate specific hazards associated with handling your Melitta® CAFFEO®, or provide useful tips. Warning! Sections with this symbol contain information for your safety and point to possible accident and injury hazards. Caution! Sections with this symbol contain information about incorrect operation that should be avoided and point to possible material damage hazards. Note Sections with this symbol contain valuable additional information for operating your Melitta® CAFFEO®.

specialities, for heating water as well as for heating milk outside of the appliance. Proper use means: • that you carefully read, understand, and comply with the operating instructions. • that you especially comply with the safety instructions. • that you use the Melitta® CAFFEO® within the operating conditions specified in these operating instructions. 1.3 Non-intended use Non-intended use is defined as using the Melitta® CAFFEO® in a manner that differs from the use described in these operating instructions. Warning! Non-intended use can lead to injury or scalding with hot water or steam. Note The manufacturer bears no liability for damage that is attributed to non- intended use.

Please carefully read the following instructions all the way through. Failure to comply with the instructions can affect your own safety and the safety of the appliance. Warning! – Among other things, keep the following objects out of the reach of children: packaging materials, small parts. – All persons using the appliance must be familiar with its operation in advance, and they must be instructed in the possible hazards associated with the appliance. – Never allow children to use the appliance or to play near the appliance unsupervised. – The appliance is not designed to be used by persons (including children) with restricted physical, sensory, or mental capabilities or with a lack of experience and/or knowledge unless they are supervised by a person who is responsible for their safety and have received instructions from this supervising person in how the appliance should be used. – Only use this appliance if it is in faultless condition. – Never attempt to repair the appliance yourself. If repairs are necessary, contact the Melitta® Service Hotline only. – Do not make any alterations in or on the appliance, on its components or on the supplied accessories. – Never immerse the appliance in water. – Never touch hot appliance surfaces. – Never reach into the interior of the appliance when it is in operation. – This appliance is intended for home use and in similar settings, such as: Employee kitchens in stores, offices and other commercial areas; In agricultural facilities; By customers at hotels, motels and other housing facilities; At bed and breakfasts. – Comply also with the safety instructions in the other sections of these operating instructions.

Fig. number Explanation 1 Drip tray with cup plate and coffee grounds container (internal) 2 "Perfect Cappuccino" milk frother 3 Water tank 4 Button for coffee strength 5 Button for steam dispensing 6 Valve switch for steam and hot water dispensing 7 Display 8 Two-chamber bean container „Bean Select“ 9 Tilt lever for "Bean Select" bean container 10 Ground coffee chute with lid 11 ON /OFF button 12 Coffee quantity regulator 13 Button for one-cup dispensing 14 Button for two-cup dispensing 15 Height-adjustable outlet 16 Water level indicator float for the drip tray 3.2 Legend for Figure B Fig. number Explanation 17 Power cable 18 Brewing unit and identification label (behind the cover) 19 Grinding fineness adjustment 20 Power switch

reached Open valve Flashing Valve open Water tank Illuminated Fill the water tank Ground coffee chute Flashing Lid of the ground coffee chute is open Illuminated Ground coffee dispenses upon pressing the single-cup dispensing button Coffee strength Illuminated 1 Bean: mild 2 Beans: normal 3 Beans: strong 4 Beans: very strong Flashing Fill bean container; flashing stops after dispensing the next coffee. Cleaning Illuminated Clean appliance Flashing Integrated cleaning programme is running Drip tray and coffee grounds container Illuminated Empty drip tray and coffee grounds container Flashing Insert drip tray and coffee grounds container Descaling Illuminated Descaling appliance Flashing Integrated descaling programme is running

When you have completed these steps, the appliance is ready for operation. You can now prepare coffee. We recommend pouring away the first two cups of coffee after the first start up. 4.1 Placement • Place the appliance on a stable, level, and dry surface. Make sure that there is a distance of about 10 cm to the wall and other surrounding objects. Caution! – Never place the appliance on hot surfaces or in damp areas. – Do not transport or store the appliance in vehicles or rooms at low temperatures, as the remaining water could freeze or condense and thereby damage the appliance. Follow the instructions on page 72. • The coffee grounds container is located in the drip tray. Please make sure that the drip tray is pushed into the appliance all the way to the stop. Notes – Keep the packaging material, including hard foam elements, in order to avoid damage during transport or in case of return shipments. – It is normal to find traces of coffee and water in the machine before it is started up for the first time. This is because the appliance has already been tested for faultless function at the factory.

Warning! Danger of fire and electric shock due to incorrect supply voltage, incorrect or damaged connections and power cable. – Ensure that the supply voltage corresponds to the supply voltage specified on the identification label of the appliance. The identification label is on the right side of the appliance behind the cover (Fig. B, no. 18). – Make sure that the power socket meets the applicable standards for electrical safety. If in doubt, contact a qualified electrician. – Never use damaged power cables (damaged insulation, bare wires). – During the guarantee period, have the damaged power cable replaced only by the manufacturer; only after the guarantee period have it replaced by qualified specialists. 4.3 Filling the bean container Thanks to the two-chamber bean container „Bean Select“, you can have the choice between two different types of coffee. For example, you can fill one chamber with espresso beans and the other with café crème beans. Then you can conveniently switch between the two types using the tilt lever. • Fill the bean container (Fig. A, no. 8) with fresh coffee beans. Each of the two chambers can be filled with a maximum of 135 g of coffee beans. Caution! – Fill the bean container with coffee beans only. – Never fill the bean container with ground, freeze-dried, or caramelised coffee beans. • Select the desired bean type by setting the tilt lever to the appropriate chamber.

Since a residual quantity of the previously used beans remains above the grinder, the two types of beans mix when changing to a different bean type. Consequently, when switching over to decaffeinated beans the first two cups may still contain coffee that is not decaffeinated. This means that only the third cup of coffee prepared after the switchover is free of caffeine. Note When the tilt lever is vertical during the brewing process, no beans fall into the grinder. 4.4 Filling the water tank • Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up and out of the appliance. • Fill the water tank to the max. mark with fresh tap water and reinsert it. 4.5 Switching on for the first time All of the tubes have been drained and aired out at the factory. For this reason, the symbol for the valve illuminates after the heat-up phase when starting up for the first time and the appliance must be vented using the valve. Venting is only necessary when starting up for the first time as well as after draining and airing out. You can find more information on page 72. • Switch the power switch (Fig. B, No. 20) to position „I“. • Press the ON/OFF button to switch the appliance on. → The ON /OFF button flashes. The appliance heats up. After the heat-up phase, the valve symbol illuminates. • Place a vessel under the Perfect Cappuccino and push the steam pipe downwards until it is positioned below the brim of the vessel. • Place a vessel below the outlet. • Turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → The valve symbol flashes. Water runs into the vessel below the Perfect Cappuccino.

is illuminated, turn the valve switch anti-clockwise to close the valve. → The appliance performs an automatic rinse and hot water flows out of the outlet. The ON/OFF button is then illuminated. The appliance is ready for operation. 4.6 Adjusting the coffee strength • Press the button for coffee strength several times to select among four possible coffee strengths. → Your selection will then be shown with the bean symbols on the display. Display Coffee strength mild normal (factory setting) strong very strong • You can also adjust the coffee flavour by changing the grinding fineness setting. You can find more information on page 62. 4.7 Adjusting the dispensed quantity • Turn the coffee quantity regulator (Fig. A, No. 12) to adjust the dispensed quantity variably from 30 ml to 220 ml (regulator to the left: 30 ml, regulator in the middle: 125 ml, regulator to the right: 220 ml).

5.1 Switching on the appliance • Switch the power switch (Fig. B, No. 20) to position „I“. → The appliance is in stand-by mode. The ON/OFF button lights up red. • Place a suitable vessel under the outlet. • Press the ON/OFF button to switch the appliance on. → The ON /OFF button flashes. The appliance heats up. The appliance performs an automatic rinse and hot water flows out of the outlet. Then the ON/OFF button and the bean symbols illuminate. The appliance is ready for operation. 5.2 Switching off the appliance • If possible, place a vessel under the outlet. • Press the ON/OFF button to switch the appliance to stand-by mode. → The appliance performs an automatic rinse of the coffee lines. The brewing chamber goes into resting position. The ON/OFF button lights up red. • Switch the power switch (Fig. B, No. 20) to position „0“ to turn off the appliance completely. Notes – The appliance performs an automatic rinse every time it is switched on. – When the appliance is in stand-by mode, only switch it off using the power switch, otherwise there is a danger that the brewing unit will not be in the correct position.

A Melitta® Claris® water filter is supplied with the appliance for filtering out lime scale and other contaminants. Please only insert it after starting up the appliance for the first time. When using the filter, the appliance does not require descaling as often, and the water hardness can be set to 1 (you can find more information on page 57). The service life of your appliance will be extended thanks to the reliable protection from lime scale. The water filter should be changed regularly; however, after two months at the latest. • Set the current month on the blue ring on top of the Melitta® Claris® water filter. This way, you can easily see when it is time to change the Melitta® Claris® water filter. • Put the water filter in a glass with fresh tap water for several minutes before you insert it. • Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up and out of the appliance. • Empty the water tank. • Carefully screw the Melitta® Claris® water filter into the thread on the base of the water tank using the screw-in aid at the bottom end of the coffee scoop provided. • Fill the water tank to the max. mark with fresh tap water and reinsert it. • Place a vessel under the Perfect Cappuccino and push the steam pipe downwards until it is positioned below the brim of the vessel. • Turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → Water now runs into the vessel beneath the Perfect Cappuccino. • As soon as the water tank symbol illuminates, turn the valve switch anti-clockwise to close the valve. → The appliance is ready for operation. Note The Melitta® Claris® water filter should not remain dry over an extended period of time. We therefore recommend storing the Melitta® Claris® water filter in the refrigerator in a glass of water when the appliance will not be in use for extended periods.

7.1 Preparing one cup of espresso or café crème Prerequisite: The appliance is ready for operation (see „Switching on and off“ on page 51). The desired coffee strength and dispensed quantity are set (see page 50). The desired coffee type in the bean container is selected. • Place a suitable vessel under the outlet. • Press the button for one-cup dispensing . → The grinding process and coffee dispensing start now. Dispensing ends automatically when the set dispensed quantity is reached. • To stop dispensing coffee prematurely, press the button for one-cup dispensing . 7.2 Preparing two cups of espresso or café crème Prerequisite: The appliance is ready for operation (see „Switching on and off“ on page 51). The desired coffee strength and dispensed quantity are set. The desired coffee type in the bean container is selected. • Place two suitable vessels beside each other under the outlet. • Press the button for two-cup dispensing . → The double grinding process and dispensing of coffee start now. Dispensing ends automatically when the set dispensed quantity is reached. • To stop dispensing coffee prematurely, press the button for two-cup dispensing .

Prerequisite: The appliance is ready for operation (see „Switching on and off“ on page 51). The desired dispensed quantity is set. • Open the lid of the ground coffee chute (Fig. A, no. 10). → The ground coffee chute symbol flashes. • Fill a max. of one coffee scoop of fresh ground coffee into the ground coffee chute. Caution! – Fill the ground coffee chute with ground coffee only. Instant products can clog up the brewing unit. – Never pour in more than one coffee scoop (supplied with the appliance) of ground coffee, otherwise the brewing unit will be overfilled. • Close the lid of the ground coffee chute. → The ground coffee chute symbol and the button for one-cup dispensing illuminate. • Place a suitable vessel under the outlet. • Press the button for one-cup dispensing . → Coffee dispensing now starts. It ends automatically when the set dispensed quantity is reached. • To stop dispensing coffee prematurely, press the button for one-cup dispensing . Note If you do not dispense coffee from the appliance within 90 seconds after opening the ground coffee chute, the appliance will automatically switch back to coffee bean operation and will discard the ground coffee into the coffee grounds container to prevent later risk of overfilling the brewing chamber.

Prerequisite: The appliance must be ready for operation (see „Switching on and off“ on page 51). • Place a vessel with milk under the Perfect Cappuccino. Make sure that the whisk of the Perfect Cappuccino is immersed in the milk. • Fill the appliance to one third maximum, as the volume of milk increases significantly when frothed. • Press the button for steam dispensing . → The button for steam dispensing flashes. The appliance heats up. When the steam temperature has been reached, the button for steam dispensing and the valve symbol illuminate. Warning! There is danger of burn injuries and scalding due to the hot steam pipe, steam hose and hot whisk. Never touch the steam pipe, the steam hose, or the whisk of the Perfect Cappuccino when in use. • Turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → The valve symbol and the button for steam dispensing flash. The whisk froths the milk and heats it at the same time. You will achieve better frothing results if you move the whisk up and down while frothing. • Turn the valve switch anti-clockwise to close the valve and end the frothing process. The volume of milk should have about doubled and the vessel should be warm to the touch. • Press the button for steam dispensing to switch from steam mode to the normal operating mode. • Wait until the steam pipe has cooled down and then twist off anti- clockwise the steam pipe with whisk from the Perfect Cappuccino (Fig. E). • Pull the whisk of the Perfect Cappuccino downward to remove it from the steam pipe (Fig. F).

them in the dishwasher. • Turn the cleaned steam pipe with whisk clockwise onto the Perfect Cappuccino until it locks into place. Note We recommend using cold milk with a high protein content. It is not the fat content, but rather the protein content that is the determining factor for good milk froth. 9 Preparing hot water Prerequisite: The appliance must be ready for operation (see „Switching on and off“ on page 51). • Place a cloth under the Perfect Cappuccino to catch any residual water that may escape. • Pull the whisk of the Perfect Cappuccino downward to remove it from the steam pipe (Fig. F). • Place a vessel under the steam pipe and slide the steam pipe downward until it is below the brim of the vessel. • Turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → The valve symbol now flashes. Hot water flows out of the steam pipe and into the vessel. • When the desired water quantity is reached, turn the valve switch anti- clockwise to close the valve. • Wait until the steam pipe cools down and slide the whisk from below onto the steam pipe until it locks into place.

Use the test strip provided to determine the water hardness in your area. Comply with the instructions on the test strip package. The appliance is factory-adjusted to water hardness 4. Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). To maintain appliance quality, please adjust the water hardness as follows: • Press the buttons for one-cup dispensing and for steam dispensing simultaneously until the four buttons are weakly illuminated. • Press the button for steam dispensing several times to select among the four possible degrees of water hardness. → The button for steam dispensing is brightly illuminated. Your water hardness selection according to the table is shown with the bean symbols on the display. Water hardness range Properties °dH °f soft 0 - 7.2 °dH 0 - 13 °f medium 7.2 - 14 °dH 13 - 25 °f hard 14 - 21.2 °dH 25 - 38 °f very hard (factory setting) > 21.2 °dH > 38 °f • Press the ON/OFF button to confirm the selected water hardness. → Depending on the selection, 1 to 4 bean symbols flash on the display. The appliance goes back to stand-by mode.

After the last action, the appliance automatically (depending on the settings) switches to energy-saving mode (the appliance thus consumes much less energy than in stand-by mode). You can set different times for the energy-saving mode. The appliance is factory-set at 15 minutes . Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Please set the energy-saving mode as follows: • Press the buttons for one-cup dispensing and for steam dispensing simultaneously until the four buttons are weakly illuminated. • Press the button for coffee strength several times to select among the four possible timer settings. → The button for coffee strength is brightly illuminated. Your selection is shown with the bean symbols on the display. Display Time 5 minutes 15 minutes (factory setting) 30 minutes OFF • Press the ON/OFF button to confirm the selected time. → Depending on the selection, 1 to 4 bean symbols flash on the display as confirmation. The appliance goes back to stand-by mode. Note You can wake up the appliance from the energy-saving mode by pressing any of the buttons. The function of the pressed button (e.g. prepare coffee) will be performed directly, only the heat-up phase takes a little longer.

Two hours after the last action (depending on the settings), the appliance automatically switches to stand-by mode. You can set different times for the stand- by mode. The appliance is factory-set at 2 hours . Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Please set the stand-by mode as follows: • Press the buttons for one-cup dispensing and for steam dispensing simultaneously until the four buttons are weakly illuminated. • Press the button for two-cup dispensing several times to select among the four possible timer settings. → The button for two-cup dispensing is brightly illuminated. Your selection is shown with the bean symbols on the display. Display Time 1 hour 2 hours (factory setting) 4 hours 8 hours • Press the ON/OFF button to confirm the selected time. → Depending on the selection, 1 to 4 bean symbols flash on the display as confirmation. The appliance goes back to stand-by mode. Note In standby mode, the appliance consumes much less energy. However, we recommend switching the appliance off via the power switch if it will not be used for an extended period (e.g. also overnight).

The brewing temperature is factory-set at level 2 (medium ). Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Please set the brewing temperature as follows: • Press the buttons for one-cup dispensing and for steam dispensing simultaneously until the four buttons are weakly illuminated. • Press the button for one-cup dispensing to select among the three possible brewing temperatures. → The button for one-cup dispensing is brightly illuminated. → Your selection will then be shown with the bean symbols on the display. Display Brewing temperature low medium (factory setting) high • Press the ON/OFF button to confirm the selected brewing temperature. → Depending on the selection, 1 to 3 bean symbols flash on the display. The appliance goes back to stand-by mode.

Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). • Switch the appliance off via the power switch. • Wait until the red light in the ON/OFF button extinguishes. • Press the buttons for coffee strength and for two-cup dispensing simultaneously. • At the same time, switch the appliance on via the power switch. → All settings are now reset to the factory settings. Overview of factory settings: Function settings Factory settings Coffee strength normal Water hardness Water hardness 4 Energy-saving mode 15 minutes Standby mode 2 hours Brewing temperature medium

The grinding fineness level was optimally adjusted prior to delivery. Consequently, we recommend that you only readjust grinding fineness after dispensing approximately 1,000 coffees (about 1 year). You can only set the grinding fineness while the mill is running. Thus, adjust grinding fineness directly after coffee dispensing starts. If the coffee flavour is not sufficiently intense, then we recommend that you set a finer grinding level. • Place the lever (Fig. B, no. 19) in one of the three positions (as viewed from the rear of the appliance). Lever position Grinding fineness Left Fine Centre Medium Right Coarse (factory setting)

11.1 General cleaning • Clean the outside of the appliance with a soft, damp cloth and ordinary dishwashing liquid. • Empty and clean the drip tray regularly, at the latest when the float (Fig. A, no. 16) projects out of the cup plate. • Clean the coffee grounds container regularly, e.g. in the dishwasher. Caution! – To avoid damage to the appliance surface, do not use scouring cloths, sponges or cleaning products. – Do not clean the drip tray in the dishwasher; this could cause deformation. 11.2 Cleaning the Perfect Cappuccino • Place a cloth under the Perfect Cappuccino to catch any residual water that may escape. • Turn the steam pipe with whisk anti-clockwise, away from the Perfect Cappuccino (Fig. E). • Pull the whisk of the Perfect Cappuccino downward to remove it from the steam pipe (Fig. F). • Rinse off the steam pipe and the whisk under running water or wash them in the dishwasher. • Slide the whisk onto the steam pipe from below until it locks into place. • Turn the cleaned steam pipe with whisk clockwise onto the Perfect Cappuccino until it locks into place. Note Frequent washing in the dishwasher can cause slight discolourations on the coffee grounds container and on the Perfect Cappuccino.

Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Note For optimal protection of your appliance, we recommend that you clean the brewing unit under running tap water once a week. • Switch the power switch (Fig. B, No. 20) to position „0“ to turn off the appliance completely. • Reach into the recess on the right side of the appliance (Fig. B, no. 18) and pull off the cover to the right. • Press and hold the red button on the handle of the brewing unit (Fig. H) and turn the handle clockwise to the stop (by about 75°). • Use the handle to pull the brewing unit out of the appliance. • Leave the brewing unit as it is (do not move or twist the components of the brewing unit). • Thoroughly rinse off the entire brewing unit from all sides under running water. Particularly ensure that the surface shown in Fig. J is free of coffee residues. Caution! Never clean the brewing unit in the dishwasher. • Let the brewing unit drip dry. • If necessary, remove coffee residues from the surfaces in the interior of the appliance where the brewing unit is inserted. • Reinsert the brewing unit into the appliance and turn the handle of the brewing unit anti-clockwise to the stop to lock. • Insert the two catches of the cover into the back of the appliance and swing the cover to the left until it locks into place. • Switch the power switch (Fig. B, No. 20) to position „I“. • The appliance goes back to stand-by mode.

The integrated cleaning programme removes residues, including coffee oil residues, that cannot be eliminated by hand. It takes a total of approximately 15 minutes. The cleaning button flashes during the entire process. For optimal cleaning results, we recommend that you clean the brewing unit beforehand (see page 64). Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Caution! – Run the integrated cleaning programme every 2 months or after approximately 200 brewed cups of coffee; at the latest, however, run the programme when the symbol for cleaning lights up on the display. – Only use Melitta® cleaning tabs for fully automatic coffee makers. These cleaning tabs are designed specifically for Melitta® CAFFEO®. The use of other cleaning agents can damage the appliance. Run the integrated cleaning programme as follows: 1 Remove the Melitta® Claris® water filter – if used – from the water tank (see page 52). 2 Press the button for one-cup dispensing and the ON/OFF button simultaneously for about 3 seconds. → The symbol for cleaning flashes. The drip tray symbol illuminates. 3 Empty the drip tray and coffee grounds container. 4 Reinsert the drip tray without the coffee grounds container and place the coffee grounds container under the outlet. Phase 1 During Phase 1, one bean symbol is shown on the display. → First, two automatic rinsing processes are carried out. The ground coffee chute symbol illuminates.

→ The ground coffee chute symbol flashes. 6 Throw in a cleaning tab (Fig. G) and close the lid of the ground coffee chute. → The symbol for the water tank illuminates. → Phase 1 is completed. Phase 2 During Phase 2, two bean symbols are shown on the display. 7 Flip up the lid of the water reservoir (Fig. A, no. 3) and pull the water tank up and out of the appliance. Fill the water reservoir to the max. mark with fresh tap water and re-insert it. → The button for steam dispensing illuminates. → Phase 2 is completed. Phase 3 During Phase 3, three bean symbols are shown on the display. 8 Press the button for steam dispensing . → The integrated cleaning programme starts. This stage lasts approximately 10 minutes. The button for steam dispensing is then illuminated. 9 Empty the coffee grounds container and put it back under the outlet. 10 Press the button for steam dispensing . → Phase 3 is completed.

are shown on the display. → The integrated cleaning programme continues. This stage takes approximately 5 minutes. Water flows out of the outlet as well as in the interior of the appliance into the drip tray. Subsequently, the symbol for the drip tray illuminates. 11 Empty the drip tray and the coffee grounds container and then reinsert them. → The ON/OFF button illuminates after a short heat-up phase. The buttons and the bean symbols illuminate. The appliance is ready for operation. Note If the valve symbol lights up during the cleaning process: – Place a vessel under the Perfect Cappuccino and turn the valve switch (Fig. A, no. 6) clockwise to open the valve. – The valve symbol flashes. – As soon as the valve symbol stays illuminated, turn the valve switch anti-clockwise to close the valve. – The integrated cleaning programme continues.

The integrated descaling program removes lime scale in the interior of the appliance. It takes a total of approximately 15 minutes. The symbol for descaling flashes during the entire process. Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). Caution! – Carry out the integrated descaling programme every 3 months or when the descaling symbol illuminates on the display. – Only use Melitta® ANTI CALC Espresso Machines descaling agent. These cleaning tabs are specifically designed for the Melitta® CAFFEO®. – Never use vinegar or other descaling agents. Run the integrated descaling programme as follows: 1 Before descaling, remove – if necessary – the Melitta® Claris® water filter from the water tank (see page 52). 2 Press the button for two-cup dispensing and the ON/OFF button simultaneously for about 3 seconds. → The descaling symbol and the drip tray symbol illuminate. Phase 1 During Phase 1, one bean symbol is shown on the display. 3 Empty the drip tray and coffee grounds container. 4 Reinsert the drip tray without the coffee grounds container, and place the coffee grounds container under the Perfect Cappuccino. → The symbol for the water reservoir illuminates. 5 Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up and out of the appliance and then empty it completely. 6 Add the descaling agent (e.g. Melitta® ANTI CALC Espresso Machines liquid descaling agent) to the water tank according to the instructions on the packaging.

Comply with the safety instructions and the dosing information specified on the descaling agent packaging. 7 Reinsert the water tank. 8 Press the button for steam dispensing . → Phase 1 is completed. Phase 2 During Phase 2, two bean symbols are shown on the display. → The integrated descaling programme is started. Water flows inside the appliance into the drip tray. This stage lasts approximately 10 minutes. Then the valve symbol illuminates. 9 Pull the whisk of the Perfect Cappuccino downward and off of the steam pipe (Fig. F). 10 Turn the Perfect Cappuccino so that the steam pipe is inside the coffee grounds container. Warning! Risk of burns through hot steam pipe or hot whisk Never touch the steam pipe or the whisk of the Perfect Cappuccino during hot water dispensing. 11 Turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → The valve symbol flashes. The descaling solution flows out of the steam pipe into the vessel. This stage lasts approximately 10 minutes. → The drip tray symbol and the water tank symbol will be illuminated when the descaling solution has flowed through the entire appliance. 12 Empty the drip tray and coffee grounds container. 13 Reinsert the drip tray without the coffee grounds container, and place the coffee grounds container under the Perfect Cappuccino.

water and reinsert it. → The button for steam dispensing illuminates. 15 Press the button for steam dispensing . → Phase 2 is completed. Phase 3 During Phase 3, three bean symbols are shown on the display. → The valve symbol flashes. Water flows out of the steam pipe into the vessel. Then the valve symbol illuminates. 16 Turn the valve switch anti-clockwise to close the valve. → Water flows inside the appliance into the drip tray. Subsequently, the symbol for the drip tray illuminates. 17 Empty the drip tray and the coffee grounds container and then reinsert them. 18 Wait until the steam pipe cools down and slide the whisk onto the steam pipe, from below, until it locks into place. → The ON/OFF button illuminates after a short heat-up phase. The buttons and the bean symbols illuminate. The appliance is ready for operation.

You should descale the water tank regularly to ensure faultless function. • Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up and out of the appliance. • Before descaling, remove – if necessary – the Melitta® Claris® water filter from the water tank (see page 52). • Fill the water tank with a commercial descaling agent. We recommend the rapid descaling agent in liquid form from Swirl®. While performing the descaling, closely observe the instructions of the product manufacturer. • Then rinse the water tank thoroughly with clear water. • When using the Melitta® Claris® water filter, reinsert it into the water tank (see page 52). • Fill the water tank to the max. mark with fresh tap water and reinsert it.

12.1 Preparation for transport, protection against freezing and measures for longer periods of non-use Draining and airing out the appliance We recommend draining and airing out the appliance if it is not going to be used for extended periods of time or prior to transport. This also protects the appliance against frost damage. Prerequisite: The appliance is in stand-by mode (see „Switching on and off“ on page 51). • Place a vessel under the Perfect Cappuccino. • Press the button for steam dispensing and the ON/OFF button simultaneously for longer than 2 seconds. → The button for steam dispensing flashes. The symbol for the water tank illuminates. • Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up and out of the appliance. → The button for steam dispensing flashes. • As soon as the valve symbol illuminates on the display, turn the valve switch (Fig. A, no. 6) clockwise to open the valve. → Steam emerges from the Perfect Cappuccino. The valve symbol and the button for steam dispensing flash. As soon as the appliance is drained and aired out, the button for steam dispensing and the valve symbol illuminate. • Turn the valve switch anti-clockwise to close the valve. → The appliance is in stand-by mode. • Reinsert the empty water tank. • Switch the appliance off completely via the power switch. • Pull out the power plug.

of time. We therefore recommend storing the Melitta® Claris® water filter in the refrigerator in a glass of water when the appliance will not be in use for extended periods. Transport • Drain and air out the appliance. • Empty and clean the drip tray and coffee grounds container. • Empty the water tank and the bean container. If necessary, remove beans from the bottom with a vacuum cleaner. • Transport the appliance in the original packaging if possible, including the hard foam elements, to prevent transport damage. Caution! Do not transport or store the appliance in vehicles or rooms at low temperatures, as the remaining water could freeze or condense and thereby damage the appliance. Disposal • Please dispose of the appliance in an environmentally responsible manner by means of suitable collection systems.

through. Grinding fineness is too fine. Set the grinding fineness coarser. Clean the brewing unit. Descale, if necessary. Run the integrated cleaning programme, if necessary. Coffee does not flow. Water tank not filled or incorrectly inserted. Fill the water tank and make sure it is inserted correctly. Open the valve until water flows out of the appliance and then close it again. Brewing unit obstructed. Clean the brewing unit. Grinder does not grind coffee beans. Beans do not drop into the grinder (beans are too oily). Tap lightly on the bean container. The tilt lever is vertical. Move the tilt lever to the right or left. Foreign objects in the grinder Call the hotline. Loud grinder noise. Foreign objects in the grinder Call the hotline. The bean symbols flash even though the bean container is full. Insufficient quantity of ground beans in the brewing chamber Press the button for one-cup dispensing or two-cup dispensing . The valve symbol illuminates out of turn. There is air in the lines inside the appliance. Open the valve until water flows out of the appliance and then close it again. If necessary, clean the brewing unit.

can no longer be reinserted after removal. The brewing unit is not properly locked. Check whether the handle for locking the brewing unit is correctly engaged. The actuator is not in the proper position. Switch the appliance off and on again, an then press the buttons for one- and two- cup dispensing simultaneously for longer than 2 seconds. The actuator moves into position. Then reinsert the brewing unit and make sure it is correctly locked into place. The buttons for one- and two-cup dispensing flash alternately with the ON/OFF button . The brewing unit is missing or is not properly inserted. Insert the brewing unit properly. The brewing chamber is overfilled. Switch the appliance off and on again via the power switch (repeat if necessary), until standby mode is displayed. Continuous flashing of all buttons System error Switch the appliance off and on again via the power switch, if this does not work, send the appliance to Customer Service. Please contact the Melitta® hotline, if the above mentioned solutions do not help to solve the problem: +49 571/ 86 1900.