Goldair GCDF051 Operating Instructions

Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference. TECHNICAL SPECIFICATION Model: GCDF051 Supply: 220 - 240VAC 50Hz Wattage: 16W 1. Use only the voltage specified on the rating plate of the appliance. 2. Keep all objects at least 1 Metre from the front, sides and rear of the appliance 3. This appliance is intended for household use only and not for commercial or industrial use. 4. Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury. 5. The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills. 6. Always unplug appliance when not in use. 7. When the appliance has been unpacked, check if for transport damage and ensure all parts have been delivered. If parts are missing of the appliance has been damaged, contact the CDB Customer Services Team. 8. If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user. 9. Ensure hands are dry before handling the plug or the Fan. 10. Carry out regular checks of the supply cord to ensure no damage is evident. 11. Children should be supervised to ensure that they do not play with the appliance. 12. Ensure that the cord is fully extended (not coiled) while in use. 13. Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the Fan during operation to reduce the risk of injury to person and/or damage to the Fan. 14. Switch off and use handles provided when moving. 15. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the Fan by a person responsible for their safety. 16. Never place appliance close to radiant heat source. 17. Never operate in areas where petrol, paint or other flammable liquids are used or stored. 18. Never use the appliance to dry clothes. 19. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance. 20. Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning. 21. Never connect the appliance to mains supply until completely assembled and adjusted. 22. Never remove plug from power socket until the appliance has been switched off. 23. Never remove plug from power socket by pulling cord – always grip plug. 24. Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use. 25. Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids. 26. Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels and other residential type environments, bed and breakfast type environments 27. Never use this appliance outdoors. 28. The use of an extension cord, power board, or external timer is not recommended with this unit. 29. Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

clockwise until it totally comes out of the M6 Screw Nut. Place the extension under the motor unit into the slot of the Base Align the two connecting pieces such that their holes are in line. Penetrate the Adjusting Screw through the holes of the two connecting pieces Fasten by turning the Adjusting Screw clockwise. CAUTION: When placing a fan on a table or shelf, always ensure that the power cord does not hang where it can accidentally be pulled and that the unit cannot accidentally fall. Do not hang or mount the fan on a wall or ceiling. 1. On / Off and Speed Control The ON/OFF and Speed is controlled by the Turning Switch, which is located on the rear motor housing indicated in the above diagram. 0 - The Fan is switched Off 1 - The Fan operates at the lowest speed 2 - The Fan operates at the highest speed 2. Angle Adjustment Switch off the fan. Slightly loosen the Adjusting Screw by turning it anti-clockwise. Adjust the fan to the desired angle and then tighten the Adjusting Screw by turning it clockwise. Assembly Operating your Fan

Monday – Friday 8am-5pm Phone +64 (0)9 917 4000 Phone 0800 232 633 [email protected] Goldair – Australia Monday – Friday 8am-5pm Phone +61 (0)3 9336 4423 Phone 1300 465 324 [email protected] SUPPORT AND TECHNICAL ADVICE PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). Cleaning To avoid risk of electric shock, before cleaning, you MUST ALWAYS switch off and unplug the Fan before cleaning. Use only a soft, damp cloth to gently wipe the Fan and dry well. DO NOT immerse the Fan in water and never allow water to enter the motor housing. DO NOT use harsh chemicals to clean the Fan.

domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician. PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY. The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993). One Year Warranty Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty card) Name Address Place Of Purchase Date of Purchase Name Of Product Model Number Attach a copy of the purchase receipt to this warranty card Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product. Goldair – New Zealand CDB Goldair PO Box 100-707 N.S.M.C Auckland Phone +64 (0)9 917 4000 Phone 0800 232 633 www.goldair.co.nz Goldair – Australia CDB Goldair Australia Pty PO Box 574 South Morang Victoria, 3752 Phone +61 (0)3 9336 4423 Phone 1300 GOLDAIR (1300 465 324) www.goldair.com.au