Harbor Freight Tools 66197 Set Up And Operating Instructions

66197 SEt Up ANd OpErAtINg INStrUCtIONS distributed exclusively by Harbor Freight tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury. SAVE tHIS MANUAL. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353.

Page 2 SAVE tHIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly, inspec- tion, maintenance, and cleaning proce- dures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no num- ber). Keep this manual and the receipt in a safe and dry place for future reference. IMpOrtANt SAFEtY INFOrMAtION In this manual, on the labeling, and all other information provid- ed with this product: this is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. dANgEr indicates a hazardous situation which, if not avoided, will result in death or serious injury. WArNINg indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUtION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOtICE is used to address practices not related to personal injury. CAUtION, without the safety alert symbol, is used to address practices not related to personal injury. general Safety Warnings WArNINg read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. Assembly and location safety: 1. Keep the assembly area and prod- a. uct use area clean and well lit. Cluttered or dark areas invite acci- dents. Keep children and bystanders b. away while assembling this Bench. Distractions can cause you to lose control. personal safety: 2. Stay alert, watch what you are do- a. ing and use common sense when assembling and using this Bench. do not assemble or use this prod- uct while you are under the influ- ence of drugs, alcohol or medica- tion. A moment of inattention while assembling or using this Bench may result in serious personal injury. Use personal protective equip- b. ment when assembling this Bench. Make sure to wear ANSI-approved safety goggles.

Page 3 product use and care: 3. Maintain this Bench. Check for a. misaligned, broken, or loose parts and any other condition that may affect the product’s safety. If dam- aged, have the Bench repaired before use. Many accidents are caused by poorly maintained prod- ucts. Assemble and use this Bench in b. accordance with these instruc- tions. Use of this product for rea- sons different from those intended could result in a hazardous situation. Specific Safety Warnings Maintain labels and nameplates on 1. the Bench. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Make sure to install this Bench on 2. a clean, dry, flat, level surface ca- pable of supporting the weight of the Bench and its contents. NEVEr exceed the total maximum 3. weight capacity of this Bench (880 pounds). Also, make sure the weight is distributed evenly on the Bench. NEVEr allow people or pets to 4. stand or climb on this Bench. Adults only should assemble and 5. transport this Bench to the user location. When in use, make sure all Legs of 6. this Bench are flat on a level sur- face. this product is not a toy. 7. Children should use this Bench only under adult supervision. the warnings, precautions, and 8. instructions discussed in this in- struction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the product user that com- mon sense and caution are factors which cannot be built into this prod- uct, but must be supplied by the user. SAVE tHESE INStrUCtIONS. prOdUCt SpECIFICAtIONS Product Applications Designed for indoor and outdoor use. (Will Not Rust) Maximum Weight Capacity 880 Pounds (Distributed Evenly) Construction Materials Bench: All Aluminum (Black Enamel Finish). Hardware: Low Carbon Steel (Zinc Plated). End Caps/Feet: Black Polyethylene Plastic. Assembled Dimensions 47-1/2” L x 14-1/8” W x 15-5/8” H (Approx.) UNpACKINg When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Page 4 ASSEMBLY INStrUCtIONS read the ENtIrE IMpOrtANt SAFEtY INFOrMAtION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Insert the Horizontal Support Beam 1. (4) through the opening in the Center Leg (3). (See Figure A.) Align the end of the Horizontal Sup- 2. port Beam (4) with the two pre-drilled holes in the End Leg (2). NOTE: Make sure the indented area of the End Leg is facing inward. Secure the End Leg to the Horizon- 3. tal Support Beam, using two Insert Screws (8). Then cover the two Screws by inserting two Insert Caps (9) in the pre-drilled holes. Repeat this procedure for the remaining End Leg. (See Figure A.) Attach the Bench Top (1) to the Cen- 4. ter Leg (3) and the two End Legs (2) using six Bolts (5), twelve Washers (6), and six Nuts (7). (See Figure A.) Insert two Leg Caps (10) into the bot- 5. toms of the Center Leg (3) and the two End Legs (2). (See Figure A.) BENCH tOp (1) CENtEr LEg (3) ENd LEg (2) ENd LEg (2) HOrIZONtAL SUppOrt BEAM (4) LEg CAp (10) BOLtS (5) WASHErS (6) NUtS (7) INSErt SCrEWS (8) INSErt CApS (9) BOLtS (5) WASHErS (6) NUtS (7) INSErt SCrEWS (8) INSErt CApS (9) FIgUrE A

Page 5 MAINtENANCE ANd CLEANINg Procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVENt SErIOUS INjUrY: do not use damaged equipment. If a problem with this product occurs, have the problem corrected before further use. BEFOrE EACH USE, 1. inspect the general condition of the Bench. Check for loose bolts and screws, misalignment of parts, cracked or broken parts, and any other condition that may affect its safe use. AFtEr USE, 2. clean external surfaces of the Bench with a clean cloth. pErIOdICALLY, 3. check all hardware (bolts, screws, nuts) to make sure they are tight. pLEASE rEAd tHE FOLLOWINg CArEFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. part # description Qty. part # description Qty. 1 Bench Top 1 7 Nut 6 2 End Leg 2 8 Insert Screw 4 3 Center Leg 1 9 Insert Cap 4 4 Horizontal Support Beam 1 10 Leg Cap 10 5 Bolt 6 11 Wrench (not shown) 2 6 Washer 12 pArtS LISt record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts.