Fujitsu FI-4860C2 Cleaning Instructions

Pull up the lever on the right front of the upper transport and raise it. Pad Assy Guide Plate Pull the ADF release lever towards you and lift up the ADF upper sheet guide. Press down on the upper part of the guide plate with your fingers at the two positions shown, rotate the plate towards you and remove it. Wipe the translucent rubber part of the pad ASSY using cleaning paper moistened with cleaner F1. Cleaning the Pad - Recommended Cleaning Cycle Every 300,000 Sheets Parts Part Number Pad CA04315-G730 Pick Roller CA03296-F711 Brake Roller CA04315-F705 Cleaning Kit SC-CLE-KIT2 Note: Please ensure Cleaner F2 is NOT used on Rubber Rollers. Cleaning Instructions for fi-4860C2 Scanner ADF Upper Sheet Guide ADF Release Lever Pad (Cleaning Area) Pad Assy Guide Plate Pick Roller Unit Ring Shaft Ring Ring Pick Roller Unit Separation Roller While pulling the ADF lever towards you, lift up the ADF upper sheet guide. Slide the Pick Roller unit to the left to disengage the clutch ring from the shaft. Wipe both Pick Rollers (2 positions) and the Separation Roller using cleaning paper moistened with F1 cleaner. Cleaning the Pick Roller - Recommended Cleaning Cycle Every 300,000 Sheets 1 2 3 1 2 3 For further cleaning instructions please refer to the fi-4860C2 Image Scanner Operators Guide which can be found on our Website: www.fel.fujitsu.com/scanner

Pad Assy Guide Plate Brake Roller Bail While pulling the ADF lever towards you, lift up the ADF upper sheet guide. Pressing down on the upper part of the Guide Plate with your fingers, pull the plate towards you to remove. Cleaning the Brake Rollers - Recommended Cleaning Cycle Every 300,000 Sheets Lift the bail of the Brake Roller upwards and release the lock. Pull the Brake Roller forward to remove it. Wipe roller surface using cleaning paper moistened with cleaner F1. Brake Roller Feed Rollers (in 12 locations) Wipe the metal feed rollers using a lint free cloth moistened with cleaner F2. Wipe the rollers thoroughly. If the rollers have black build up, feed reliability will be affected Cleaning the Feed Rollers - Recommended Cleaning Cycle Every 300,000 Sheets Use your index fingers to lift both ends of the removable sheet guide. Lift right side first. Shift the sheet guide to the left while lifting up to remove. Removable Sheet Guide Wipe both sides of the glass surface using a cleaning paper moistened with cleaner F1. 2 3 Cleaning the Glass Surface - Recommended Cleaning Cycle Every 200,000 Sheets 1 2 3 Glass Sheet Guide Glass Sheet Guide Tab Push down on the Glass Sheet Guide tab to open. Wipe Glass Sheet Guide using a cleaning paper moistened with cleaner Cleaning the Glass Sheet Guide - Recommended Cleaning Cycle Every 200,000 Sheets 1 2 1 January 2007