caddytrek R2 S-Series Operation & User’s Manual

CaddyTrek is designed for use in wide open spaces only. Do not operate CaddyTrek in enclosed or confined areas. Abnormal or erratic behavior can be caused by radio frequency signals interference Wi-Fi or similar electronic signals. The CaddyTrek uses RF and Ultrasound signals to communicate back and forth from the CaddyTrek to the remote handset. On occasion the user may experience interference with the communication of the unit. When encountering interference, use Push mode. Signal Interference Be aware of the following:  Overhead power lines  Radio a ...

unit in ideal operating condition. Though the frequency to perform maintenance tasks are recommended, it may be necessary to perform certain procedures more or less frequently depending on use. Owners must use their best judgement in maintaining their CaddyTrek. Tools and Materials  3 mm wrench and needle nose pliers  4, 5 and 6 mm hex wrench  Phillips and flathead screwdriver  Cleaning solution or water  Bearing lubricant  Brush and Rags Caster Wheel Assembly Maintenance The ...

Who can I contact about any issues concerning my cart? For technical problems with your cart, contact customer service at 702- 982-6598 x2 or x4. You can also email us at [email protected]. How often should I charge my cart? Charge after a full round or when indicator lights are flashing with two green lights. When not using, store battery at a 75% charge level. Both my unit and handset are powered up, but I can’t engage any of the modes, what do I do? You need to re-synch the handset to the unit. Power off the unit and the handset. Remove the battery fr ...

If for any reason customer wishes to return their item, the item must be returned within 30 days after receipt, unused and in its original packaging, for a complete refund. Returns will not be accepted after 30 days. The 30 day return allotment begins on the delivery date of the item. All returns to FTR Systems must be authorized prior to shipment. A Return Merchandise Authorization (RMA) number is provided solely by FTR Systems to authorize the return. Returns must be shipped in accordance with the following guidelines:  Product must be unused.  Retur ...

prevent it from seizing. It is recommended to remove the caster wheel to apply the lubricant, so do this while you are cleaning the wheel. Just be sure to wipe the bearing clean before applying lubricant. 3. Tension Adjust the caster wheel’s tension with the 6 mm hex wrench. We recommend you adjust the caster wheel tension so that it will spin a total of five revolutions per spin. Do not over tighten the caster wheel as this may cause damage and misalign the bearing. A caster wheel that i ...

unit in ideal operating condition. Though the frequency to perform maintenance tasks are recommended, it may be necessary to perform certain procedures more or less frequently depending on use. Owners must use their best judgement in maintaining their CaddyTrek. Tools and Materials  3 mm wrench and needle nose pliers  4, 5 and 6 mm hex wrench  Phillips and flathead screwdriver  Cleaning solution or water  Bearing lubricant  Brush and Rags Caster Wheel Assembly Maintenance The ...