ASCOM TACTICAL OPENACCESS NODE T Product Sheet

Base Product Software BPS 2.3 Platform: Ascom openAccess® Segment: Defense Division: Security Communication Ascom openAccess Nodes are integrated voice and data switches that provide the essential foundation for today’s mission critical communications infrastructures. They are used by national and international military forces, peace keeping troops and crisis management teams. Ascom openAccess Nodes’ connectivity and operational features provide secure and scale- able functionality for voice, data and imagery applications demanded in the combat arena and homeland security relations. Built on proven hardware and software technology, Ascom compact network nodes are compliant with global industry and governmental standards for vehicle and military grade electronics. In alignment with NATO TACOMS Post 2000 architecture, Ascom Tactical openAccess Node T (TAN T) provides interoperable access functionality towards mobile headquarter communication infrastructures. In mission critical operations this critical communication link assures information flow at all levels from command headquarters to the troops. Ascom Tactical openAccess Node T connects local area subsystems with headquarter offices, other detached command and control facilities and isolated mobile area sub-systems. By creating an extended single all-IP network, fixed line communication equipment and field radio devices are able to exchange information enhancing situational awareness. Ascom Tactical openAccess Node T is a rugged high-performance military-grade communication network access node with integrated routing functionality. With low power consumption it is mechanically designed for a large variety of permanent and ad-hoc deployments, principally in extreme field conditions. The watertight ultra rugged enclosure is hermetically sealed to withstand severe humidity and dust exposure as well as extreme temperatures. It is corrosion resistant and shock/vibration protected. Ascom Tactical openAccess Node T can be used to create virtual LANs even over various transmission technologies, including Ethernet, ISDN, SHDSL, LOS (Line-of-sight) and satellite infrastructure. QoS routing priorities can be defined as well as security levels set for secure and efficient traffic management. ASCOM TACTICAL openACCESS NODE T MOBILE VOICE AND DATA SWITCH FOR TACTICAL COMMUNICATION SYSTEMS

Ascom Tactical openAccess Node T is a ruggedized interoperable voice and data network access element for tactical communication systems. It provides efficient connectivity between permanent and detached ad-hoc command and control facilities and mobile area sub-systems while allowing essential links to external public, strategic and legacy networks. Wide Area Subsystem Local Area Subsystem Mobile Subsystems (VHF/HF) Inter-Operable Gateway The Tactical openAccess Node T is typically used as: WAS LAS MS Edge Node Access Node Access Node IOG MS LAS WAS VoIP ETH ETH ISDN E1 WAS LAS MS IOG 2   product sheet: ASCOM TACTICAL openACCESS® NODE T and BPS 2.3

networks, wired and wireless, IP and non-IP, into one unified All-IP communication domain. This enables a transparent and robust IP network for tactical environments, where users can communicate end-to-end without technology boundaries. Multi-Protocol Routing TAN T supports multiple IP routing protocols, and can intelligently arbitrate between them. Heterogeneous Networking Multiple tactical network types like Ethernet, E1, SHDSL, Eurocom, CNR, or WLAN can be connected to TAN T. Mesh Topology TAN T can be used as autonomous mesh network node. High-Performance Ethernet Switching TAN T includes non-blocking, full gbit/s line rate Ethernet switch (optical and copper). Site-to-Site VPN Standards compliant IPSec VPN tunnels for LAN Ethernet ports supporting multiple authentica- tion and encryption schemes can be established between TAN T nodes. Available Q2/2011 Multi-Protocol Voice Switch (PBX) Multiple VoIP and circuit switched voice technologies (SIP, IAX, ISDN, Eurocom, Analog) are supported by the built-in PBX. VoIP Gateway The TAN T PBX can convert between all supported voice technologies, allowing it to be used as VoIP gateway, e.g. ISDN-to-SIP, or Analog-to-SIP. Voice Trunking Multiple TAN T nodes can build a fully inter- connected voice network. Flexible number translation per voice trunk allows for integration into different numbering domains. Integration of HF/ VHF/LOS Radios Routing algorithms optimized for low bandwidth, high latency radio networks are available and allow to route traffic over wireless radio networks. Network Services TAN T provides network services to locally attached LANs, as DHCP, DNS, and NTP services. DiffServ Traffic Shaping The built-in QoS engine allows for shaping traffic with prioritization based on DiffServ or 802.1D classification. Data features Switching / VLAN TAN T provides non-blocking, line rate switching for all LAN Ethernet ports (copper and optical) including support for 802.1Q VLAN. IP Routing TAN T routing engine supports static, OSPF, BGP, PIM-SM, and IGMP routing protocols. Specialized routing algorithms are available for mesh networking and integration of radio networks. Filtering and redistribution of routes is supported. WLAN Access Point TAN T includes 802.11 a/b/g compliant wirelss LAN access point. Available Q2/2011. QoS DiffServ standards compliant IP/Ethernet traffic conditioning, based on IP DSCP or Ethernet 802.1p fields. Hardware traffic shaper works at gbit/s line rate. DNS RFC compliant DNS server supporting dynamic DNS in combination with included DHCP server. Upstream DNS server (forwarders) and caching of DNS queries are supported. DHCP Full featured standards compliant DHCP server supporting multiple IP subnets. NTP NTP server and client functionality in order to provide accurate timing information for connected devices. Time sources for NTP server include GPS, remote NTP servers, or local clock. Standards, Protocols IEEE 802.3 Ethernet (Cu/FO), E1/T1 G.703/704, SHDSL, Eurocom Data (Ascom proprietary), 802.11 a/b/g Voice features PBX IP PBX supporting analogue (FXO, FXS, radio), digital (ISDN, Eurocom), and VoIP (SIP, H.323, IAX) interfaces. Technology neutral voice switching core combined with voice application platform for fast development of customer specific voice features. Support for direct inward and outward dial (DID/DOD) with caller-ID. Voice Gateway Full voice gateway functionality including support for DTMF and caller-ID for all available analogue, digital, and VoIP interfaces. Number Translation Number translation (NT) applied on called and calling numbers for incoming and outgoing calls. PBX includes multiple NT hooks in call routing path, as e.g. one NT per voice trunk. TAN T can be easily integrated into existing dialing plans. Voice Trunking IAX trunks allow to setup bandwidth optimized VoIP channel bundles between TAN T nodes. ISDN, Eurocom, SIP, and H.323 trunks are available for connecting TAN T to existing telephony infrastructure, including PSTN. Automatic Number Resolution Number flood searching allows for deploying flat dialplans. Voice Applications Conferencing, hotline, MLPP (available July 2011) alternate routing (available July 2011). Fast development of customer specific applications. Standards, Protocols, Codecs FXS, FXO, ISDN (Euro-ISDN, QSIG), Eurocom (a,b,c,STANAG), SIP, H.323 (available March 2011), IAX, G.711, G.723, GSM Security IPSec VPN Encrypted site-to-site IPSec VPNs supporting multiple authentication methods. Available Q3/2011. Firewall/NAT Firewall supporting filtering rules with access to full IP packet headers. Stateless and stateful filtering. Network address translation (NAT) for private LANs. Available Q3/2011. Key Store Import and management of PKI certificates and CRLs. Available Q3/2011. Emergency Erase All sensitive data in TAN T can be erased within few milliseconds by pressing emergency erase hardware or software key, also when node is switched off. Available Q3/2011.   product sheet: ASCOM TACTICAL openACCESS® NODE T and BPS 2.3

Although the information in this publication is represented in good faith and believed to be correct, Ascom makes no representations or warranties as to the completeness or accuracy of the information. In no event will be Ascom responsible for damages of any nature whatsover resulting from the use of or reliance upon the information contained in this document. Such information is subject to change without notice. Ascom gives no warranty and makes no representation that any of its products contained in this document are designed for any particular use or purpose. The graphics and contents of this document are the copyrighted work of Ascom and contain proprietary trademarks and tradenames of Ascom. Technical Specification System Management Management GUI Web GUI for configuring and monitoring TAN T, remotely through IP network, or locally through laptop/PC connected to service Ethernet port. GUI framework allows for fast development of customer specific GUIs, e.g. mission specific configuration wizards. Management Web Services Interface XML-RPC compliant web services interface for configuring and monitoring TAN T nodes. Use cases include integration of TAN T into existing mission planning tools, or network management solutions. This interface is service-oriented architecture (SOA) compliant. Configuration Profiles System and feature level configuration profiles can be exported, imported, and activated without rebooting TAN T. SNMP SNMP v1, v2c, and v3 compliant agent supports remote monitoring of TAN T. Following MIBs are available: MIB-II (RFC 1213 and successors), Host Resources (RFCs 1514, 2790), SNMPv3 (RFCs 2571-5, 3411-3418). Software Mainte- nance Remote and local software updates are supported. Built-In Self-Testing (BIT) TAN T hardware and software functions are tested on boot and on demand. Test reports allow for quick troubleshooting. Local/Remote Logging Standard UDP based syslog for remote and local logging of system events. Environmental conditions Temperature -40..+55°C operation (with internal heating), -40..+71°C storage MIL-STD-810F, 501.4 proc I and II and 502.4 proc I and II Relative Humidity 95% RH MIL-STD-810F, method 507.4, proc. 507.4-1, 10 cycles @ 60°C Waterproof MIL-STD-810F, method 506.4, proc. I (rain and blowing rain 100mm/h, 40’ per surface) EMC (industrial usage) Emissions MIL-STD-461E Immunity MIL-STD-461E Mechanical Watertight and hermetically sealed housing, carry handles or 19“ mounting adapters, hardened for military use Size (LxHxD)/mm 400x110x265 Weight 10 kg Cooling Cooling functions without air exchange between inside and outside the housing. If required, an internal fan activates the airflow and optimises the cooling. Vibration MIL-STD-810F, method 514.5, cat. 20, ground mobile, proc. I, 1.04g rms, according tab. 514.5C-VII fig. 514.5C-1, 5-500Hz, 40’ per axis Functional shock MIL-STD-810F, method 516.5, proc. I, functional shock/operation, 30g/11 ms Shock, bench handling MIL-STD-810F, method 516.5, proc. VI Available interfaces Main Unit Management Ethernet 1 x 100Base-TX Switched Ethernet 4 x 1000Base-T Optical Ethernet 2 x 1000Base-X, multi mode or single mode fiber modules for 0,5-160 km Relay in 1 x Relay out 1 x Serial port 2 x RS-232 USB 4 x Internal expansion units ET P104 8 x E1 per unit DSL P104 4 x G.SHDSL (2-wire) per unit AtMUX-r 30 x a/b FXS or FXO per unit; configurable in groups of 4; reserves 1xE1 port ECOM P104 EUROCOM EES / D/1: 2xA (10 pin) or 4xB or 4xC Power Input voltage 22-50VDC or 230VAC with external power supply Power consumption Main unit 58W without heating 81W with maximum heating Expansion units ET P104: 3.1W ECOM P104: 4.5W DSL P104: 5.6W AtMUX-r: 25W peak, 10W typical Standard configuration The standard configuration (T111) includes following units and externally available interfaces: 1 x 10/100Base-TX, ƒƒ 2 x 10/100/1000Base-T, ƒƒ 2 x 1000Base-X, single mode ƒƒ Relay with 1 x Relay in and 1 x Relay out (on one connector), ƒƒ 1 x RS-232 ƒƒ 3 x E1 ƒƒ 2 x EUROCOM EES D/1: A (10 pin) or C (on one connector) ƒƒ 2 x G.SHDSL (on one connector) ƒƒ AT with 3 x FXS, 1 x FXO (on one connector) ƒƒ Ascom (Switzerland) Ltd. Belpstrasse 37 CH-3000 Berne 14 T + 41 31 999 13 65 F + 41 31 999 16 82 [email protected] www.ascom.com/defense Ascom (Austria) Ges.m.b.H Lemböckgasse 49 1230 Wien T +43 1 811 77 0 F +43 1 811 77 10 [email protected] www.ascom.at Ascom (Finland) Oy Pakkalankuja 6 FI-01510 Vantaa T + 358 9 825 901 F + 358 9 825 902 79 [email protected] www.ascom.fi Ascom (CZ) s.r.o. Zemské právo 1199/5 CZ-10200 Praha 10 T + 420 267 219 512 F + 420 267 219 511 [email protected] www.ascom.cz   product sheet: ASCOM TACTICAL openACCESS® NODE T and BPS 2.3