inDESIGN iDH-10-1 Manual 

Thank you for choosing inDESIGN Horn Speakers. To obtain maximum effect and to ensure correct use of the speaker, please follow the instructions in this manual carefully. Keep this manual for future reference. To Operate: 1. Pay careful attention to the speakers polarity when more than 2 speakers are in operation in the same area, otherwise you may end up with inferior sound or low-level sound output. 2. For low impedance connection, total impedance of speakers should be equal to output impedance of the amplifier. 3. Connect the speakers so that the total input power (wattage) is equal to, or less than, the output power of the amplifier for high impedance connection. 4. When setting the power tap switch, be sure to use the proper positions for 100 V systems to prevent horn damage. (FOR iDH-10-1, iDH-30-1) To Change Impedance: * See instructions on HORN SPEAKER LABEL. 1

10/5/2.5/1.25 W 30/15/7.5/3.75 W Frequency Range 400 Hz - 10 kHz 400 Hz - 10 kHz SPL (@1W/m) 105 dB 108 dB Dimensions Ø x D (mm) Ø143 x 210 mm Ø240 x 303 mm Material ABS ABS Colour RAL9013 RAL9013 Specifications 2