JMD Assistant Operation & User’s Manual

JMD Assistant is an OBD model to help HandyBaby to read out data from Volkswagen cars, and it needs your HandyBaby upgrade to at least version 8.0.0. JMD Assistant reads data from Volkswagen cars only and won’t write any data to cars, even in all key lost , so it won’t be locked when the car connect to the server in 4S. HandyBaby read ...

Step 5: Assistant read Step 6: Push OK ” OK TO READ” Step 7: Read Success by OBD data Step 8: Insert original key push OK ...

Step 11: Copy more? Step 12: New JMD48 chip push OK New key clone (The case all key lost): Tham same above Step1 to Step5 ….. continue Step6 Step 6: Assistant read push OK Step 7: Copy by JMD48 chip ...

Attation: If fail in reading, make sure you have follow the steps above and check the car is supported(see the list), or contact us How could update new version JMD Assistant connect to computer with USB cable, and open JMD Client software, click “UPDATES” –“JMD Assistant update ...

internet, and you should turn off Anti-virus and defender during update. Information about JMD Assitant JMD Assistant HandyBaby’s coil , and get into” basic-info” menu, wait several seconds and press OK to read, it will show information of JMD Assistant. 0% Start 100% Finish ...

smart phone. During charge , LED shows read, and shows blue in full charging. Support list (Clone only) More cars will be add in the future version, please put eyes on the latest news. Note: some cars are not support in the next half year of 2015 in the list, and blad ...

Support list (all key lost) More cars will be add in the future version, please put eyes on the latest news. Q&A Q：The dashboard off and can not light up again. A： For the wrong operations and other reasons, the dashboard can’t light up again, please pull out JMD Assistant and insert key and twist to II again, or cut off the batt ...

A：You can erase fault codes with OBD diagnosis device, if can’t , drive the car for a distance , it will be erased Q：There is a wrong sound from JMD Assistant after reading A：Check the car if support or not, and make sure your JMD Assistant in the latest version, if so, try again. For fail a ...