Grandstream Networks GXP2120 Operation & User’s Manual

Page 74 of 81 By default the City Code is set to "Automatic", which allows the phone to obtain weather information based on the IP location detected. To use "Self-Defined City Code" option, please follow the steps below to obtain the correct city code:  In a web browser, go to www.weather.com;  Enter the city name in the search field. For example, Boston, MA. And click on "SEARCH";  The searching result will show in a new window with URL in the browser's address bar. For example, http://www.weather.com/weather/r ...

Page 5 of 81 GUI INTERFACE EXAMPLES http://www.grandstream.com/products/gxp_series/general/documents/gxp21xx_gui.zip 1. Screenshot of Login Page 2. Screenshots of Status Pages 3. Screenshots of Accounts Pages 4. Screenshots of Settings Pages 5. Screenshots of Network Pages 6. Screenshots of Maintenance Pages 7. Screenshots of Phonebook Pages ...

Page 69 of 81  SIP message summary (INFO level);  inbound and outbound calls (INFO level);  registration status change (INFO level);  negotiated codec (INFO level);  ethernet link up (INFO level);  SLIC chip exception (WARNING and ERROR levels);  memory exception (ERROR level). Send SIP Log Configures whether the SIP log will be included in the syslog messages or not. The default setting is "No". Auto Recover From Abnormal Configures whether auto recover or not when the phone is running abnormal. The ...

Page 18 of 81 5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up; 6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP address in web browser, you can further configure the phone. Please see below the pin-out information for GXP2120/GXP2110/GXP2100/14xx. Figure 1: GXP2120/GXP2110/GXP2100/GXP14xx Pin-out GXP2120/GXP2110 EXTENSION MODULE GXP2120/2110 supports two EXT boards, providing up to 1 ...

Page 34 of 81  Attended Transfer.  During the first active call, press LINE key. The first call will be put on hold;  Enter the number for the second call in the new line and establish the call;  Press TRAN key;  Press the other LINE key which is on hold to transfer the call.  Auto-Attended Transfer.  Set "Auto-Attended Transfer" to "Yes" under Web GUI->Settings->Call Features. And then click "Save and Apply" on the bottom of the page;  Establish one call first;  During the call, press TRAN key ...