Infinite Peripherals Infinea X Operation & User’s Manual

Page 2 of 34 UM-00001 Version: C CONTACT INFORMATION Mobility Sales/ Technical Support Center: Infinite Peripherals, Inc. 17681 Mitchell N Irvine, CA 92614 Toll Free: (866) 278-7860 Office: (949) 222-0300 Headquarters/Main Warehouse Infinite Peripherals, Inc. 2312 Touhy Ave. Elk Grove Village, IL 60007 Toll Free: (800) 278-7860 Office: (847) 818-1260 Fax: (847) 818-1287 [email protected] ipcmobile.com Note: iOS device and other additional items shown on cover page sold separately. ...

Page 18 of 34 UM-00001 Version: C POWERING ON YOUR INFINEA X Dual Purpose Scan Button The Infinea X uses a dual-purpose Scan/Power button to power on the Infinea X unit, as well as to scan barcodes. When the Infinea X is left idling for an extended period, the unit automatically goes into sleep mode to preserve the charge of the battery. Power On When the Infinea X is in the Off/Sleep mode, press the Scan/Power button to power on the unit. A single beep indicates the Infinea X is ready for use. Pressing the scan button a second time will activate the scanner for normal ...

Page 15 of 34 UM-00001 Version: C CHARGING YOUR INFINEA X There are two options for charging the Infinea X: • By wall outlet • By replacing battery The Infinea X supports pass through charging to the iOS device. An iPod or iPhone and Infinea X combination may be charged by attaching the Charging Cup to the bottom of the Infinea X and USB end into an AC wall adapter or by station charger. Due to charging requirements, the Infinea X and iPod or iPhone combination cannot be charged with a USB cable to a PC. Battery Specifications The Infinea X standard battery has a ca ...

Page 22 of 34 UM-00001 Version: C Rear Speaker/Microphone Status The Infinea X provides application developers with a programmable feature to Enable/Disable the Infinea X rear speaker and microphone. When the speaker is enabled, a single blue LED is lit on the right side of the unit, as shown in the figure below. Figure 12: Speaker/Microphone Status Manually Enable/Disable Rear Speaker To disable the rear speaker manually, press the lower right button to toggle the rear speaker mode. Speaker/Mic Mode Speaker/Mic LED Enabled On Disabled Off ...