ICS ELECTRONICS 9099 Instruction Manual

Any modified configuration settings will be restored to default settings. struct Reload_Config_Resp { unsigned int error; }; Reload_Config_Resp reload_config (void) = 20; If the RPC message is of insufficient length to satisfy the required length, an error value of 1 is returned. The returned Reload_Config_Resp.error value determines whether the default configuration was reloaded. error Meaning 0 No error 1 Syntax error ...

by the VXI-11 abort channel. struct Abort_Port_Parms { unsigned int action; unsigned int port; }; struct Abort_Port_Resp { unsigned int error; unsigned int port; }; Abort_Port_Resp abort_port_number (Abort_Port_Parms) = 4; The action value determines whether the client wishes to execute a read of the current setting, or a modification of the current value. action = 0 = read of current value action = 1 = modify current value If the action value is other than 0 or 1, then an error value of 5 i ...

reply and then (if the status is No Error) execute the action. All Edevice configuration commands will reply with statuses corresponding to Error Codes as defined by the VXI-11 (section B.5.2). All Edevice configuration command data will use XDR encoding. Numeri- cal values will be of 4-byte unsigned integer format. String and binary fields will be of opaque array format. Variable length string values will be NULL terminated and will contain a leading length numerical value defining the total length (inclusive o ...

includes the wait-for-lock-release time and the delays in the module. In the case of the 9099 this also includes the modbus serial timeout value set by the D command. The VISA communication or RPC network timeouts are long timeouts designed to catch network failures. COMM_Timeout is unique to ICS VXI-11 devices and refers to the time the device's service will go without getting a message from the other party before declaring the link dead. KeepAlive is a background function of the device’s TCP/IP Stack to ch ...

the 9009 is ready for the next command. Recom- mended for computer operation. Value is 1(On) | 0(Off). :ERRor? 0, “No Requests next entry in 9099's error error” queue. Error messages are: 0, “no error” -100, “Command error” -200, “Execution error” -400, “Query error” :VERSion? 1994.0 Returns the of the applicable SCPI version number. STATus - Starts the Status Reporting Structure Branch :OPERation - Identifies Operation registers. :QUEStionable - Identifies Questionable registers. [:EVENt?] Re ...

The 9009 and 9099's firmware can be updated in the field without returning the unit to the factory. 1. Link to ICS Electronics website at http://www.icselect.com. Click on Downloads and select 90xx Product Updates. Locate the latest ICS_9099_ Update file. Download the .zip file to an temporary directory and unzip the file. 2. Connect the 9099 to a Windows PC as described in paragraph 2.6.1 and turn it on. 3. If the PC is already set to communicate with the 9099 skip this step. Else, disconnect the PC from your company network and change its Local Area Netw ...

1.4.1 RPC Protocol The RPC protocol conforms to ONC RPC Version 2. 1.4.2 Sockets The 9099's VXI-11 service supports 15 TCP/IP sockets for client communica- tion with a maximum of 4 active sockets. The sockets are normally opened and closed by the clients. The unit will close the socket and release all resources if a broken connection is detected or when the link count goes to zero if Auto Disconnect is enabled. There is a separate socket for UDP RPC Port Mapper communication. 1.4.3 Channels Supports Core, Abort a ...