JAGER PRO M.I.N.E. Operation Manual

input the recipient phone number. Use the keypad to type the 10-digit phone number. Select SAVE which returns to the Phone submenu. Select SAVE which returns to the WIRELESS submenu. Press the delete button to erase each of the number characters. Use the arrow buttons to select the numbers. Select save to return to menu. MENU ok • Email: Press OK to select an open tab and move right one click to input the recipient email address. Use the keypad to type the email address. Select SAVE which returns t ...

name. Use the keypad to type the information. Select SAVE and return to the WIRELESS submenu. Copy Para: Will not be used for normal daily operations. Setup Tool: Will not be used for normal daily operations. MANUALLY SENDING PHOTO Our 3G camera is designed to test program settings and SIM card service by manually sending a photo. Move the selector switch from OFF to SETUP. Allow the camera 30 seconds to search the wireless 3G network. AT&T will appear in the top center of the LCD screen after co ...

mounting port. Thread the mounting bracket no more than three complete rotations into the camera mounting port. Then tighten using the adjusting nut. Forcing external threads to the bottom will damage the camera mounting port and the camera housing. Never mount the M.I.N.E.™ Cam on the same T post securing a trap panel or severe damage may result. Always mount the M.I.N.E.™ Cam on a separate 8 foot long T post at least 12 to 24 inches outside the trap enclosure. Lower the square collar at a diagon ...

name. Use the keypad to type the information. Select SAVE and return to the WIRELESS submenu. Copy Para: Will not be used for normal daily operations. Setup Tool: Will not be used for normal daily operations. MANUALLY SENDING PHOTO Our 3G camera is designed to test program settings and SIM card service by manually sending a photo. Move the selector switch from OFF to SETUP. Allow the camera 30 seconds to search the wireless 3G network. AT&T will appear in the top center of the LCD screen after co ...

step will verify the camera is positioned and programmed correctly. Ensure the feeder is centered and the entire gate opening is visible. From left to right- JAGER PRO is the camera manufacturer. The “M” indicates the photo was triggered by “Motion”. The letter “S” would indicate a photo triggered by SMS code *500#. “P” would indicate a photo triggered by “Time Lapse” and “E” would indicate a manually triggered photo using the camera’s OK select button during SETUP. The date is 26 JUNE 2014. ...

phone service technology to GSM, which is the world’s most widely used cell phone standard. Sprint, Verizon, and Virgin Mobile use CDMA. GPRS- General Packet Radio Service was early technology to enable data communication on GSM networks. It has since been replaced by better data technologies such as EDGE and 3G. It is based on GSM and compliments SMS. GSM- Global System for Mobile communications. Cell phones use a cellular provider’s GSM network by searching for cellular phone towers in the nearby area. GSM has more complete ...

photo or video capture. We recommend a two minute trigger interval. A one minute selection may not allow a photo to transmit via SMS in low signal areas before the next PIR trigger. The photo is always saved on the SD card but may not have time to send via SMS to your phone or email. • Time Lapse OFF: Camera triggers only during PIR event. (Recommend) ON: Camera automatically triggers at selected intervals. Trigger Tab: • Sensitivity- Passive Infrared (PIR) Trigger Sensitivity High: The most sensitive setting and w ...

Control Products, Services and Education View our instructional video series online at: PO Box 4006 Columbus, GA 31914 Phone: 706-718-9789 Email: [email protected] Website: www.jagerpro.com Like us on Facebook www.facebook.com/JAGERPROHCS ...