Embedded Artists LPC3250 Preliminary Manual

Södra Promenaden 51 SE-211 38 Malmö Sweden Phone/Fax: +46 (0)40-611 00 93 E-mail: [email protected] http://www.embeddedartists.com © Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are trademarks of their respective holders and should be treated as such. Privacy policy: http://www.embeddedartists.com/privacy.php Legal: http://www.embeddedartists.com/legal.php Embedded Artists’ LPC3250 OEM Board v1.5 DS The Art of Embedded Systems Development – made Easy™ Document status: Preliminary LPC3250 OEM Board Feature Highlights The LPC3250 OEM Board provides a quick and easy solution for implementing a high-performance ARM ARM926EJ-S based design around the LPC3250 from NXP.  Build around NXP's ARM926EJ-S LPC3250 microcontroller with 256Kbyte internal SRAM  64MByte external DDR SDRAM, via 16-bit databus  128 Mbyte NAND FLASH  4 MByte SPI-NOR FLASH  100/10Mbps Ethernet interface based on DP83848 ETH-PHY  On-board ISP1301 USB OTG transceiver  13.000 MHz and 32.768 kHz crystals for LPC3250  32Kbyte I2C E2PROM for storing non-volatile parameters  Buffered 16-bit data bus with voltage translation to external bus (VCCEXT can be 1.4-3.6V)  +3.3V powering  200 pos expansion connector (as defined in popular SO-DIMM industry standard), 0.6mm pitch  Compact design with dimensions: 68 x 50 mm Support Highlights  Access to Embedded Artists support page containing o Schematics o User’s Manual o Sample software applications o OEM Board Integration Guide  Supported by Developer’s Kit, see picture to right  Volume discount available  Customization service available for optimized high-volume design Block Diagram of LPC3250 OEM Board NXP Partner Embedded Artists is a partner of NXP. Together we give engineers an excellent base to work from when creating advanced embedded systems. We have a close co-operation and know everything there is to know about the NXP processors. Take advantage of our unique knowledge! For further information, please contact: [email protected] ETH, USB, I2C, GPIO, Buffered memory bus, power, etc. LPC3250 Parallel NAND (3.3V) Buffers 1.8V-to-VCCEXT 16-bit DDR SDRAM (1.8V) SPI- FLASH Ethernet- PHY I2C-E2PROM 13MHz 32.768kHz crystals USB OTG transceiver Adj VCORE (LTC3447)

Södra Promenaden 51 SE-211 38 Malmö Sweden Phone/Fax: +46 (0)40-611 00 93 E-mail: [email protected] http://www.embeddedartists.com © Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are trademarks of their respective holders and should be treated as such. Privacy policy: http://www.embeddedartists.com/privacy.php Legal: http://www.embeddedartists.com/legal.php Embedded Artists’ LPC3250 OEM Board v1.5 DS The Art of Embedded Systems Development – made Easy™ Document status: Preliminary Absolute Maximum Ratings Stress above these limits may cause permanent damage to the board. Technical Data [1] Extended temperature range can be supplied on request. Subject to minimum order volume. [2] Requires VDDcore to be 1.35V. [3] Temperature range planned to be extended after passing Embedded Artists internal qualification process. Mechanical Dimensions Board width according to SO-DIMM standard: 67.6 mm. Board height (top and bottom) according to picture below: ESD CAUTION ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features ESD protection damages may occur on devices subjected to high energy ESD. Therefore, proper ESD precaution should be taken to avoid performance degradation or loss of functionality. Parameter Rating VDD to GND (Supply voltage) -0.2V to +4V Digital/Analog Input/Output Voltage -0.2V to VDD+0.2V Storage temperature -40°C to 100°C Parameter Min Typical Max VCC Supply voltage Ripple with frequency contents < 100kHz Ripple with frequency contents ≥ 100kHz 3.10V 3.30V 3.50V 50mV 10mV VCCEXT Supply voltage 1.40V 3.60V Supply current - idle, 32kHz RTC active - low-power mode (13 MHz) - executing from internal SRAM (266 MHz) - executing from external SDRAM (266MHz) - Ethernet+usb active TBD TBD TBD TBD TBD Max observed VBAT current TBD Operating temperature[1] - 208 MHz core frequency - 266 MHz core frequency[2] 0°C 5°C[3] 60°C 40°C[3] Relative Humidity (RH) 0°C < TA ≤ 50°C, non-condensing 50°C < TA ≤ 60°C, non-condensing 60°C < TA ≤ 70°C, non-condensing 5% 5% 5% 80% 50% 35% Top side components Bottom side components 50.0 mm 4.8 mm 1.2 mm 2.6 mm

Södra Promenaden 51 SE-211 38 Malmö Sweden Phone/Fax: +46 (0)40-611 00 93 E-mail: [email protected] http://www.embeddedartists.com © Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are trademarks of their respective holders and should be treated as such. Privacy policy: http://www.embeddedartists.com/privacy.php Legal: http://www.embeddedartists.com/legal.php Embedded Artists’ LPC3250 OEM Board v1.5 DS The Art of Embedded Systems Development – made Easy™ Document status: Preliminary Pin Information Note that each LPC3250 pin can have more functions than indicated in table below. See datasheet for details. SO- DIMM pins I/O, Application Details Connected to SO- DIMM pins I/O, Application Details Connected to 1 A, Ethernet TXP Ethernet-PHY 101 P, GND 2 A, Ethernet RXP Ethernet-PHY 102 P, GND 3 A, Ethernet TXN Ethernet-PHY 103 B LPC3250, I2S1TX_CLK 4 A, Ethernet RXN Ethernet-PHY 104 B LPC3250, I2S1TX_SDA 5 P, VDD3_3A 105 B LPC3250, I2S1TX_WS 6 P, GND 106 B, GPIO LPC3250, P0.0 7 OD, ETH-LED1 Ethernet-PHY 107 B, GPIO LPC3250, P0.1 8 OD, ETH-LED2 Ethernet-PHY 108 I, GPI LPC3250, GPI_00 9 10 P, VBAT-IN LPC3250, RTC powering 109 B, I2C-SDA LPC3250, I2C2_SDA 10 O, ONSW LPC3250,ONSW 110 O, I2C-SCL LPC3250,I2C2_SCL 11 I, RESET-IN LPC3250, RESET via buffer 111 I, GPI LPC3250, GPI_04 12 O, RESET-OUT LPC3250, RESOUT 112 I, GPI LPC3250, GPI_06 13 I, ETH-PHY-PD Ethernet-PHY, power down 113 A ISP1301, USB_ID 14 I, DBGEN LPC3250, dbgen SPIFI CS control 114 I LPC3250, POWER_ON Vcore 15 I, TCK LPC3250, jtag-tck 115 O LPC3250, TST_CLK2 16 O, RTCK LPC3250, jtag-rtck 116 B, GPIO LPC3250, P2.7 17 I, TRST LPC3250, jtag-trst 117 B, GPIO LPC3250, GPIO_00 18 I, TMS LPC3250, jtag-tms 118 B, GPIO LPC3250, GPIO_01 19 I, TDI LPC3250, jtag-tdi 119 I, GPI LPC3250, GPI_07 20 O, TDO LPC3250, jtag-tdo 120 B, GPIO LPC3250, P2.0 21 P, V3A LPC3250, vdda 121 B, GPIO LPC3250, P2.1 22 NC 122 B, GPIO LPC3250, P2,2 23 P, VSSA LPC3250, vssa 123 B, GPIO LPC3250, P2.3 24 P, GND 124 B, GPIO LPC3250, P2.4 25 O, GPO LPC3250, GPO_10 125 B, GPIO LPC3250, P2.5 26 O, GPO LPC3250, GPO_12 126 B, GPIO LPC3250, P2.6 27 O, GPO LPC3250, GPO_13 127 O, GPO LPC3250,GPO_07 28 O, GPO LPC3250, GPO_15 128 O, GPO LPC3250,GPO_21 29 O, GPO LPC3250, GPO_16 129 P, GND 30 O, GPO LPC3250, GPO_18 130 P, GND 31 B, GPIO LPC3250, P0.2 131 O, Buffered Address bus 15 LPC3250, A15 via buffer 32 B, GPIO LPC3250, P0.3 132 O, Buffered CS3 LPC3250, CS3 via buffer 33 B, GPIO LPC3250, P0.4 133 O, Buffered Address bus 14 LPC3250, A14 via buffer 34 B, GPIO LPC3250, P0.5 134 O, Buffered CS2 LPC3250, CS2 via buffer 35 I, GPI LPC3250, GPI_01 135 O, Buffered Address bus 13 LPC3250, A13 via buffer 36 I, GPI LPC3250, U7_HCTS 136 O, Buffered CS1 LPC3250, CS1 via buffer 37 P, VCC 137 O, Buffered Address bus 12 LPC3250, A12 via buffer 38 P, GND 138 O, Buffered CS0 LPC3250, CS0 via buffer 39 P, VCC 139 O, Buffered Address bus 11 LPC3250, A11 via buffer 40 P, GND 140 O, Buffered BLS1 LPC3250, BLS1 via buffer 41 NC 141 O, Buffered Address bus 10 LPC3250, A10 via buffer 42 A, USB2-DP LPC3250, USB-D+ 142 O, Buffered BLS0 LPC3250, BLS0 via buffer 43 NC 143 O, Buffered Address bus 9 LPC3250, A9 via buffer 44 A, USB2-DM LPC3250, USB-D- 144 O, Buffered WE LPC3250, WE via buffer 45 O LPC3250, GPO_06 145 O, Buffered Address bus 8 LPC3250, A8 via buffer 46 O LPC3250, PWMOUT2 146 O, Buffered OE LPC3250, OE via buffer 47 O LPC3250, U6_IRTX 147 O, Buffer Address bus 7 LPC3250, A7 via buffer 48 I, GPI LPC3250, U6_IRRX 148 O, Buffer Address bus 23 LPC3250, A23 via buffer 49 O LPC3250, U5_TX 149 O, Buffer Address bus 6 LPC3250, A6 via buffer 50 I, GPI LPC3250, U5_RX 150 O, Buffer Address bus 22 LPC3250, A22 via buffer 51 O, GPO LPC3250, GPO_02 151 O, Buffer Address bus 5 LPC3250, A5 via buffer

Södra Promenaden 51 SE-211 38 Malmö Sweden Phone/Fax: +46 (0)40-611 00 93 E-mail: [email protected] http://www.embeddedartists.com © Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are trademarks of their respective holders and should be treated as such. Privacy policy: http://www.embeddedartists.com/privacy.php Legal: http://www.embeddedartists.com/legal.php Embedded Artists’ LPC3250 OEM Board v1.5 DS The Art of Embedded Systems Development – made Easy™ Document status: Preliminary 52 O, GPO LPC3250, GPO_03 152 O, Buffer Address bus 21 LPC3250, A21 via buffer 53 O, GPO LPC3250, GPO_08 153 O, Buffer Address bus 4 LPC3250, A4 via buffer 54 O, GPO LPC3250, GPO_09 154 O, Buffer Address bus 20 LPC3250, A20 via buffer 55 O LPC3250, PWMOUT1 155 O, Buffer Address bus 3 LPC3250, A3 via buffer 56 O LPC3250, HICORE 156 O, Buffer Address bus 19 LPC3250, A19 via buffer 57 O LPC3250, U1_TX 157 O, Buffer Address bus 2 LPC3250, A2 via buffer 58 I, GPI LPC3250, U1_RX 158 O, Buffer Address bus 18 LPC3250, A18 via buffer 59 I ISP1301, USB_VBUS_CTRL 159 O, Buffer Address bus 1 LPC3250, A1 via buffer 60 O, GPO LPC3250, GPO_17 160 O, Buffer Address bus 17 LPC3250, A17 via buffer 61 O, GPO LPC3250, GPO_20 161 O, Buffer Address bus 0 LPC3250, A0 via buffer 62 O LPC3250, SPI1_CLK 162 O, Buffer Address bus 16 LPC3250, A16 via buffer 63 O, GPO LPC3250, GPO_04 163 NC 64 B LPC3250, SPI1_DATIN 164 I, ABUF_EN Connected to GND on board 65 B LPC3250, SPI1_DATIO 165 P, Buffer-VCC 66 O, GPO LPC3250, GPO_05 166 P, GND 67 O, GPO LPC3250, GPO_11 167 B, Buffer Data bus 15 LPC3250, D15 via buffer 68 A LPC3250, TS_XP 168 I, GPI LPC3250, GPI_08 69 A LPC3250, TS_YP 169 B, Buffer Data bus 14 LPC3250, D14 via buffer 70 A LPC3250, AIN1 170 O, GPO LPC3250, GPO_23 71 A LPC3250, AIN2 171 B, Buffer Data bus 13 LPC3250, D13 via buffer 72 A LPC3250, AIN3 172 I, GPI LPC3250, GPI_09 73 O, GPO LPC3250, GPO_00 173 B, Buffer Data bus 12 LPC3250, D12 via buffer 74 B, I2C-SDA LPC3250, I2C1_SDA 174 I, GPI LPC3250, GPI_19 75 B, I2C-SCL LPC3250, I2C1_SCL 175 B, Buffer Data bus 11 LPC3250, D11 via buffer 76 P, GND 176 B, GPIO LPC3250, P2.8 77 P, GND 177 B, Buffer Data bus 10 LPC3250, D10 via buffer 78 B LPC3250, MCICLK 178 B, GPIO LPC3250, P2.9 79 B LPC3250, MCICMD 179 B, Buffer Data bus 9 LPC3250, D9 via buffer 80 O, GPO LPC3250, GPO_01 180 B, GPIO LPC3250, P2.10 81 B LPC3250, MCIDAT0 181 B, Buffer Data bus 8 LPC3250, D8 via buffer 82 B LPC3250, MCIDAT1 182 B, GPIO LPC3250, P2.11 83 B LPC3250, MCIDAT2 183 B, Buffer Data bus 7 LPC3250, D7 via buffer 84 B LPC3250, MCIDAT3 184 B, GPIO LPC3250, P2.12 85 B, GPIO LPC3250, GPIO_05 185 B, Buffer Data bus 6 LPC3250, D6 via buffer 86 O, GPO LPC3250, GPO_14 186 I, GPI LPC3250, GPI_28 87 I, GPI LPC3250, GPI_03 187 B, Buffer Data bus 5 LPC3250, D5 via buffer 88 B, GPI LPC3250, U7_RX 188 O LPC3250, U2_TX 89 O LPC3250, U7_TX 189 B, Buffer Data bus 4 LPC3250, D4 via buffer 90 B, GPIO LPC3250, P0.6 190 I, GPI LPC3250, GPI_17 91 B, GPIO LPC3250, P0.7 191 B, Buffer Data bus 3 LPC3250, D3 via buffer 92 O, GPO LPC3250, GPO_22 192 I, GPI LPC3250, GPI_05 93 B LPC3250, SYSCLKEN 193 B, Buffer Data bus 2 LPC3250, D2 via buffer 94 B LPC3250, SPI2_DATIO 194 I, GPI LPC3250, GPI_16 95 B, GPI LPC3250, SPI2_DATIN 195 B, Buffer Data bus 1 LPC3250, D1 via buffer 96 B, GPIO LPC3250, GPIO_04 196 I, GPI LPC3250, GPI_18 97 B LPC3250, SPI2_CLK 197 B, Buffer Data bus 0 LPC3250, D0 via buffer 98 A ISP1301, USB_VBUS 198 O LPC3250, U3_TX 99 I, GPI LPC3250, GPI_02 199 P, Buffer-VCC 100 O, GPO LPC3250, GPO_19 connected to NAND flash WP 200 P, GND I/O legend O: output I: input B: Bidirectional P: Power A: Analog OD: Open-drain output GPIO: General purpose I/O GPI: General purpose input GPO: General purpose output

Södra Promenaden 51 SE-211 38 Malmö Sweden Phone/Fax: +46 (0)40-611 00 93 E-mail: [email protected] http://www.embeddedartists.com © Copyright 2010 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are trademarks of their respective holders and should be treated as such. Privacy policy: http://www.embeddedartists.com/privacy.php Legal: http://www.embeddedartists.com/legal.php Embedded Artists’ LPC3250 OEM Board v1.5 DS The Art of Embedded Systems Development – made Easy™ Document status: Preliminary Disclaimers Embedded Artists reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Customer is responsible for the design and operation of their applications and products using Embedded Artists’ products, and Embedded Artists accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Embedded Artists’ product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Embedded Artists does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Embedded Artists’ products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Embedded Artists does not accept any liability in this respect. Embedded Artists does not accept any liability for erratas on individual components. All Embedded Artists’ products are sold pursuant to Embedded Artists’ terms and conditions of sale: http://www.embeddedartists.com/sites/default/files/docs/General_Terms_and_Conditions.pdf No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by Embedded Artists for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN EMBEDDED ARTISTS’ TERMS AND CONDITIONS OF SALE EMBEDDED ARTISTS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF EMBEDDED ARTISTS PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY THE CEO OF EMBEDDED ARTISTS, PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, NUCLEAR, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of Embedded Artists’ products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by Embedded Artists for the Embedded Artists’ product or service described herein and shall not create or extend in any manner whatsoever, any liability of Embedded Artists. This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Definition of Document Status Preliminary – The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Embedded Artists does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. The document is in this state until the product has passed Embedded Artists product qualification tests. Approved – The information and data provided define the specification of the product as agreed between Embedded Artists and its customer, unless Embedded Artists and customer have explicitly agreed otherwise in writing.