AARC Systems AARC-EVAC Installation & Operation Manual

Wireless Linked Message Player & Message Player/Repeater Units Installation & Operation Manual Components Supplied 1 x ARX43E72-FB Message Player Unit with Flashing Beacons OR Message Player/Repeater Unit with Flashing Beacons 2 Speaker 1 x ARX43E40-FB Flashing Beacons No Audio Also available: 3 Speaker 1 x 15 VDC Power Supply 2 x 15 Watt Speakers* 1 x ARX43E72-FB-R 1 x AARC Antenna 1 x ARX43E73-FB Message Player Unit with Flashing Beacons OR Message Player/Repeater Unit with Flashing Beacons 1 x 15 VDC Power Supply 3 x 15 Watt Speakers* 1 x ARX43E73-FB-R 1 x AARC Antenna 1 x ARX43E74-FB Message Player Unit with Flashing Beacons OR Message Player/Repeater Unit with Flashing Beacons 1 x 15 VDC Power Supply 4 x 15 Watt Speakers* 1 x ARX43E74-FB-R 1 x AARC Antenna *A combination of Horn and Box Speakers as required. 4 Speaker

Installation & Operation Manual 2 Plastic Screw Locks Speaker Connection SPK1 Speaker Connection SPK2 Speaker Connection SPK3 Speaker Connection SPK4 Speaker Volume Control SPK1 Speaker Volume Control SPK2 Speaker Volume Control SPK3 Speaker Volume Control SPK4 1 of 4 Wall Mounting holes, these are pre-drilled. Cable gland entry for L/H & R/H Speakers Power Supply input On/Off Switch LED Status Indicator Antenna Connection or pre-installed antenna (‘N’ Type Socket) Alarm Buzzer (sounds if battery requires servicing) AARC-EVAC TXANT443N Antenna

Installation & Operation Manual 3 Installation Instructions 1. Removing Front Cover 2. Fixing to the wall 3. Connecting to Power Supply 4. Alert to Evac Auto-Changeover 5. Attaching the antenna Note: 6. Fitting the external speakers Note: 7. Turning the unit on a) Note: b) c) d) Note: e) f) 8. Replacing the lid Specifications Digital Data Radio Receiver Audio File Format Audio Data Storage Device Audio Output Internal UPS Battery Backup Power Supply Dimensions Antenna

Installation & Operation Manual 4 Maintenance The UPS Battery condition should be checked regularly for correct operation. This can be done by observing the battery condition indicator on the bottom of the unit (see below for details). This procedure should be added to your company or organisation’s maintenance schedule. AC Power & UPS Battery Condition Indicator The LED light in the clear lens at the bottom of the box will indicate the condition of the UPS battery/AC power supply to the unit. Constant Green Battery Voltage good, AC Power Supply connected, system running. Replacement Battery: 7Ah 12V Sealed Lead Acid (SLA) Battery Green Slow Flash Battery Voltage good, AC Power Supply off line system running on UPS. Green Rapid Flash Power supply connected, unit internal power switch ( ) is in the off position (system switched off). Red Constant AC Power connected Battery charging Condition, system off, whilst Battery Low. Red Rapid Flash Battery test failed but battery serviceable, AC Power Supply Red Flash once every 15s, Buzzer sounds every 60s Green Constant with Brief Red Flash and Buzzer every 4s AC Power Supply connected, system running, UPS Battery Voltage Low, not serviceable and battery replacement required. 10