Fimap MMg Series Use And Maintenance Manual

information carefully and take the necessary precautions to protect any people and/or objects that may be present. Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full cooperation of the person directly responsible for the machine's operation. Most accidents that occur at the workplace, during work activities, or while in transit, are caused by the failure to respect the most basic safety regulations. An attentive, careful op ...

Proceed as follows to empty the solution tank: 1. Take the machine to the maintenance area. 2. Make sure the machine has been secured (see the section titled “SECURING THE MACHINE”). CAUTION: users are advised to always wear protective gloves, to avoid the risk of serious injury to hands. 1. Open the tap's output flow to maximum, and shift the knob on the left hand side of the steering column (1) (Fig.1) upward. 2. Unscrew the cap (2) for the solution tank dumping system (Fig.2); the cap is located at the rear of the machine. NOTE: the place designated for thi ...

Proceed as follows to empty the solution tank: 1. Take the machine to the maintenance area. 2. Make sure the machine has been secured (see the section titled “SECURING THE MACHINE”). CAUTION: users are advised to always wear protective gloves, to avoid the risk of serious injury to hands. 1. Open the tap's output flow to maximum, and shift the knob on the left hand side of the steering column (1) (Fig.1) upward. 2. Unscrew the cap (2) for the solution tank dumping system (Fig.2); the cap is located at the rear of the machine. NOTE: the place designated for thi ...

Careful cleaning of the brush guarantees better cleaning of the floor as well as a longer brush head gearmotor lifespan. To clean the brush, proceed as follows: 1. Take the machine to the maintenance area. 2. Make sure the machine has been secured (see the section titled “SECURING THE MACHINE”). CAUTION: these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal objects. 3. Open the machine's right later carter (1) (Fig.1). 4. Move the brush release lever downwards (2) (Fig.2). ...

Tel. +39 045 6060411 – Fax +39 045 6060417 – E-mail:[email protected] www.fimap.com ...

• Be careful to avoid collisions with shelving or scaffolding, above all if there is a risk of objects falling from heights. • Do not place any liquid containers on the machine. • The machine must only be used under temperature conditions ranging from 0 °C to +40 °C. • The machine must only be stored under temperature conditions ranging from 0 °C to +40 °C. • The humidity level must be between 30% and 95%. • When using detergents to clean the flooring, always follow the instructions and respect the warnings indicated on the containers' labels. ...