Garmin GRA 5500 Installation Manual

Revision A Page C-2 APPENDIX C Interconnect Examples Figure C-2 Garmin Integrated Flight Deck Interconnect Example GRA 5500 RADAR ALTIMETER P55001 46 RS422 IN 1 A 35 RS422 IN 1 B 24 RS422 OUT 1 A 23 RS422 OUT 1 B GSD 41 DATA CONCENTRATOR P412 S S 9 10 7 8 MAIN2 RS-485/RS-422 4 A MAIN2 RS-485/RS-422 4 B MAIN2 RS-485/RS-422 5 A MAIN2 RS-485/RS-422 5 B 25 RS422 IN 2 A 18 RS422 IN 2 B 38 RS422 OUT 2 A 42 RS422 OUT 2 B GIA 63 INTEGRATED AVIONICS UNIT P603 S S 27 28 36 37 RS-485 5 A/RS-422 OUT A RS-485 5 B/RS-422 OUT B RS-485 3 A/RS-422 IN A RS-485 3 B/RS-42 ...

190-01277-00 Page A-8 Revision A This page intentionally left blank DRAFT ...

190-01277-00 Page viii Rev. A LIST OF TABLES TABLE PAGE Section 1 GENERAL DESCRIPTION .............................................................1-1 Table 1-1 Physical Characteristics......................................................................................... 1-2 Table 1-2 General Specifications........................................................................................... 1-2 Table 1-3 Performance Specifications................................................................................... 1-3 Table 1-4 Power Requirements............ ...

190-01277-00 Page 3-2 Rev. A NOTE Non-Garmin part numbers shown are not maintained by Garmin and consequently are subject to change without notice. 3.3 Backshell Assembly The GRA 5500 connector kit includes a circular strain relief assembly. The circular strain relief gives the installer the ability to quickly and easily terminate shields. In non-Garmin Integrated Flight Deck (retrofit) installations, the Garmin circular configuration module may also be attached to the strain relief (see Figure B-2). Refer to the document Circular Connector (and Configuration Mo ...