Dynacord DCS 407R Datasheet

DCS 407R www.dynacord.com ▪ 4 low frequency relays, 2 switch contacts each. ▪ Gold-plated double contacts for high level of contact reliability. ▪ Pluggable connection terminals with screwed flange for all contacts and coils. ▪ 4 relay control LEDs. The module is fitted on the back of the DCS 400 rack plug-in board. The module is used to switch audio signals (line levels) or for control purposes regardless of the DCS 400 system. Additional properties: • Configure the audio distributor by separating the wire jumpers. • A monitor bus can be connected. Parts included No. Component 1 DCS 407R 2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839) Technical specifications Operating voltage 24 V DC, -10%/+30% Operating current • Standby 24 V, 5.5 mA, 0.14 W • Idle/Announcement/Alert 24 V, 42 mA, 1.01 W Electromagnetical environment E1, E2, E3 Operating temperature -5 °C to 45 °C Product dimensions (Width by Height by Depth) 37.5 by 80.6 by 245 mm Net weight 163 g Relay contacts • Contacts 2 SPDT • Contact material AgPd + 10μ Au • Contact load (real) 1 A / 24 V DC 0.5 A / 120 V DC • Contact current max. 2 A

CLK1 CLK1_A CLK2 CLK2_A CLK3 CLK3_A RES RES_A *RES *RES_A DATA1 DATA1_A DATA2 DATA2_A DATA3 DATA3_A DATA4_A DATA5 DATA5_A DATA_SEL EN1 EN1_A EN2 EN2_A EN3 EN3_A EN4 EN4_A EN5 EN5_A EN6 EN6_A EN7 EN7_A EN8 EN8_A +24V GND MON+ MON- DATA4_SEL_A Block diagram Installation/configuration notes Installation information On the DCS 400 rack plug-in board, slots 1–10 must be occupied in ascending sequence (left to right) without any gaps. Different module types can otherwise be arranged in any sequence. Exception: Slot 1 (far left) must always be occupied with a DCS 801R control module or DCS 405R extension module. When assembling the device and installing the connections, please comply with the standards VDE 0100 and EN 60065. Connector The scope of delivery for the device includes two 15- pin connectors. Conductor cross-sections of 0.14 mm² (AWG26) to 1.5 mm² (AWG16) can be used. Recommended connecting cable: flexible CU strand, LiY, 0.75 mm². Certifications and approvals Status as of November 2012: • EN 50130-4 • EN 54-16 • EN 55103-1 • EN 55103-2 Ordering information DCS 407R Order number F01U121782 2 | DCS 407R

Represented by: Germany: EVI Audio GmbH Sachsenring 60 94315 Straubing Germany www.dynacord.com © Bosch Security Systems 2013 | Data subject to change without notice Document Number | Vs1 | 19. Mar 2013