GNC P10 Operation And Parts Manual

Complete pressure regulator (unassembled) 43-810-250 PRESSURE REGULATOR REBUILD KIT: Upper Metal, Spring, Under Metal, Packing, Spindle Guide, Oil Seal, Box, Spindle, Ball Valve, O-Ring, Ball Valve Seat (ref# 113-119, 121-124) 43-810-325 PACKING REPAIR KIT: 9 V Packings, 3 Crown Nuts, 3 Grease Rings, 3 Water Stopping Rings, 3 Grease Packings (ref# 43-48) 43-810-350 (ref# 53) VALVE REPAIR KIT: 6 Valves, 6 Seals(Valve Box, Spring Valve, Valve Flat, Valve Seat, Valve Ring, Valve Seal) 43-810-380 PUMP REBUILD KIT: 3 Crown Nuts, 3 Grease Ri ...

2 7 2 1 2 2 2 7 3 1 C o n n e c tin g R o d A s s 'y 4 3 2 5 2 6 C e ra m ic P lu n g e r A s s 'y 2 8 3 0 3 2 3 3 3 5 3 4 2 9 A Page 9 ...

Each cylinder is equipped with a grease cup to prevent premature plunger and packing wear. Each cup must be filled with grease on the initial starting of the sprayer unit and filled weekly if necessary. PUMP REPAIR TO REPLACE PUMP PISTON PACKING 1. Unscrew the nuts located underneath the cylinder (ref # 49) and remove the discharge metal/manifold (item #71). 2. Unscrew the bolts (ref # 62) and remove the suction metal/manifold (ref # 60). 3. Unscrew the nuts (ref # 52) that hold the cylinder (ref # 49) on, and then the cylinder (ref # 49) should slide off the pistons. ...

15,16 Ref: 1,2, 3, 4, 5, 6, 10, 11, 12, 13, 14, 15, 16 Abnormal Vibration No Liquid at Spray Gun Abnormal Pump Noise Ref: 2, 11, 14, 15, 16 Ref: 2, 3, 7, 8, 11, 15, 16 Abnormal Suction Low or Lost Pressure Ref: 9 Page 5 ...