C3 Custom Coolers ROVER Quick Start Manuals
Text of the manual
See Owner’s Manual and assembly videos on
www.c3customcoolers.com/p/ownersmanual
2.
• Install batteries in remote
• Switch cooler power to OFF position
• Hold down Pairing Button until LEDs fl icker, continue holding
• Turn cooler ON (the motor will buzz when paired)
• Release Pairing Button
3.
1.
2.
3.
Before first use, you MUST
If you expe
Tools required: Phillips head screwdriver, wrench or needle nose pliers
Assembly time: 10 minutes
Assembly
Step 7
Line up notches on hubcaps with
notches on wheels.
Gently press hubcaps to snap
into place.
Step 5
Place cooler body upside down
on a non-abrasive, clean surface.
Remove rubber band from
rear gear box assembly.
place, slide rear
