Aolin AL-630 Manual 

[ AL-630 ] 2-Way Motorcycle alarm system Arm: Disarm: Locate motor: Remote Start Engine: Function Operation Function Key Locate motor Keyboard lock Disarm Arm Battery Assistant function Remote start/open light Illegally starting alarm Illegally starting alarm Sending signal Shocking alarm Shocking alarm Disarm/Iginition off Arm/Anti-robbery 1. Arm/Mute arm: Press the button once, the siren will beep once , the alarm system is in ARM mode. If move the motorcycle or ignition on, the siren will sound and the direction lights will flash, the engine will be locked at the same time. And the remote controller will beep and show icons in LCD display. Press any button, the icons will be removed. 2. Disarm: Press the button once, the siren will give 2 beeps, the direction lights would flash twice, the motorcycle is in the DISARM status. 3. Locate motor: Press the button once, the direction light will flash 8 times, the siren will beep 8 times, and you can know where your motorcycle is. 4. Remote Start Engine: Press the button twice within 3s to start the engine. Press on the button for 3.5s, turn on the background light. After starting the engine by remote controller, the engine will be on until you stop it by remote controller. You can drive the motorcycle without using the key, so make sure no other people can get access to you motorcycle when using this function. 5. Adjust Sensitivity: Adjust the sensitivity on the mainframe by hand, turn clockwise to increase sensitivity, turn anti-clockwise to decrease sensitivity. The sensitivity has been adjusted well when leaving factory. 6. Remote Cut off Engine: When the engine is running, press the button once to stop the engine. (Please kindly note that remote starting engine is to remote cutting off engine.) 7. Anti-robbery and assistance: When the motorcycle is robbed and driven away, the owner- driver can stop it by pressing the button once, the siren will sound urgently and the direction lights will flash at the same time. 8. Code Learning: In disarm mode, put the motorcycle key in the key lock and turn it from ACC OFF to ACC ON, 3 times in 3s, when the lights flash and the siren beeps once, press any button on the remote controller within 10s, the direction lights will flash once, it means the system learn the Code of the remote controller. The other remote controller can be learnt code in the same way. ( The code has been learnt well before leaving factory, the user need not learn it again if unnecessary.) Remark: one mainframe could learn at most two remote controllers once. 9. Keyboard lock : Press the buttons and at the same time and hold for 3.5 s to lock keyboard ; press these two buttons for 3.5s again to unlock the keyboard.

function contrast form Vehicle Wire Mainframe Wire Color HONDA Wire Color SANYANG Wire Color YAMAHA Wire Color SUZUKI Wire Color 12v(+) 12v(-) Key on+12v Start Wire Ignition off (Up) (Dowm) Direction Light Direction Light Red Black Orange Blue Pink Gray Yellow Yellow Red Black Yellow/Red Black and White(Up) Black and White (Down) Lighte Blue Orange Green Red Black Yellow/Red Black and White(Up) Black and White (Down) Light Blue Orange Green Brown Blue/White Black and White(Up) Black and White (Down) Deep Brown Deep Green Black Red Red Black/White Orange Black/White (Remark1) Black Green Ignition off (Hanging straightly) Turn off wire