Keyscan Aurora IOCB1616 Installation Manual

11 Hardware The following reviews the hardware setup for the IOCB1616. Please be sure to review J17 to set the correct input/output assignments and the class of input and J16 to set the main control board. Diagrams for power, communication, inputs and outputs are also included. J17 – IOCB1616 Address Chart Jumper J17 on the IOCB1616 determines the circuit board's input/output assignments and input supervision. Table 1 reviews the Input/Output assignments and table reviews the input supervision selections. Jumper Off Off = 0 Jumper On On = 1 5 4 3 2 ...

10 3. Below the IOCB Outputs heading, click in the box to the left of the access control unit/IOCB Output #.  If you are assigning multiple IOCB outputs to the same schedule, click in the box of each applicable output. The box has an x when selected. 4. Click on the symbol to the right of Schedule, and select the schedule from the drop down list. 5. Click on the Assign to Selected IOCB Devices button. 6. Click on the Save button. 7. Click on the Back button to until you return to the main screen or the navigation history symbol for a previously viewe ...

8 Set Mode to “Not Used” When Default Input # & Output # Row Don’t Apply Steps to Assign Inputs to Outputs and Set Modes 1. Select the Rules tab.  If you are at the Client main screen, select the Site Management button > Hardware Setup > select the site if you have multiple sites > double click on the control unit that is connected to the IOCB1616 in the All Hardware screen > select the IOCB1616 tab > select the Rules tab. 2. Click on the row with the first applicable primary input to be assigned to an output. The row is highlighted in blue. 3. ...