IEI Technology ICEROCK3-T10 Operation & User’s Manual

Page 41 Figure 4-5: 3.75G Driver InstallShield Wizard Step 3: Follow the step-by-step instruction of the installation wizard to install the HD Audio driver. 4.5 Audio Driver To install the driver for the speaker and the microphone, please follow the steps below. Step 1: Select Audio from the list of the driver CD. Locate the driver setup file as shown in 474Figure 4-6. ...

Page 97 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER ; W_LOOP: MOV AX, 6F02H ;setting the time-out value MOV BL, 30 ;time-out value is 48 seconds INT 15H ; ; ADD THE APPLICATION PROGRAM HERE ; CMP EXIT_AP, 1 ;is the application over? JNE W_LOOP ;No, restart the application MOV AX, 6F02H ;disable Watchdog Timer MOV BL, 0 ; INT 15H ; ; EXIT ; ...

Page 8 1.9 Technical Specifications The technical specifications for the ICEROCK3-T10 systems are listed in the table below. System ICEROCK3-T10 CPU 1.700 GHz Intel® Core̬ i7-3517U processor 1.50 GHz Intel® Celeron® processor 1007U Chipset Intel® HM76 Memory 4.0 GB DDR3 SDRAM on board Optional 4.0 GB DDR3 SDRAM SO-DIMM OS Windows Embedded Standard 7 Storage Preinstalled 32 GB MLC mSATA One microSD card slot Audio 1 x Speaker (2 W) 1 x Digital microphone on the front panel 1 x Analog microphone connector on the side panel Camera 1 x 1.3-megapixel webcam (front panel) ...

Page 6 1.5 Rear Panel The rear panel consists of the built-in battery and VESA mounting holes. The optional 5-megapixel camera is also located on the rear panel. Figure 1-4: Rear Panel 1.6 Side Panels The right side panel has a barcode on/off button. The left side panel consists of I/O ports and slots. See Figure 1-5. Figure 1-5: Side Panel ...

Page 59  Intel SMX Technology: Indicates if Intel SMX Technology is supported by the CPU.  64-bit: Indicates if 64-bit system is supported by the CPU.  L1 Data Cache: Lists the amount of data storage space on the L1 cache.  L1 Code Cache: Lists the amount of code storage space on the L1 cache.  L2 Cache: Lists the amount of storage space on the L2 cache.  L3 Cache: Lists the amount of storage space on the L3 cache.  Hyper Threading [Enabled] Use the Hyper Threading to enable or disable the CPU hyper threading function.  Disabled Disables the use o ...