Abus PPDF16000 Manual 

Pair new camera After pressing the button again, a window with a countdown will appear. During the countdown, press the pairing button on the camera for five seconds. If the connection was successful, a new window will appear confirming the process. Once the connection has been made, it will remain unchanged. If you want to change the camera to another channel, you will have to pair it again. Enable/disable camera You can enable or disable the camera here. Camera enabled Camera disabled Please note that disabled c ...

Select the storage medium that you want to format. Format external USB hard drive Format SD card During formatting, all existing data on the storage medium is deleted. Network settings To connect to the internet and access the recorder via the app, connect the recorder to your router using the network cable. Choose between static IP and DHCP. DHCP: With this setting, the DVR automatically receives an IP address from the router. Static IP: Here you can assign a static IP address. The address must match your existing network environment for external access to wor ...

Selection This symbol indicates the camera currently selected. The audio transmission always comes from the selected camera. To start audio transmission from another camera, select the camera by clicking on it. Resolution display Camera is transmitting in 720p resolution (1280 x 720 pixels) Camera is transmitting in 1080p resolution (1920 x 1080 pixels) Channel display Camera channel 1 Camera channel 2 Camera channel 3 Camera channel 4 Network display Network connected, UPnP active on the ro ...

to the settings in the description in point 7. Camera settings  Pair camera  Enable/disable camera  Image resolution  Image quality Recording settings  Schedule  Motion detection sensitivity  Motion screen  Recording duration/alarm settings System settings  Date and time  Screen display  Idle display  Energy saving mode  Push notification The “Push notification” menu is only available in the app. A description can be foun ...

3.1. LED behaviour PPDF16000 – Monitor LED Status Description Power LED Lights up red Monitor connected to power Off Monitor has no power supply Link LED Lights up green Monitor connected to at least one camera Flashes green Monitor in pairing mode Off Monitor not connected to any cameras PPDF18000 – Recorder LED Status Description Power LED Lights blue Recorder connected to power Off Recorder has no power supply PPDF16000 – Camera/PPDF18000 – Camera/PPDF14520/PPDF14520W LED Status Description Power LED Lights up red Camera connected to po ...

2. Description of hardware ................................................................................................................... 5 2.1. PPDF16000 – Monitor ............................................................................................................. 5 2.2. PPDF18000 – Recorder .......................................................................................................... 6 2.3. PPDF1 ...