Karcher puzzi 100 Manual 

www.kaercher.com/register-and-win Puzzi 100 Puzzi 200 59658180 08/13 Deutsch 3 English 10 Français 16 Italiano 23 Nederlands 30 Español 37 Português 44 Dansk 51 Norsk 57 Svenska 63 Suomi 69 Ελληνικά 75 Türkçe 82 Русский 88 Magyar 96 Čeština 103 Slovenščina 109 Polski 116 Româneşte 123 Slovenčina 130 Hrvatski 137 Srpski 144 Български 151 Eesti 158 Latviešu 164 Lietuviškai 171 Українська 177

these original instructions prior to the initial operation of your appliance and store them for later use or subsequent own- ers. – Before initial start-up it is definitely nec- essary to read the safety information no. 5.956-251.0! – The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dan- gers for the operator and other persons. – In case of transport damage inform ven- dor immediately Notes about the ingredients (REACH) You will find current information about the ingredients at: www.kaercher.com/REACH  Danger Immediate danger that can cause severe injury or even death.  Warning Possible hazardous situation that could lead to severe injury or even death. Caution Possible hazardous situation that could lead to mild injury to persons or damage to property. This device is intended for commercial use as a wet cleaning device for carpets as de- picted in these operating instructions as well as in the descriptions and safety notes in the enclosed brochure "Safety indica- tions for brush cleaning devices and spray extraction devices". Contents Environmental protection . . EN . . .1 Symbols in the operating in- structions . . . . . . . . . . . . . . EN . . .1 Proper use . . . . . . . . . . . . . EN . . .1 Device elements. . . . . . . . . EN . . .2 Start up. . . . . . . . . . . . . . . . EN . . .2 Operations . . . . . . . . . . . . . EN . . .2 Cleaning methods . . . . . . . EN . . .3 Shutting down . . . . . . . . . . EN . . .4 Transport . . . . . . . . . . . . . . EN . . .4 Storage. . . . . . . . . . . . . . . . EN . . .4 Maintenance and care . . . . EN . . .4 Troubleshooting . . . . . . . . . EN . . .4 Accessories and Spare Parts EN . . .5 Warranty. . . . . . . . . . . . . . . EN . . .5 EC Declaration of Conformity EN . . .5 Technical specifications . . . EN . . .6 Environmental protection The packaging material can be recycled. Please do not throw the packaging material into household waste; please send it for recycling. Old appliances contain valuable materials that can be recycled; these should be sent for recy- cling. Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances using ap- propriate collection systems. Symbols in the operating instructions Proper use 10 EN

1 Casing 2 Carrying handle 3 Fresh water tank with sieve 4 Dirt water reservoir, removable 5 Cover 6 Switch for spraying 7 Switch for vacuuming 8 Spray/suction hose 9 Power cord 10 Suction pipe 11 Manual nozzle for upholstery cleaning (option) 12 Container for defoamer (Puzzi 200) 13 Storage container for detergent tabs (Puzzi 200) 14 Additional socket for professional PW 10 15 Floor nozzle for carpet cleaning 16 Handle 17 Bender Place suction pipe over floor nozzle and tighten union joint on the floor nozzle fingertight (left thread). Caution While connecting make sure that the spray tubes meet in the suction pipe and the floor nozzle. If needed, slide handle onto suction pipe and attach in the desired position using the enclosed hexagon socket wrench. Place the elbow over the suction pipe and tighten the union joint on the elbow fingertight. Caution While connecting make sure that the spray tubes meet in the suction pipe and the el- bow. Illustrations on Page 2 Insert the suction hose into the suction hose connection on the appliance. Insert the coupling of the fresh water hose into the fresh water connection of the appliance and lock into place. see Figure 1 Connect the suction hose to bender of the manual nozzle. Connect the coupling of the fresh water hose to the bender and lock into place. see Figure 2 The manual nozzle for upholstery cleaning (not included) is attached directly to the suction hose without the use of an elbow. * not included in the delivery Illustrations on Page 2 Mix fresh water and detergent in a clean container (use the concentration rec- ommended for the detergent). see Figure 3  Warning Health risk, risk of damage. Observe all in- dications on the detergent used. Note: Warm water (max. 50°C) will in- crease the cleaning effect. Note: For considerate treatment of the en- vironment use detergent economically. Fill detergent solution into the fresh wa- ter reservoir. The fill level must not ex- ceed the "MAX" mark. see Figure 4 Insert dirt water reservoir into the appli- ance and attach lid. Plug in the main plug. Device elements Start up Selecting the nozzle Carpeting Floor nozzle (230 mm) Upholstery, wall rugs, automobile interior cleaning Manual nozzle (110 mm) * Stairs Carpet nozzle * Operations 11 EN

suction turbine. Press the spray switch to turn on the de- tergent pump. see Figure 5  Warning Risk of damage. Check the object to be cleaned prior to using the appliance in an inconspicuous place for colour fastness and water resistance. Use the lever on the bender to spray on detergent solution. Run across the surface to be cleaned in overlapping paths. Pull the nozzle back- wards (do not push). see Figure 6 In case of work interruptions, the floor nozzle can be stored in the handle. see Figure 12 If the dirt water reservoir is full, switch off the suction and spray switches. Remove the lid. Remove the dirt water reservoir from the appliance and empty it. see figures 7 and 8 Spray and suction off detergent solution in one work cycle. Note: Repeated suctioning without spray- ing will shorten the drying time. Apply detergent solution with suction turbine turned off and soak for 10 to 15 minutes. Clean the surface just like with normal soiling. In order to further improve the cleaning result, the surface can be recleaned us- ing clear, warm water. – Highly soiled spots should be pre- soaked and the detergent solution should soak 5 to 10 minutes. – Always work from the light to the shade (from the window to the door). – Always work from the cleaned to the un- cleaned surface. – The more sensitive the surface (oriental rugs, berbers, upholstery material) the lower the cleaning solution concentra- tion should be. – Rugs with jute backing can shrink if too much water is used and can bleed col- ours. – Brush high-fiber rugs in the direction of the weave after cleaning (using a fiber brush or a scrubber). – Water-proofing the fabric using Care Tex RM 762 after the wet cleaning pre- vents a quick resoiling of the textile sur- face. – Do not step on cleaned surfaces until they have dried and do not place furni- ture on them to avoid pressure spots or rust stains. – When cleaning previously shampooed carpets, foam will be generated in the dirt water reservoir. In such a case add Foam ex RM 761 to the dirt water reser- voir. If you require further information please re- quest the product information sheet and the DIN safety data sheet for the respective cleaning agent. Empty the dirt water reservoir. Cleaning methods Normal soiling Strong soiling or stains Cleaning tips Detergent Carpet and upholstery cleaning RM 760 powder RM 760 tabs RM 764 liquid Defoaming RM 760 Waterproofing carpets RM 762 Mite removal RM 765 Mitex 12 EN

Shortly activate the lever on bender to decrease the pressure. Separate bender from the spray/suction hose. Remove the lid. Insert the suction hose into the fresh water reservoir. see Figure 9 Press the suction switch to turn on the suction turbine. Empty the fresh water reservoir and switch the appliance off. Remove the dirt water reservoir from the appliance and empty it. Connect the bender (with suction pipe and nozzle) to the suction hose. Connect the coupling of the fresh water hose to the bender and lock into place. Fill approx. 2 litres of fresh water into the fresh water reservoir. Do not add any detergents. Place nozzle into the dirt water reservoir. Press the spray switch to turn on the de- tergent pump. see Figure 10 Activate lever on bender and flush the appliance for appr. 1 to 2 minutes. Turn off the appliance. Disconnect the mains plug from the socket. Remove the dirt water reservoir from the appliance and empty it. Clean the external surfaces of the appli- ance. Caution Risk of injury and damage! Observe the weight of the appliance when you transport it. For transport, place suction pipe on the carrying handle and attach spray/suc- tion hose to hook. When transporting in vehicles, secure the appliance according to the guide- lines from slipping and tipping over. Caution Risk of injury and damage! Note the weight of the appliance in case of storage. This appliance must only be stored in inte- rior rooms.  Danger Danger of injury by electric shock. First pull out the plug from the mains before carrying out any tasks on the machine. Check high power cable, extension ca- bles and hoses for damage every time before use. Remove all water from the appliance prior to longer periods of non-use to avoid offensive odours. Clean the sieve in the fresh water reser- voir and the lint trap next to the dirt wa- ter reservoir regularly. see Figure 11  Danger – Danger of injury by electric shock. First pull out the plug from the mains be- fore carrying out any tasks on the ma- chine. – Get the electrical components checked and repaired only by authorised cus- tomer service persons. – Contact an authorised customer service person in case of problems not men- tioned in this chapter or if you are in doubt or when you have been explicitly asked to do so. Shutting down Empty the fresh water reservoir Cleaning the device Transport Storage Maintenance and care Troubleshooting 13 EN

Check couplings on the fresh water hose for proper connection. Detach nozzle attachment and remove, clean or replace nozzle. Clean the sieve in the fresh water reser- voir. Detergent pump defective, contact Cus- tomer Service. Clean nozzle mouthpiece. Check the correct positioning of the lid. Clean seal on lid and surface on the ap- pliance. Clean the fluff filter. Check suction hose for blockages; clean if required. Fill up fresh water reservoir. – Only use accessories and spare parts which have been approved by the man- ufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be oper- ated safely and trouble free. – At the end of the operating instructions you will find a selected list of spare parts that are often required. – For additional information about spare parts, please go to the Service section at www.kaercher.com. The warranty terms published by the rele- vant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in man- ufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. Please submit the proof of purchase. We hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. The undersigned act on behalf and under the power of attorney of the company man- agement. Authorised Documentation Representative S. Reiser Alfred Kärcher GmbH Co. KG Alfred-Kärcher-Str. 28 - 40 71364 Winnenden (Germany) Phone: +49 7195 14-0 Fax: +49 7195 14-2212 Winnenden, 2012/12/01 No water exiting from nozzle Spray stream one-sided Insufficient vacuum performance Detergent pump noisy Accessories and Spare Parts Warranty EC Declaration of Conformity Product: Spray extraction device Type: 1.100-xxx Type: 1.193-xxx Relevant EU Directives 2006/42/EC (+2009/127/EC) 2004/108/EC Applied harmonized standards EN 55014–1: 2006+A1: 2009+A2: 2011 EN 55014–2: 1997+A1: 2001+A2: 2008 EN 60335–1 EN 60335–2–68 EN 61000–3–2: 2006+A1: 2009+A2: 2009 EN 61000–3–3: 2008 EN 62233: 2008 Applied national standards - CEO Head of Approbation 14 EN

-- IPX4 IPX4 Protective class II II Blower motor performance (max) W 1250 1250 Nominal performance of blower motor W 1100 1100 Power (tot.) W -- 1350 Air volume (max.) l/s 54 54 Negative pressure (max.) kPa (mbar) 22 (220) 22 (220) Spray pump performance W 40 80 Spray pressure MPa 0,1 0,2 Spray pressure (max.) MPa 0,3 0,3 Spray volume l/min 1 2 Temperature of the cleaning solution (max.) °C 50 50 Container capacity l 14 14 Filling quantity of fresh water l 10 10 Fill volume wastewater l 9 9 Appliance socket performance (max) W 250 250 Length x width x height mm 665 x 320 x 435 665 x 320 x 435 Typical operating weight kg 10,2 12,0 Max. ambient temperature °C +40 +40 Values determined to EN 60335-2-68 Sound pressure level LpA dB(A) 68 68 Uncertainty KpA dB(A) 1 1 Hand-arm vibration value m/s2 <2,5 <2,5 Uncertainty K m/s2 0,2 0,2 Power cord H05VV-F 2x1,0 mm2 Part no.: Cable length EU 6.647-860.0 7,5 m GB 6.647-993.0 7,5 m CH 6.647-991.0 7,5 m AU 6.647-992.0 7,5 m 15 EN