Garmin FR60 - Women's Lilac Fitness Watch Owner's Manual

Settings Press MODE > SETTINGS > SPORT to access setup menus for the following: RUN GENERAL BIKE Run Settings Press MODE > SETTINGS > SPORT > RUN. AUTO LAP®—turn Auto Lap on or off. When Auto Lap is on, laps are triggered by distance; you can use the lap button to manually mark laps. The auto lap counter resets when a manual lap is set. Select SET to enter the distance. AUTO PAUSE®—turn Auto Pause on or off. When Auto Pause is on, the timer automatically pauses when the your pace falls below a preset pace. Select SET to enter the pace. • • • AUTO SCROLL—u ...

23 Uploading Data Uploading Data Your FR60 stores up to 100 laps and up to 20 hours of exercise files. Periodically upload data to your computer using the ANT+ wireless technology. Requirements 1. Turn on the computer. (An Internet connection is required for software download and Garmin Connect.) 2. Download software (see page 6) so that the necessary USB drivers are installed before connecting the USB ANT Stick to your computer. 3. Connect the USB ANT Stick to an available USB port on your computer. 4. Bring the FR60 within range (5 m) of your computer. 5. Verify th ...

23 Uploading Data Uploading Data Your FR60 stores up to 100 laps and up to 20 hours of exercise files. Periodically upload data to your computer using the ANT+ wireless technology. Requirements 1. Turn on the computer. (An Internet connection is required for software download and Garmin Connect.) 2. Download software (see page 6) so that the necessary USB drivers are installed before connecting the USB ANT Stick to your computer. 3. Connect the USB ANT Stick to an available USB port on your computer. 4. Bring the FR60 within range (5 m) of your computer. 5. Verify th ...

27 Settings PACE-SPEED—select SPEED or PACE. Note: Use UP and DOWN to toggle or change numeric settings. Press MODE at any time to return to the previous page or menu. RACE MODE—will not default back to time mode. Race mode must be turned on and off. Biking Settings Press MODE > SETTINGS > SPORT > BIKE. AUTO LAP®—turn Auto Lap on or off. When Auto Lap is on, laps are triggered by distance; you can use the lap button to manually mark laps. The auto lap counter resets when a manual lap is set. Select SET to enter the distance. AUTO PAUSE®—turn Auto Pause on or o ...

Getting Started icons are not displayed before resuming your activity, you must reestablish the connection with the FR60. To reestablish the connection Make sure accessory is active. Stop and restart the training session OR Press MODE and cycle out of training mode and then back into training mode. For instructions on using the heart rate monitor, see page 7. For instructions on using the foot pod, see page 8. For information about purchasing additional accessories, go to http://buy.garmin.com. Going for a Run 1. Press MODE to view the training page. 2. Press START to ...

23 Uploading Data Uploading Data Your FR60 stores up to 100 laps and up to 20 hours of exercise files. Periodically upload data to your computer using the ANT+ wireless technology. Requirements 1. Turn on the computer. (An Internet connection is required for software download and Garmin Connect.) 2. Download software (see page 6) so that the necessary USB drivers are installed before connecting the USB ANT Stick to your computer. 3. Connect the USB ANT Stick to an available USB port on your computer. 4. Bring the FR60 within range (5 m) of your computer. 5. Verify th ...