Handicare BASEONE Service Manual

All rights reserved. The information provided herein may not be reproduced and/or published in any form, by print, photo print, microfi lm or any other means whatsoever (electronically or mechanically) without the prior written authorisation of Handicare. The information provided is based on general data concerning the constructions known at the time of the publication of this manual. Handicare executes a policy of continuous improvement and reserves the right to changes and modifi cations. The information provided is valid for the product in its standard version. Handicare cannot be held liable for possible damage resulting from specifi cations of the product deviating from the standard confi guration. The available information has been prepared with all possible diligence, but Handicare cannot be held liable for possible errors in the information or the consequences thereof. Handicare accepts no liability for loss resulting from work executed by third parties. Names, trade names, etc. used by Handicare may not, as per the legislation concerning the protection of trade names, be considered as being available.

1.1 Use of the parts lists 5 1.2 Carrier 6 01 Front frame BaseOne 6 02 Rear frame BaseOne 12,5" 7 03 Rear frame BaseOne 20" 8 04 Rear frame BaseOne 24" 9 05 Rear frame BaseOne with Power assist 11 06 Carrier and motors Midway / Antibes (FWD) 12 07 Carrier and motors Belize / Capri / Rhino (RWD) 14 08 Covers and lighting Midway / Antibes (FWD) 16 09 Covers and lighting Belize / Capri / Rhino (RWD) 17 1.3 Seat adjustments 18 10 Mechanical tilt BaseOne 12,5" 18 11 Mechanical tilt BaseOne 20 and 24" 19 12 Mechanical tilt Midway / Antibes (FWD) 20 13 Mechanical tilt Belize / Capri / Rhino (RWD) 21 14 Electrical tilt BaseOne 20 and 24" 22 15 Electrical tilt Midway / Antibes (FWD) 23 16 Electrical tilt Belize / Capri / Rhino (RWD) 24 1.4 Seating frames 25 17 Seating frame BaseOne 25 18 Seating frame Midway / Antibes / Belize / Capri 26 19 Optimum Support System 30 cm Rhino 27 20 Optimum Support System 35 cm Rhino 28 21 Kid-fi t 30 cm Rhino 29 22 Kid-fi t 35 cm Rhino 30 1.5 Armrests 31 23 Armrest with remote Midway / Antibes / Belize / Capri 31 24 Armrest PU with remote Midway / Antibes / Belize / Capri 32 25 Armrest with remote Rhino 33 26 Armrest without remote Midway / Antibes / Belize / Capri 34 27 Armrest PU without remote Midway / Antibes / Belize / Capri 35 28 Armrest without remote Rhino 36 1.6 Legrests 37 29 Standard legrest 37 30 Standard legrest with calf plate 38 31 Hockey legrest 39 32 Comfort legrest 40 33 Comfort legrest seat width 55 cm 41 34 Electrical legrest 42 35 Electrical legrest seat width 55 cm 43 36 Central legrest BaseOne 44 37 Central legrest 5 cm shortened BaseOne 45 38 Central legrest Midway / Antibes / Belize / Capri / Rhino 46 39 Central legrest with calf plate Midway / Antibes / Belize / Capri / Rhino 47 40 Central legrest electrical Midway / Antibes / Belize / Capri / Rhino 48 41 Central legrest electrical angle adjustable Midway / Antibes / Belize / Capri / Rhino 49 42 Legrest holder 50 43 Legrest holder electrical 51 44 Mounting plate for legrest holder 52 2 Warranty ............................................................................................................................................................. 53 2.1 Defi nitions of terms 53 2.2 Warranty period table 53

1 Spare parts 1.1 Use of the parts lists This document is meant as a reference book to be used to order parts. How to order: When ordering parts, please specify: • Serial number (see the identifi cation plate) • Group (to which the relevant part belongs) • Article number • Number of parts required • Description (in the relevant language) • Dimensions (if applicable) Remark: • If a part does not have a position number, it means that the part concerned cannot be purchased separately. The part concerned is part of the assembly shown. This assembly must be ordered as one piece. It has to be replaced in its entirety. • Boxed position numbers refer to the relevant drawing. Order address: Please mail or fax your orders to your supplier. Service technicians: Repairs may only be carried out by trained and authorised service technicians. During the execution of their work they are at all times fully responsible for the fulfi lment of locally applicable safety guidelines and standards. Temporary employees and persons in training may only carry out repair and replacement work under the supervision of an authorised service technician.

Pos Qty Article number Description 1 1 41200 Front frame 2 2 91143 Insert cap round 30mm adjusted 3 2 02010.5910 Fork, 200x60, black, for swivel wheel, complete 4 2 41031 Swivel wheel PU, 7x1 3/4 - 2 AC40106 Swivel wheel air, 7x1 3/4 1.2 Carrier 01 Front frame BaseOne

Pos Qty Article number Description 02 Rear frame BaseOne 12,5" 1 1 41207 Subframe, 12.5 inch 2 2 91103 Vibration damper 50x20 3 1 41211 Clamp block assembly hinge 4 2 91095 Pedal, rubber 5 1 41217 Hinge shaft 6 2 41227 Bierman bush 7 2 41208 Brake support plate 8 2 00000.4901 Ball knob M8 R/32 black 9 2 40001 Cap, pear-shaped, for brake pedal 10 2 91049 Slide bearing, plastic, 10 14x20x10 11 2 41026 Brake pawl 12 1 41212 Clamp block assembly cover 13 2 1001171 Hex bolt M12x90 14 1 41209 Brake handle 15 2 41032 Wheel, 12.5 inch, black plastic (without brake) 16 1 01010.4112 Drum brake for BaseOne, 12 inch, left 17 1 01010.4212 Drum brake for BaseOne, 12 inch, right 18 2 00000.1404 Shaft lock washer 7mm 19 2 40002 Ball joint, M6x25 - 1 AC40200 Anti tip, set - 1 41043 Wheel, 12.5 inch, with solid tyre, black, plastic (without brake)

Pos Qty Article number Description 03 Rear frame BaseOne 20" 1 1 41201 Subframe, 20-24 inch 2 1 41212 Clamp block assembly cover 3 2 41210 Wheel height plate, 20-24 inch 4 2 91103 Vibration damper 50x20 5 1 41211 Clamp block assembly hinge 6 2 91095 Pedal, rubber 7 2 41227 Bierman bush 8 1 41217 Hinge shaft 9 4 41233 Shim 10 2 1006777 Insert cap round 30mm 11 1 41205-D Cable brake corner plate 11,16-23 1 41205 Cable brake pin, set 12 1 41228 Brake lever, 20-24 inch, left 13 1 41229 Brake lever, 20-24 inch, right 14 2 8600283 Ball knob M6 R/32 black 15 2 91051 Collar bearing, plastic (directional stabilizer) 16 1 41205-A Cable brake pin 17 2 4363650 Cilinder pin M6x10 18 1 41205-B Cable brake lever 19 2 41226 Bearing cable brake, iglidur 20 2 41225 Bearing cable brake, bronze 21 1 41205-C Cable brake link 22 1 41205R Cable brake side plate, right 23 1 41205L Cable brake side plate, left 24 2 00000.1404 Shaft lock washer 7mm 25 1 1007748 Wheel 20" air left with brake 25 1 7000031 Wheel 20" PU left with brake 26 1 1007749 Wheel 20" air right with brake 26 7000032 Wheel 20" PU right with brake 50 1 41256 Battery carrier, BaseOne push wheelchair 51 2 41241-A Tube clamp bracket, 430, aluminium, round 52 2 41241-B Tube clamp bracket, 430, aluminium, unmachined

Pos Qty Article number Description 1 1 41201 Subframe, 20-24 inch 2 1 41212 Clamp block assembly cover 3 2 41210 Wheel height plate, 20-24 inch 4 2 91103 Vibration damper 50x20 5 1 41211 Clamp block assembly hinge 6 2 91095 Pedal, rubber 7 2 41227 Bierman bush 8 1 41217 Hinge shaft 9 2 00000.1404 Skiffy shaft lock washer A-7 10 2 1007750 Wheel, 24 inch, including brake, left 10 2 1007751 Wheel, 24 inch, including brake, right 11 1 1009577 Brake for 20-24-inch wheel, left 12 1 1009578 Brake for 20-24-inch wheel, right 13 4 41233 Shim 14 2 1006777 Insert cap round 30mm 15 1 41205-D Cable brake corner plate 15,20-27 1 41205 Cable brake pin, set 16 1 41228 Brake lever, 20-24 inch, left 17 1 41229 Brake lever, 20-24 inch, right 18 2 8600283 Ball knob M6 R/32 black 19 2 91051 Collar bearing, plastic (directional stabilizer) 20 1 41205-A Cable brake pin 21 2 4363650 Cilinder pin M6x10 22 1 41205-B Cable brake lever 23 2 41226 Bearing cable brake, iglidur 24 2 41225 Bearing cable brake, bronze 25 1 41205-C Cable brake link 26 1 41205R Cable brake side plate, right 27 1 41205L Cable brake side plate, left 04 Rear frame BaseOne 24"

Continued from 03 Rear frame BaseOne 20" Pos Qty Article number Description 28 1 41256 Battery carrier, BaseOne push wheelchair 29 2 41241-A Tube clamp bracket, 430, aluminium, round 30 2 41241-B Tube clamp bracket, 430, aluminium, unmachined - 2 41230 Brake cable - 2 41234 Ergo-grip, 24 inch, black

Pos Qty Article number Description 1 1 41254 Rear frame Base-1 power assist 2 2 91095 Pedal, rubber 3 2 1006777 Insert cap round 30mm 4 2 91103 Vibration damper 50x20 5 2 41061 End cap, motor 6 2 21008 Spacer bushing, drive wheel, B/M 7 2 41062 Winged knob, brake freewheel 8 1 41211 Clamp block assembly hinge 9 1 41212 Clamp block assembly cover 10 2 11033 Wheel hub for aluminium rim 11 1 41217 Hinge shaft 12 2 1015258 Drive wheel, air 12 1/2 x 2 1/4, block profi le 12 2 1015259 Drive wheel, PU 12 1/2 x 2 1/4, block profi le 13 2 4506450 Key for motor for powered wheelchair 14 2 49004 Brake for motor 12V 15 1 41054 Motor, left, 12V, for motor-assisted version (50-770B), without brake 16 1 41055 Motor, right, 12V, for motor-assisted version (50-771B), without brake 17 2 00000.1404 Shaft lock washer 7mm - 2 1015118 Inner tube 12 1/2 x 2 1/4 - 2 1015112 Outer tyre 12 1/2 x 2 1/4 grey block profi le 05 Rear frame BaseOne with Power assist

Pos Qty Article number Description 06 Carrier and motors Midway / Antibes (FWD) 1 1 11001-blauw Frame Bleu 1 1 11001-oranje Frame Pearl-Orange 1 1 11001-zwart Frame Black 2 2 11003 Fork, 17 mm 3 1 21029-E Motor bracket, extended for FWD, right 4 2 11060 Handle, EMD motor 4 2 1010153 Handle, Schmid motor 5 1 21028-E Motor bracket, extended for FWD, left 6 1 11516 Battery box 7 2 053.00001.000 Insert cap, fl at, oval, 60x30 8 2 8744990 Insert cap, diameter 36 9 1 1015234 Swivel wheel left, air 300x4 (260 x 85) 9 1 1015236 Swivel wheel left, PU 300x4 (260 x 85) 9 1 1015235 Swivel wheel right, air 300x4 (260 x 85) 9 1 1015237 Swivel wheel right, PU 300x4 (260 x 85) 9 2 1015242 Swivel wheel, aluminium, air 2.80/2.50-4 9 2 1015243 Swivel wheel, aluminium, PU 2.80/2.50-4 10 2 00000.2806 Cupped spring washer 34,6x22,4x0,5 11 1 21042 Micro Motor 350W RWD left/FWD right (PGMST 90/50-L 038.8018) 11 1 1009565 Micro Motor 350W RWD left/FWD right for DX (PGMST 90/50-L 038.8018) 11 1 21051 EMD Motor 350W RWD left/FWD right (90BB-9100) 11 1 7000040 EMD Motor 350W RWD left/FWD right for DX (90BB-9100) 11 1 1008582 Schmid Motor 300W RWD left/FWD right 11 1 1009563 Schmid Motor 300W RWD left/FWD right for DX - 2 91123 Carbon brush EMD - 2 103.00031.000 Carbon brush Schmid 12 4 91067 Slide bearing plastic, M-250 13 2 4506450 Key for motor for powered wheelchair 14 2 1006751 Collar 18mm

Continued from 06 Carrier and motors Midway / Antibes (FWD) Pos Qty Article number Description 15 4 0695560 Ball bearing 6003 16 4 31012 Spacer bushing, drive wheel for Antibes, Capri 17 2 8600282 Ball knob M6 R/20 black 18 1 21043 Micro Motor 350W RWD right/FWD left (PGMST 90/50-L 038.8019) 18 1 1009566 Micro Motor 350W RWD right/FWD left for DX (PGMST 90/50-L 038.8019) 18 1 21052 EMD Motor 350W RWD right/FWD left (90BB-9101) 18 1 7000041 EMD Motor 350W RWD right/FWD left for DX (90BB-9101) 18 1 1008584 Schmid Motor 300W RWD right/FWD left 18 1 1009564 Schmid Motor 300W RWD right/FWD left for DX - 2 91123 Carbon brush EMD - 2 103.00031.000 Carbon brush Schmid 19 2 11029 Star knob, M8, complete 20 2 1015252 Wheel, aluminium, air 300x8, block profi le 20 2 1015253 Wheel, aluminium, PU 300x8, block profi le 20 2 1015258 Drive wheel, air 12 1/2 x 2 1/4, block profi le 20 2 1015259 Drive wheel, PU 12 1/2 x 2 1/4, block profi le 21 2 11033 Wheel hub for aluminium rim 22 2 21030-E Spring strut support for FWD, long base 23 2 11009 Engine mounting pin 24 1 11039 Pin, suspension bracket with end stop 25 2 91018 Bush bearing IJzk 08/12-8 26 2 12020 Suspension bracket rubber, 20x25, M6 27 1 11015 Suspension bracket 28 2 AC20400 Spring strut, standard, L=240 - 1 91127 Motor brake left/right for EMD motor - 1 1003243 Motor brake right for Schmid motor (3 mounting bolts) Till 10-05-2010 - 1 1003242 Motor brake left for Schmid motor (3 mounting bolts) Till 10-05-2010 - 1 1011125 Motor brake right for Schmid motor (2 mounting bolts) From 10-05-2010 - 1 1011124 Motor brake left for Schmid motor (2 mounting bolts) From 10-05-2010 - 2 VL10040 Fork and bearing set, 17 mm - 2 8600283 Ball knob M6 R/32 black, for freewheel lever - 1 11014 Battery strap - 2 9002006 Wheelcover grey - 2 91124 Carbon brush holder cap EMD motor 350W - 2 SP20019 Fork with suspension - 1 99120 Fuse holder set, complete - 1 99117 Fuse 100A - 2 1015115 Inner tube 3.00x4 - 2 1015105 Outer tyre 3.00x4 grey block profi le - 2 1015116 Inner tube 2.80/2.50x4 - 2 1015107 Outer tyre 2.80/2.50x4 grey line profi le - 2 1015117 Inner tube 3.00x8 - 2 1015111 Outer tyre 3.00x8 grey block profi le - 2 1015118 Inner tube 12 1/2 x 2 1/4 - 2 1015112 Outer tyre 12 1/2 x 2 1/4 grey block profi le

Pos Qty Article number Description 07 Carrier and motors Belize / Capri / Rhino (RWD) 1 1 11001-blauw Frame Bleu 1 1 11001-oranje Frame Pearl-Orange 1 1 11001-zwart Frame Black 2 1 21002-E Motor bracket, left, for RWD 3 2 11060 Handle, EMD motor 3 2 1010153 Handle, Schmid motor 4 1 21001-E Motor bracket, right, for RWD 5 1 11015 Suspension bracket 6 2 11003 Fork, 17 mm 7 1 11516 Battery box 8 2 11029 Star knob, M8, complete 9 2 12020 Suspension bracket rubber, 20x25, M6 10 2 8744990 Insert cap, diameter 38 11 2 053.00001.000 Insert cap, fl at, oval, 60x30 12 4 0695560 Ball bearing 6003 13 1 21043 Micro Motor 350W RWD right/FWD left (PGMST 90/50-L 038.8019) 13 1 1009566 Micro Motor 350W RWD right/FWD left for DX (PGMST 90/50-L 038.8019) 13 1 21052 EMD Motor 350W RWD right/FWD left (90BB-9101) 13 1 7000041 EMD Motor 350W RWD right/FWD left for DX (90BB-9101) 13 1 1008584 Schmid Motor 300W RWD right/FWD left 13 1 1009564 Schmid Motor 300W RWD right/FWD left for DX - 2 91123 Carbon brush EMD - 2 103.00031.000 Carbon brush Schmid 14 2 4506450 Key for motor for powered wheelchair 15 2 8600282 Ball knob M6 R/20 black 16 1 21042 Micro Motor 350W RWD left/FWD right (PGMST 90/50-L 038.8018) 16 1 1009565 Micro Motor 350W RWD left/FWD right for DX (PGMST 90/50-L 038.8018) 16 1 21051 EMD Motor 350W RWD left/FWD right (90BB-9100) 16 1 7000040 EMD Motor 350W RWD left/FWD right for DX (90BB-9100)

Continued from 07 Carrier and motors Belize / Capri / Rhino (RWD) Pos Qty Article number Description 16 1 1008582 Schmid Motor 300W RWD left/FWD right 16 1 1009563 Schmid Motor 300W RWD left/FWD right for DX - 2 91123 Carbon brush EMD - 2 103.00031.000 Carbon brush Schmid 17 4 31012 Spacer bushing, drive wheel for Antibes, Capri 18 2 91018 Bush bearing IJzk 08/12-8 19 1 1015234 Swivel wheel left, air 300x4 (260 x 85) 19 1 1015236 Swivel wheel left, PU 300x4 (260 x 85) 19 1 1015235 Swivel wheel right, air 300x4 (260 x 85) 19 1 1015237 Swivel wheel right, PU 300x4 (260 x 85) 19 2 1015242 Swivel wheel, aluminium, air 2.80/2.50-4 19 2 1015243 Swivel wheel, aluminium, PU 2.80/2.50-4 20 2 1015252 Wheel, aluminium, air 300x8, block profi le 20 2 1015253 Wheel, aluminium, PU 300x8, block profi le 20 2 1015258 Drive wheel, air 12 1/2 x 2 1/4, block profi le 20 2 1015259 Drive wheel, PU 12 1/2 x 2 1/4, block profi le 21 2 21007 Spring strut support, anti-tip 22 2 11033 Wheel hub for aluminium rim 23 2 11009 Engine mounting pin 24 4 91067 Slide bearing plastic, M-250 25 2 1006751 Collar 18mm 26 2 00000.2806 Cupped spring washer 34,6x22,4x0,5 27 2 AC20400 Spring strut, standard, L=240 28 1 11039 Pin, suspension bracket with end stop - 1 91127 Motor brake left/right for EMD motor - 1 1003243 Motor brake right for Schmid motor (3 mounting bolts) Till 10-05-2010 - 1 1003242 Motor brake left for Schmid motor (3 mounting bolts) Till 10-05-2010 - 1 1011125 Motor brake right for Schmid motor (2 mounting bolts) From 10-05-2010 - 1 1011124 Motor brake left for Schmid motor (2 mounting bolts) From 10-05-2010 - 2 VL10040 Fork and bearing set, 17 mm - 1 11014 Battery strap - 2 9002006 Wheelcover grey - 2 91124 Carbon brush holder cap EMD motor 350W - 2 SP20019 Fork with suspension - 1 99120 Fuse holder set, complete - 1 99117 Fuse 100A - 2 91003 Anti-tip wheel - 2 1015115 Inner tube 3.00x4 - 2 1015105 Outer tyre 3.00x4 grey block profi le - 2 1015116 Inner tube 2.80/2.50x4 - 2 1015107 Outer tyre 2.80/2.50x4 grey line profi le - 2 1015117 Inner tube 3.00x8 - 2 1015111 Outer tyre 3.00x8 grey block profi le - 2 1015118 Inner tube 12 1/2 x 2 1/4 - 2 1015112 Outer tyre 12 1/2 x 2 1/4 grey block profi le

Pos Qty Article number Description 08 Covers and lighting Midway / Antibes (FWD) Pos Qty Article number Description 1 1 7000017 Side cover, extended, left 2 1 7000018 Side cover extended, right 3 1 11012 Battery box cover, standard 4 1 11013 Battery box shield 5 1 29002 Lighting cable, rear 6 2 00355.4224 Rear light 7 2 00355.4225 Indicator light 8 1 21033 Rear lighting bracket 9 1 29001 Lighting unit cover for Belize 9 1 29020 Lighting unit cover, raise, for RWD 10 2 21020 Support for directional stabilizer, mounting bar - 1 AC40000L Lighting unit, halogen, left - 1 AC40000R Lighting unit, halogen, right - 1 AC40020L Lighting unit, halogen, for raise, left - 1 AC40020R Lighting unit, halogen, for raise, right - - 99008 Bulb 12 V, pin fi tting - - 99009 Bulb 24 V, pin fi tting - 1 29521 Rear lighting bar, complete, FWD

Pos Qty Article number Description 09 Covers and lighting Belize / Capri / Rhino (RWD) 1 1 7000019 Side cover, left 2 1 7000020 Side cover, right 3 2 00355.4224 Rear light 4 2 00355.4225 Indicator light 5 1 29020 Lighting unit cover, raise, for RWD 5 1 29001 Lighting unit cover for Belize 6 1 11012 Battery box cover, standard 7 1 11013 Battery box shield 8 1 29002 Lighting cable, rear - 1 AC40000L Lighting unit, halogen, left - 1 AC40000R Lighting unit, halogen, right - 1 AC40020L Lighting unit, halogen, for raise, left - 1 AC40020R Lighting unit, halogen, for raise, right - - 99033 Refl ector, rectangular, red - - LI10035 Lighting set without ALM module - - LI10000 Lighting set incl. ALM module - - 29520 Rear lighting bar, complete, RWD

Pos Qty Article number Description Pos Qty Article number Description 1 1 41202 Column, short 2 1 41206 Gas spring adjustable bracket, long 3 1 41218 Lock pin, gas spring 37 4 1 41219 Lock pin, gas spring 50 5 6 41220 Inner spacer, gas spring 6 1 41010 Seat frame pin 7 1 41239 Gas spring tilt, long (800N 17cm) 8 2 91049 Slide bearing, plastic, 10 14x20x10 9 6 00000.1404 Skiffy shaft lock washer A-7 10 2 1006788 Carriage bolt M10x50 1.3 Seat adjustments 10 Mechanical tilt BaseOne 12,5"

Pos Qty Article number Description 11 Mechanical tilt BaseOne 20 and 24" 1 1 41202 Column, short 2 1 41204 Gas spring adjustable bracket, short 3 1 41218 Lock pin, gas spring 37 4 1 41219 Lock pin, gas spring 50 5 6 41220 Inner spacer, gas spring 6 1 41010 Seat frame pin 7 2 91049 Slide bearing, plastic, 10 14x20x10 8 6 00000.1404 Skiffy shaft lock washer A-7 11 1 41240 Gas spring tilt, short (800N) 12 2 1006788 Carriage bolt M10x50

Pos Qty Article number Description 12 Mechanical tilt Midway / Antibes (FWD) 1 1 12027 Connector bar, standard 2 2 91024 Ball joint, M8x18 (unmounted) 3 2 8600585 Threaded rod M8x135 4 2 16003 Tilt adjustment for FWD 5 2 16004 Hinge plate 6 2 11025 Collar bearing ring, 16-12-8

Pos Qty Article number Description 13 Mechanical tilt Belize / Capri / Rhino (RWD) 1 1 12027 Connector bar, standard 2 2 16010 Mount for powered tilt adjustment 3 2 16004 Hinge plate 4 2 11025 Collar bearing ring, 16-12-8 5 2 8600585 Threaded rod M8x135 6 2 91033 Decorative cap, M 8 7 2 16002 Tilt mount, mechanical, old seat frame for RWD 8 2 91024 Ball joint, M8x18 (unmounted)

Pos Qty Article number Description 14 Electrical tilt BaseOne 20 and 24" 1 1 41202 Column, short 2 2 41219 Lock pin, gas spring 50 3 8 41220 Inner spacer, gas spring 4 1 41010 Seat frame pin 5 2 91049 Slide bearing, plastic, 10 14x20x10 6 6 00000.1404 Skiffy shaft lock washer A-7 7 1 41257-A Column holder for battery bracket 8 1 41257-B Actuator holder for BaseOne powered wheelchair 9 1 16505-B Actuator, tilt, BaseOne 10 2 2361000 Fitted bolt M8 9x30

Pos Qty Article number Description 15 Electrical tilt Midway / Antibes (FWD) 1 1 16236 Subframe raise, tilt Midway 2 1 16210 Bracket, FWD, tilt/raise, left 3 1 16211 Bracket, FWD, tilt/raise, right 4 1 16105 Lower frame, raise 5 1 16106 Upper frame, raise 6 1 16118 Mounting plate, raise, FWD, right 7 1 16117 Mounting plate, raise, FWD, left 8 2 16239 Axle box, raise/tilt FWD 9 1 16125 Locking pin, raise, for mechanical tilt 10 2 16238 Bearing ring, raise/tilt FWD 11 2 16110 Raise pin, short 12 2 16111 Raise pin, long 13 4 00000.1404 Skiffy shaft lock washer A-7 14 4 8602330 Distance piece 15x8,2x6 15 1 00000.7703 Vibration damper, raise, diameter 30 16 2 2488800 Adjusting screw bzk M8x35 17 1 12027 Connector bar, standard 18 1 9002220 Pin, actuator, raise 19 1 16107 Raise V-piece 20 1 1008306 Actuator fot seat lift 21 4 91038 Ball joint, M8x30 (unmounted) 22 1 HK10001 Tilt actuator (for raise/tilt system) (94 AB 3A) 23 1 12023 Seat frame 24 2 91089 Vibration damper, diameter 20 25 2 11025 Collar bearing ring, 16-12-8 26 1 16308 Connector bar 27 1 9002219 Pin, actuator, raise 28 2 16515 Gas spring raise including ball and socket joint - 1 HK10001 Tilt actuator (for raise/tilt system) (94 AB 3A)

Pos Qty Article number Description 16 Electrical tilt Belize / Capri / Rhino (RWD) 1 1 16315 Suspension bracket, raise/tilt, RWD 2 1 16234 Subframe, raise/tilt for Belize 3 1 12029 Connector bar for raise/tilt, RWD+FWD 4 1 16105 Lower frame, raise 5 1 16106 Upper frame, raise 6 2 16110 Raise pin, short 7 2 16313 Pin, actuator, raise 8 2 16238 Bearing ring, raise/tilt FWD 9 1 16239 Axle box, raise/tilt FWD 10 1 16103 Mounting plate, raise, RWD, right 11 1 16104 Mounting plate, raise, RWD, left 12 2 16111 Raise pin, long 13 1 00000.7703 Vibration damper, raise, diameter 30 14 4 8602330 Distance piece 15x8,2x6 15 2 16215 Bearing pipe, raise/tilt 16 2 16307 Suspension arm, raise/tilt, RWD 17 1 16112 Raise end stop bracket 18 1 12019 Spring 19 1 16120 Striker, raise end stop bracket 20 1 16107 Raise V-piece 21 1 1008306 Actuator fot seat lift 22 4 91038 Ball joint, M8x30 (unmounted) 23 2 2488800 Adjusting screw bzk M8x35 24 1 HK10001 Tilt actuator (for raise/tilt system) (94 AB 3A) 25 2 16515 Gas spring raise including ball and socket joint 26 1 12023 Seat frame 27 1 16308 Connector bar 28 2 11025 Collar bearing ring, 16-12-8 29 1 9002220 Pin, actuator, raise 30 1 9002219 Pin, actuator, raise 31 4 00000.1404 Skiffy shaft lock washer A-7 32 1 1008817 Vibration damper 30*25/M8*20 - 1 HK10000 Electrical lift with electrical tilt RWD

Pos Qty Article number Description 1 1 HE10510 Headrest holder, metal sections 2 3 8600281 Knob for raise push bar/wing bolt M8 3 1 41027 Steering bracket, Kontiki 4 1 42202 Back frame for BaseOne 5 1 42201 Seat depth adjustment for BaseOne 6 1 12040 One-off adjustable backrest adjustment, inner U section 7 1 12042 One-off adjustable backrest adjustment, outer U section, for Kontiki 8 2 00000.4801 Handgrip, studded, black 9 1 42043 Handbrake grip, black 10 4 00000.7001 Nylon positioning ring, black, M5 11 1 12043 Washer plate for one-off setting of backrest adjustment 12 1 42200 Seat frame 41 1 59017 Potentiometer, external, 22 k, for Scooter and motor-assisted model 42 1 49009 Cable set for BaseOne, motor-assisted 43 1 49008 Switch for driving in reverse black/yellow 44 1 49003 Battery indicator for motor-assisted model 45 1 49002 Controller for motor-assisted model - 2 1001372 Contact key 1.4 Seating frames 17 Seating frame BaseOne

Pos Qty Article number Description 18 Seating frame Midway / Antibes / Belize / Capri 1 1 12043 Washer plate for one-off setting of backrest adjustment 2 1 12024 Seat depth adjustment 3 1 12025 Back frame 4 2 00000.7001 Nylon positioning ring, black, M5 5 1 12023 Seat frame 6 2 1043 Insert cap round 25mm 7 1 12040 One-off adjustable backrest adjustment, inner U section 8 1 12041 One-off adjustable backrest adjustment, outer U section for powered wheelchairs - 1 BA10000 Electrical backrest complete - 1 BA10002 Actuator for electrical backrest

Pos Qty Article number Description 19 Optimum Support System 30 cm Rhino 1 1 72107 OSS back holder, right 2 1 72106 OSS back holder, left 3 1 72108 OSS support holder, left 4 1 72109 OSS support holder, right 5 1 72033 Back holder, Kid-Fit, left 6 1 72034 Back holder, Kid-Fit, right 7 1 72002 Seat depth adjustment, Kid-Fit 8 2 72102 OSS hip plate, left/right 9 2 72103 OSS thoracic support plate, left/right 10 4 - Velcro hook 11 1 72105 OSS receiver tube 12 1 72101 OSS back frame 13 1 8600281 Knob for raise push bar/wing bolt M8 14 1 HE10510 Headrest holder, metal sections 15 2 91102 Plain belt 1meter 16 2 91102 Plain belt 1meter 17 2 72104 OSS shoulder plate, left/right 18 1 12043 Washer plate for one-off setting of backrest adjustment 19 1 12042 One-off adjustable backrest adjustment, outer U section, for Kontiki 20 1 12040 One-off adjustable backrest adjustment, inner U section 21 2 91102 Plain belt 1meter 22 2 72111 OSS thoracic support adjustment 23 1 72001 Seat frame, Kid-Fit

Pos Qty Article number Description 20 Optimum Support System 35 cm Rhino 1 1 72107 OSS back holder, right 2 1 72106 OSS back holder, left 3 1 72108 OSS support holder, left 4 1 72109 OSS support holder, right 5 1 72033 Back holder, Kid-Fit, left 6 1 72034 Back holder, Kid-Fit, right 7 1 72002 Seat depth adjustment, Kid-Fit 8 2 72103 OSS thoracic support plate, left/right 9 1 72105 OSS receiver tube 10 1 72101 OSS back frame 11 1 8600281 Knob for raise push bar/wing bolt M8 12 1 HE10510 Headrest holder, metal sections 13 4 91102 Plain belt 1meter 14 2 72102 OSS hip plate, left/right 15 4 - Velcro hook 16 2 72110 OSS shoulder plate, elevated, left/right 17 4 91102 Plain belt 1meter 18 1 12043 Washer plate for one-off setting of backrest adjustment 19 1 12042 One-off adjustable backrest adjustment, outer U section, for Kontiki 20 1 12040 One-off adjustable backrest adjustment, inner U section 21 2 72111 OSS thoracic support adjustment 22 4 91102 Plain belt 1meter 23 1 72001 Seat frame, Kid-Fit

Pos Qty Article number Description 21 Kid-fi t 30 cm Rhino 1 1 72033 Back holder, Kid-Fit, left 2 1 72034 Back holder, Kid-Fit, right 3 1 72002 Seat depth adjustment, Kid-Fit 4 1 72003 Back frame, Kid-Fit 5 1 12043 Washer plate for one-off setting of backrest adjustment 6 1 12046 One-off adjustable backrest, outer U section, for Kid-Fit 7 1 12040 One-off adjustable backrest adjustment, inner U section 8 2 00000.8403 Quick-locking system with cap 8mm chr 9 2 72032 Actuator holder, Kid-Fit 10 1 72037 Back mounting, lower, Kid-Fit, width 30 cm 11 1 72038 Pin, back mounting, lower, Kid-Fit, width 30 cm 12 2 91018 Bush bearing IJzk 08/12-8 13 1 72001 Seat frame, Kid-Fit

Pos Qty Article number Description 22 Kid-fi t 35 cm Rhino 1 1 72033 Back holder, Kid-Fit, left 2 1 72034 Back holder, Kid-Fit, right 3 1 72002 Seat depth adjustment, Kid-Fit 4 1 72003 Back frame, Kid-Fit 5 1 12046 One-off adjustable backrest, outer U section, for Kid-Fit 6 1 12043 Washer plate for one-off setting of backrest adjustment 7 1 12040 One-off adjustable backrest adjustment, inner U section 8 2 72032 Actuator holder, Kid-Fit 9 1 72035 Back mounting, lower, Kid-Fit, width 35 cm 10 1 72036 Pin, back mounting, lower, Kid-Fit, width 35 cm 11 2 91018 Bush bearing IJzk 08/12-8 12 2 00000.8403 Quick-locking system with cap 8mm chr 13 1 72001 Seat frame, Kid-Fit

Pos Qty Article number Description 1 2 12011 Side support 2 2 12021 Armrest width adjustment 3 2 12026 Thread block 4 4 12036 Height pin, including eyelet 5 2 12022 Support bracket, width adjustment 6 2 11030 Star knob, M10, complete 7 2 42205 Spacer plate, side shield 8 2 15501 Armrest shell 9 1 12003 Armrest mount 10 2 12031 Side cushion bracket 11 2 00000.6201 Quick-locking system D6 M6 without head 12 2 99030 Washer nylon 8,4x40 13 1 12009 Controller bracket handle 14 1 1006753 Quick-locking system with cap 4mm chr 15 1 12016 Armrest mount for controller 16 1 12014 Cap for controller bracket handle 17 1 12019 Spring 18 1 12015 Fixation U section 19 1 12010 Stop pin 20 1 12008 Controller bracket tube 21 2 12535 Side cushion plate with holes 21 2 17026 Smoked glass side shield, 8 mm + 2x M5 22 2 15201 Arm rest 23 2 15403 Side cushion - 1 AL10000 Armrest support, complete (left and right), including controller bracket - 1 12013 Remote holder for Wheelbase remote - 1 12012 Remote holder for Pilot+ remote 1.5 Armrests 23 Armrest with remote Midway / Antibes / Belize / Capri

Pos Qty Article number Description 24 Armrest PU with remote Midway / Antibes / Belize / Capri 1 1 9002788 Armrest left, PU, for BaseOne, 20-24 inch 1 1 9002789 Armrest right, PU, for BaseOne, 20-24 inch 2 2 12031 Side cushion bracket 3 1 12003 Armrest mount 4 4 12036 Height pin, including eyelet 5 10 1006754 Cupped spring washer 20x8x0,6 6 2 8600282 Ball knob M6 R/20 black 7 2 42203 Armrest release, left/right 8 2 42204 Locking plate for armrest release 9 2 12063 Side support for armrest release 10 2 42205 Spacer plate, side shield 11 2 12021 Armrest width adjustment 12 2 12022 Support bracket, width adjustment 13 2 12026 Thread block 14 2 99030 Washer nylon 8,4x40 15 1 12009 Controller bracket handle 16 1 1006753 Quick-locking system with cap 4mm chr 17 1 12016 Armrest mount for controller 18 1 12014 Cap for controller bracket handle 19 1 12019 Spring 20 1 12015 Fixation U section 21 1 12010 Stop pin 22 1 12008 Controller bracket tube 23 2 12535 Side cushion plate with holes 23 2 17026 Smoked glass side shield, 8 mm + 2x M5 24 2 15403 Side cushion

Pos Qty Article number Description 25 Armrest with remote Rhino 1 2 42203 Armrest release, left/right 2 4 72008 Bar, height adjustment for armrest, Kid-Fit 3 2 42204 Locking plate for armrest release 4 2 15407 Side cushion, Pediatric 4 2 77004 Side shield, Kid-Fit 5 2 42205 Spacer plate, side shield 6 1 12003 Armrest support 7 2 12031 Side cushion bracket 8 2 15202 Arm rest Pediatric 9 2 12021 Armrest width adjustment 10 2 12026 Thread block 11 2 12022 Support bracket, width adjustment 12 10 1006754 Cupped spring washer 20x8x0,6 13 2 8600282 Ball knob M6 R/20 black 14 2 72009-QR Side support, Kid-Fit 15 1 12009 Controller bracket handle 16 2 99030 Washer nylon 8,4x40 17 1 1006753 Quick-locking system with cap 4mm chr 18 1 12016 Armrest mount for controller 19 1 12014 Cap for controller bracket handle 20 1 12019 Spring 21 1 12015 Fixation U section 22 1 12010 Stop pin 23 1 12008 Controller bracket tube

Pos Qty Article number Description 26 Armrest without remote Midway / Antibes / Belize / Capri 1 2 12011 Side support 2 2 12021 Armrest width adjustment 3 2 12026 Thread block 4 4 12036 Height pin, including eyelet 5 2 12022 Support bracket, width adjustment 6 2 11030 Star knob, M10, complete 7 2 42205 Spacer plate, side shield 8 2 15501 Armrest shell 9 2 12003 Armrest mount 10 2 12031 Side cushion bracket 11 2 00000.6201 Quick-locking system D6 M6 without head 12 2 12535 Side cushion plate with holes 12 2 17026 Smoked glass side shield, 8 mm + 2x M5 13 2 15201 Arm rest 14 2 15403 Side cushion - 1 AL10320 Arm rest with shell, set

Pos Qty Article number Description 27 Armrest PU without remote Midway / Antibes / Belize / Capri 1 1 9002788 Armrest left, PU, for BaseOne, 20-24 inch 1 1 9002789 Armrest right, PU, for BaseOne, 20-24 inch 2 2 12031 Side cushion bracket 3 2 12003 Armrest mount 4 4 12036 Height pin, including eyelet 5 10 1006754 Cupped spring washer 20x8x0,6 6 2 8600282 Ball knob M6 R/20 black 7 2 42203 Armrest release, left/right 8 2 42204 Locking plate for armrest release 9 2 12063 Side support for armrest release 10 2 42205 Spacer plate, side shield 11 2 12021 Armrest width adjustment 12 2 12022 Support bracket, width adjustment 13 2 12026 Thread block 14 2 12535 Side cushion plate with holes 14 2 17026 Smoked glass side shield, 8 mm + 2x M5 15 2 15403 Side cushion

Pos Qty Article number Description 28 Armrest without remote Rhino 1 2 42203 Armrest release, left/right 2 4 72008 Bar, height adjustment for armrest, Kid-Fit 3 2 12003 Armrest support 4 2 15407 Side cushion, Pediatric 4 2 77004 Side shield, Kid-Fit 5 2 42204 Locking plate for armrest release 6 2 42205 Spacer plate, side shield 7 2 12031 Side cushion bracket 8 2 15202 Arm rest Pediatric 9 2 12021 Armrest width adjustment 10 2 12026 Thread block 11 2 12022 Support bracket, width adjustment 12 10 1006754 Cupped spring washer 20x8x0,6 13 2 8600282 Ball knob M6 R/20 black 14 2 72009-QR Side support, Kid-Fit

Pos Qty Article number Description 1 1 14003 Upper tube standard leg rest, left 1 1 14004 Upper tube standard leg rest, right 2 1 14005 Leg rest release lever, left 2 1 14006 Leg rest release lever, right 3 1 14011 Spring release lever, left 3 1 14014 Spring release lever, right 4 1 14007 Lower tube, leg rest 5 1 14013 Heel loop (without nuts and bolts) 6 1 14009 Ankle hinge 7 1 14008 Footplate 8 1 91039 Vibration damper, M4x13 9 1 8049150 Insert cap, fl at, oval, 30x15 10 2 91065 Decorative plug, 8.5x12x8 11 1 8600620 Bling rivet nut M8 - 1 BS10000L Standard leg rest left - 1 BS10000R Standard leg rest right - 1 BS10000 Standard leg rest set - 1 1008816 Heel loop including mounting material - 1 BS30012L Leg rest lower tube, including footplate without heel loop, left - 1 BS30012R Leg rest lower tube, including footplate without heel loop, right 1.6 Legrests 29 Standard legrest

Pos Qty Article number Description 30 Standard legrest with calf plate 1 1 14026 Hinge, calf support 2 1 14005 Leg rest release lever, left 2 1 14006 Leg rest release lever, right 3 1 14027 Calf support bracket 4 1 91039 Vibration damper, M4x13 5 1 14011 Spring release lever, left 5 1 14014 Spring release lever, right 6 1 14009 Ankle hinge 7 1 99030 Washer nylon 8,4x40 8 1 14007 Lower tube, leg rest 9 1 14008 Footplate 10 1 14045 Standard leg rest+ calf support mount, left 10 1 14046 Standard leg rest+ calf support mount, right 11 1 8600620 Bling rivet nut M8 12 1 8049150 Insert cap, fl at, oval, 30x15 - 1 BS10002 Standard legrests, incl. footplates with ankle hinges and calf supports

Pos Qty Article number Description 31 Hockey legrest 1 1 14004 Upper tube standard leg rest, right 2 1 14006 Leg rest release lever, right 3 1 14014 Spring release lever, right 4 2 91039 Vibration damper, M4x13 5 2 8600620 Bling rivet nut M8 6 1 14003 Upper tube standard leg rest, left 7 1 14005 Leg rest release lever, left 8 1 14011 Spring release lever, left 9 4 91078 Tube clamp, bracket, aluminium, 22 inch, black 10 2 14044 Mount for hockey foot bracket 11 1 14043 Hockey foot bracket 12 2 00000.9002 Insert cap, round 22 black

Pos Qty Article number Description 32 Comfort legrest 1 1 14007 Lower tube, leg rest 2 1 14005 Leg rest release lever, left 2 1 14006 Leg rest release lever, right 3 1 14036 Operating lever for comfort leg rest 4 1 14015 Leg rest head for comfort leg rest, left 4 1 14016 Leg rest head for comfort leg rest, right 5 1 91025 Gas spring for comfort leg rest 6 1 14011 Spring release lever, left 6 1 14014 Spring release lever, right 7 1 91040 Control block, gas spring, right-angled (excluding lever and knob) 8 1 14008 Footplate 9 1 14009 Ankle hinge 10 1 14023 Cap, comfort leg rest 11 1 14026 Hinge, calf support 12 1 14027 Calf support bracket 13 1 001.14080.002 Fork, M8x16 14 1 91039 Vibration damper, M4x13 15 1 8600282 Ball knob M6 R/20 black 16 1 99030 Washer nylon 8,4x40 17 2 91046 Fixing ring 18 1 8049150 Insert cap, fl at, oval, 30x15 19 2 91065 Decorative plug, 8.5x12x8 20 1 8600620 Bling rivet nut M8 21 1 14029 Upper tube, comfort leg rest, left 21 1 14030 Upper tube, comfort leg rest, right 22 2 00000.7001 Plastic Washer M5 - 1 BS10322L Comfort leg rest left - 1 BS10322R Comfort leg rest right - 1 BS10322 Comfort leg rest set

Pos Qty Article number Description 33 Comfort legrest seat width 55 cm 1 1 14007 Lower tube, leg rest 2 1 14005 Leg rest release lever, left 2 1 14006 Leg rest release lever, right 3 1 14036 Operating lever for comfort leg rest 4 1 14015 Leg rest head for comfort leg rest, left 4 1 14016 Leg rest head for comfort leg rest, right 5 1 91025 Gas spring for comfort leg rest 6 1 14011 Spring release lever, left 6 1 14014 Spring release lever, right 7 1 91040 Control block, gas spring, right-angled (excluding lever and knob) 8 1 14009 Ankle hinge 9 1 14023 Cap, comfort leg rest 10 1 14026 Hinge, calf support 11 1 14027 Calf support bracket 12 1 001.14080.002 Fork, M8x16 13 1 91039 Vibration damper, M4x13 14 1 8600282 Ball knob M6 R/20 black 15 1 99030 Washer nylon 8,4x40 16 2 91046 Fixing ring 17 1 8049150 Insert cap, fl at, oval, 30x15 18 2 91065 Decorative plug, 8.5x12x8 19 1 8600620 Bling rivet nut M8 20 1 14029 Upper tube, comfort leg rest, left 20 1 14030 Upper tube, comfort leg rest, right 21 2 00000.7001 Plastic Washer M5 22 1 84043 Footplate holder for Atlantic/Pacifi c, left,/right 23 1 14053 Footplate connecting to seat width 55 cm

Pos Qty Article number Description 34 Electrical legrest 1 1 14029 Upper tube, comfort leg rest, left 1 1 14030 Upper tube, comfort leg rest, right 2 1 14031 Leg rest head, powered leg rest, left 2 1 14032 Leg rest head, powered leg rest, right 3 1 14007 Lower tube, leg rest 4 1 14037 Cover plate for powered leg rest 5 1 14009 Ankle hinge 6 1 14008 Footplate 7 1 14011 Spring release lever, left 7 1 14014 Spring release lever, right 8 1 14042 Cap, powered leg rest 9 1 14027 Calf support bracket 10 1 16504 Actuator, leg adjustment, left or right 11 1 14005 Leg rest release lever, left 11 1 14006 Leg rest release lever, right 12 1 14026 Hinge, calf support 13 1 14034L Cable set, leg rest left 13 1 14034R Cable set, leg rest right 14 2 91046 Fixing ring 15 1 91039 Vibration damper, M4x13 16 1 91064 Spacer, 6.2x10x10 17 1 99030 Washer nylon 8,4x40 18 1 8049150 Insert cap, fl at, oval, 30x15 19 2 91065 Decorative plug, 8.5x12x8 20 2 00000.7001 Nylon positioning ring, black, M5 21 1 BS30020L Leg rest bracket, angle adjustable, for powered leg rest, left 21 1 BS30020R Leg rest bracket, angle adjustable, for powered leg rest, right 22 2 8600620 Bling rivet nut M8 - 1 BS10320L Electrical leg rest left - 1 BS10320R Electrical leg rest right - 1 BS10320 Electrical leg rest set

Pos Qty Article number Description 35 Electrical legrest seat width 55 cm 1 1 14029 Upper tube, comfort leg rest, left 1 1 14030 Upper tube, comfort leg rest, right 2 1 14031 Leg rest head, powered leg rest, left 2 1 14032 Leg rest head, powered leg rest, right 3 1 14007 Lower tube, leg rest 4 1 14037 Cover plate for powered leg rest 5 1 14009 Ankle hinge 6 1 14011 Spring release lever, left 6 1 14014 Spring release lever, right 7 1 14042 Cap, powered leg rest 8 1 14027 Calf support bracket 9 1 16504 Actuator, leg adjustment, left or right 10 1 91039 Vibration damper, M4x13 11 1 14005 Leg rest release lever, left 11 1 14006 Leg rest release lever, right 12 1 14026 Hinge, calf support 13 1 14034L Cable set, leg rest left 13 1 14034R Cable set, leg rest right 14 2 91046 Fixing ring 15 1 91064 Spacer, 6.2x10x10 16 1 99030 Washer nylon 8,4x40 17 1 8600620 Bling rivet nut M8 18 1 8049150 Insert cap, fl at, oval, 30x15 19 2 91065 Decorative plug, 8.5x12x8 20 2 00000.7001 Nylon positioning ring, black, M5 21 1 BS30020L Leg rest bracket, angle adjustable, for powered leg rest, left 21 1 BS30020R Leg rest bracket, angle adjustable, for powered leg rest, right 22 1 84043 Footplate holder for Atlantic/Pacifi c, left,/right 23 1 14053 Footplate connecting to seat width 55 cm

Pos Qty Article number Description 36 Central legrest BaseOne 1 1 44101 Upper tube, single central leg rest, tilt wheelchair 2 1 44102 Lower tube, single central leg rest, tilt wheelchair 2 1 44102-S Lower tube for single central leg rest, short 3 1 44105 Frame holder for single central foot rest 4 1 44100 Spring-lock device 5 1 44103 Interlocking plate 6 1 45401 Calf plate trapezium 7 2 74025 Footplate bracket for single central leg rest, Hippo 8 1 44100-K Shaft for spring lock device 9 1 44013 Aluminium footplate for single central leg rest for tilt wheelchair 10 2 44104-A Taper nut 11 1 44104R Hinge part, moveable, right, BaseOne 12 1 44004R Hinge, single central leg rest, right 13 1 44004L Hinge, single central leg rest, left 14 1 44104L Hinge part, moveable, left, BaseOne 15 1 1006781 Wing bolt 50mm 16 2 00000.1404 Shaft lock washer 7mm - 1 BS48000 Single central leg rest, mechanical, with calf support pad

Pos Qty Article number Description 37 Central legrest 5 cm shortened BaseOne 1 1 44101 Upper tube, single central leg rest, tilt wheelchair 2 1 44102-S Lower tube for single central leg rest, short 3 1 44105 Frame holder for single central foot rest 4 1 44100 Spring-lock device 5 1 44103 Interlocking plate 6 1 45401 Calf plate trapezium 7 2 74025 Footplate bracket for single central leg rest, Hippo 8 1 44100-K Shaft for spring lock device 9 1 44013 Aluminium footplate for single central leg rest for tilt wheelchair 10 2 44104-A Taper nut 11 1 44104R Hinge part, moveable, right, BaseOne 12 1 44004R Hinge, single central leg rest, right 13 1 44004L Hinge, single central leg rest, left 14 1 44104L Hinge part, moveable, left, BaseOne 15 1 1006781 Wing bolt 50mm 16 2 00000.1404 Shaft lock washer 7mm 17 1 44107 Bracket calf adjustment for single central leg rest - 1 BS48005 Single central leg rest, mechanical, with calf support pad, shortened by 5 cm

Pos Qty Article number Description 38 Central legrest Midway / Antibes / Belize / Capri / Rhino 1 1 14114 Upper tube for single central mechanical leg rest 2 2 14115 Bracket for single central mechanical leg rest (Kid-Fit) 3 1 44002 Lower tube, central legrest 4 1 44010 Stop plate 5 1 14120 Pin mount for single central mechanical leg rest 6 1 14010 Footplate, single central leg rest 7 2 00000.8404 Quick-locking system with cap 10mm chr 8 2 91049 Slide bearing, plastic, 10 14x20x10 9 4 8048900 Insert cap 20x20 10 2 00000.5002 Bearing bush nylon 8x11x13 mm 11 2 44003 Foot plate holder 12 2 5643346 Blind rivet nut M6x17,5 13 2 8800855 Blind rivet nut M8x16 - 1 BS14000 Single central leg rest, right-angled, mechanical

Pos Qty Article number Description 39 Central legrest with calf plate Midway / Antibes / Belize / Capri / Rhino 7 1 44009 Footplate, single central leg rest, Kontiki 8 1 45401 Calf plate trapezium 9 4 8048900 Insert cap 20x20 10 4 00000.5002 Bearing bush nylon 8x11x13 mm 13 1 44004R Hinge, single central leg rest, right 14 1 44004L Hinge, single central leg rest, left 18 2 44003 Foot plate holder 19 1 44010 Stop plate

Pos Qty Article number Description 40 Central legrest electrical Midway / Antibes / Belize / Capri / Rhino 1 1 14144 Corner piece for single central powered leg rest, right 2 1 14143 Corner piece for single central powered leg rest, left 3 2 14145 Plastic guiding profi le for powered single central leg rest 4 2 14146 Stainless steel guiding profi le 5 1 14117 Belt guidance pin 6 1 14118 Pin, footplate for single central powered leg rest 7 1 14147 Mounting pin 8 1 14148 Footrest mount 9 1 16303 Motor, single central leg rest 10 1 14104 Drum for single central powered leg rest 11 1 14107 Mounting bar for single central powered leg rest, seat width 45 cm 12 1 91018 Bush bearing IJzk 08/12-8 13 2 015.02000.001 Slide bearing, plastic, 10 13*18*8 14 1 14500 Hinge pin + lock nut 15 2 00000.2402 Collar 20x10 L=10 16 1 14101 Stainless steel footplate for single central powered leg rest 17 1 16505 Actuator, angle adjustment for single central leg rest 18 1 16122 Locking pin, raise/tilt for actuator 19 2 00000.1404 Skiffy shaft lock washer A-7 20 1 14111 Hinge section for single central powered leg rest, right 21 1 14110 Hinge section for single central powered leg rest, left 22 1 14123 U-actuator, angle adjustment for single central leg rest 23 1 14108 Rolling hoop for electrical footplate, 40x2x2 24 2 14103 Hinge section, moving, single central powered leg rest 25 1 7000048 Current limitor central legrest 26 1 12047 Seat frame for single central powered leg rest 27 2 00000.9206 Rectangular cap black 20x30 - 1 BS16000 Single central leg rest, with powered angle and length adjustment

Pos Qty Article number Description 41 Central legrest electrical angle adjustable Midway / Antibes / Belize / Capri / Rhino 1 1 12047 Seat frame for single central powered leg rest 2 1 14050 Bar, single central leg rest + powered angle adjustment 3 1 14010 Footplate, single central leg rest 4 1 44002 Lower tube, central legrest 5 1 44010 Stop plate 6 2 44003 Foot plate holder 7 4 8048900 Insert cap 20x20 8 2 00000.5002 Bearing bush nylon 8x11x13 mm 9 1 16505 Actuator, angle adjustment for single central leg rest 10 1 14123 U-actuator, angle adjustment for single central leg rest 11 1 16122 Locking pin, raise/tilt for actuator 12 2 00000.1404 Skiffy shaft lock washer A-7 13 1 14110 Hinge section for single central powered leg rest, left 14 1 14111 Hinge section for single central powered leg rest, right 15 2 14103 Hinge section, moving, single central powered leg rest - 1 14108 Strap for central legrest

Pos Qty Article number Description 42 Legrest holder 1 1 14903 Mounting plate, leg rest bracket, powered adjustment, left 1 1 14904 Mounting plate, leg rest bracket, powered adjustment, right 2 2 14500 Hinge pin + lock nut 3 1 91077 Spacer bushing, 6.2x10.5 4 1 91035 Fork, M6x12 with 1 x diameter 10.1 5 1 14901 Adjustable leg rest bracket, left 5 1 14902 Adjustable leg rest bracket, right 6 1 8741160 Flat nut M6 - 1 BS30010L Leg rest bracket, one-off adjustment, left - 1 BS30010R Leg rest bracket, one-off adjustment, right

Pos Qty Article number Description 43 Legrest holder electrical 1 2 14500 Hinge pin + lock nut 2 1 91077 Spacer bushing, 6.2x10.5 3 1 91035 Fork, M6x12 with 1 x diameter 10.1 4 1 14035L Cable set, leg rest bracket left 4 1 14035R Cable set, leg rest bracket right 5 1 8741160 Flat nut M6 6 1 14901 Adjustable leg rest bracket, left 6 1 14902 Adjustable leg rest bracket, right 7 1 14905 Mounting plate, powered leg rest bracket, left 7 1 14906 Mounting plate, powered leg rest bracket, right - 1 BS30020L Legrest bracket complete, left - 1 BS30020R Legrest bracket complete, right

Pos Qty Article number Description 44 Mounting plate for legrest holder 1 2 14500 Hinge pin + lock nut 2 1 14033 Leg rest contact for mounting on leg rest bracket 3 1 8741160 Flat nut M6 4 1 14905 Mounting plate, powered leg rest bracket, left 4 1 14906 Mounting plate, powered leg rest bracket, right - 1 BS30024L Mounting plate, electrical leg rest bracket, including hinge pin, left - 1 BS30024R Mounting plate, electrical leg rest bracket, including hinge pin, right

Warranty | 53 2 Warranty 2.1 Defi nitions of terms Defi nitions of terms used in this warranty: • Consumable part: Part that is subjected to natural wear and tear or natural contamination during normal operation within the lifetime of the product (section 9 of Handicare’s general terms and conditions of sale); • Client: Those who purchase the product directly from Handicare; • Corrective action: Repair, replace or refund of the product; • Dealer: Those who re-sell the product to the User; • Defect: Any circumstance due to which the product is not sound or fi t to use, caused by a lack of quality of the material used to manufacture the product as well as the quality of the manufacturing process; • Option: An accessory delivered by Handicare to extend the standard product model; • Product: Product that is delivered according to brochure or contract (e.g. wheelchair, scooter, battery-charger etc.); • Part: Part of product that can be exchanged or replaced. This can be an option, accessory, service part or consumable part; • Returns: Product or part that needs to be returned; • RMA-process: Process to return goods, contact Handicare’s Customer Service; • Service part: Part that is durable and may be subjected to natural wear and tear or natural contamination during normal operation within the lifetime of the product.; • User: Those who use the product; • Warranty: The rights and obligations set forth in this document; • Warranty period: The period of time during which the warranty is valid; • Warranty provider: Handicare B.V., Vossenbeemd 104, 5705 CL Helmond, The Netherlands. Notwithstanding the rights and obligations of Handicare, Client and User set forth in Handicare’s general terms and conditions of sale, the rights of the Client and/or User towards Handicare in case of defects are limited to the provisions set forth in this warranty. For the duration of the warranty period Handicare guarantees that the product is without defects. In case of any defects the User is required –within two weeks after discovery of the defect- to contact the dealer. He has to complete a return form and return the product or part via the RMA-process. Handicare will, at its sole discretion, take the corrective action it seems fi t under the given circumstances within a reasonable period of time (depends on nature of claim) from receipt of the completed return form. The warranty period will not be extended after a corrective action. 2.2 Warranty period table Power wheelchairs / scooters Description Warranty period Examples include, but are not limited to the parts mentioned below Frame 2 years Weldment/frame Drive system 1 year Transaxle, motor, motor brake Electronics 1 year Controller, controlling mechanism, wiring harness, electronic components Service Parts New: 1 year after invoice Repaired: 90 days after invoice Brakes Consumable parts 40 days after invoice Wheels, push handles etc. Options/Accessories 2 years Mirror, mudguards etc. Not being service part or consumable part. Handicare will only accept shipment costs and corrective costs related to warranty on equipment during the warranty period. This warranty will void in case of: • The product and/or its parts being modifi ed or items having been added by others than Handicare; • Changes in cosmetic appearance by use; • Failure to observe the instructions for use and maintenance, use other than normal use, wear and tear, negligence, collateral damage by neglect of earlier symptoms, overloading, third-party accidents, non-original parts used and defects not caused by the product; • Circumstances beyond our control (fl ood, fi re, etc.). This warranty does not cover: • Tyres and inner tubes • Batteries (covered by the battery manufacturer’s warranty). Clients and/or Users have legal (statutory) rights under applicable national laws relating to the sale of consumer products. This warranty does not affect statutory rights you may have nor those rights that cannot be excluded or limited, nor rights against the entity from whom the product was purchased. Clients may assert any rights they have at their sole discretion.

Deleted Base One elro exploded views 14 08 Added article numbers 91127, 1003243, 1003242, 1011125 and 1011124 16 09 Added article numbers 91127, 1003243, 1003242, 1011125 and 1011124 49 41 Changed position number 14 into 10 and adapted current position numbering 10 till 13 by increasing with 1 2015-V1 5 1 • Changed description article number 410431 • Added article number AC40106 6 2 • Added article numbers AC40200 and 41043 • Changed article number 8047600 into 00000.4901 7 3 Added article number 41205 8 4 Added article numbers 41205, 41230 and 41234 10 5 • Changed article numbers 1008814 and 1008815 into 1015258 and 1015259 • Added article numbers 1015118 and 1015112 12 6 • Deleted article number 11001-grijs • Changed article number and description position 8 into 8744990 'Insert cap, diameter 38' • Changed article numbers 1006636, 1006638, 1006635, 1006637, 9002251, 9002252, 1008812, 1008813, 1008814 and 1008815 into 1015234, 1015236, 1015235, 1015237, 1015242, 1015243, 1015252, 1015253, 1015258 and 1015259 • Changed article number 101124 into 1011124 • Added version data to article numbers 1003243, 1003242, 1011125 and 1011124 • Added article numbers VL10040, 8600283, 11014, 9002006, 91124, SP20019, 99120, 99117, 1015115, 1015105, 1015116, 1015107, 1015117, 1015111, 1015118 and 1015112 13 7 • Deleted article number 11001-grijs • Changed article number and description position 10 into 8744990 'Insert cap, diameter 38' • Changed article numbers 1006636, 1006638, 1006635, 1006637, 9002251, 9002252, 1008812, 1008813, 1008814 and 1008815 into 1015234, 1015236, 1015235, 1015237, 1015242, 1015243, 1015252, 1015253, 1015258 and 1015259 • Changed article number 101124 into 1011124 • Added version data to article numbers 1003243, 1003242, 1011125 and 1011124 • Added article numbers VL10040, 11014, 9002006, 91124, SP20019, 99120, 99117, 91003, 1015115, 1015105, 1015116, 1015107, 1015117, 1015111, 1015118 and 1015112 14 8 Added article numbers 99008, 99009 and 29521 16 9 • Exchanged descriptions 7000019 (was right) and 7000020 (was left). 7000019 is left and 7000020 is right • Added article numbers 99033, LI10035, LI10000 and 29520 17 10 Changed description article number 41239 into Gas spring tilt, long (800N 17cm) 18 11 Changed description article number 41240 into Gas spring tilt, short (800N) 22 15 • Added article number HK10001 • Changed article number 91087 and 16503 into 00000.7703 and HK10001 23 16 • Added article number HK10000 • Changed article number 16503 into HK10001 24 17 • Deleted article number 42047 • Added article number 1001372 25 18 Added article numbers BA10000 and BA10002 30 23 • Added article numbers AL10000, 12013 and 12012 • Changed article number 12035 and 15401 into 12535 and 15501 31 24 Changed article number 12035 into 12535 33 26 • Added article number AL10320 • Changed article number 12035 and 15401 into 12535 and 15501 34 27 Changed article number 12035 into 12535 36 29 • Changed description article number 14013 into Heel loop (without nuts and bolts) • Added article numbers 1008816, BS30012L and BS30012R 37 30 Added article number BS10002 45 38 Changed article number 91031 into 00000.5002 46 39 • Deleted article numbers 44011, 44005, 44007, 44008, 3133450, 8754170 and 472030 • Changed article number 91031 into 00000.5002 48 41 • Changed article number 91031 into 00000.5002 • Added article number 14108 50 43 Added article numbers BS30020L and BS30020R 53 Updated warranty text